From: Vu Nguyen <vungu...@os.amperecomputing.com>
The DwGpioLib library provides basic functions to control the GPIO
controller on Ampere Altra processor.
Cc: Thang Nguyen <th...@os.amperecomputing.com>
Cc: Chuong Tran <chu...@os.amperecomputing.com>
Cc: Phong Vo <ph...@os.amperecomputing.com>
Cc: Leif Lindholm <l...@nuviainc.com>
Cc: Michael D Kinney <michael.d.kin...@intel.com>
Cc: Ard Biesheuvel <ardb+tianoc...@kernel.org>
Cc: Nate DeSimone <nathaniel.l.desim...@intel.com>
Signed-off-by: Vu Nguyen <vungu...@os.amperecomputing.com>
Reviewed-by: Leif Lindholm <l...@nuviainc.com>
---
Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec | 3 +
Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf | 33 ++
Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h | 76 +++++
Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c | 314
++++++++++++++++++++
4 files changed, 426 insertions(+)
diff --git a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
index 8be6a329bb26..be827dd19a96 100644
--- a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
+++ b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
@@ -31,6 +31,9 @@ [LibraryClasses]
## @libraryclass Defines a set of methods to read/write to I2C devices.
I2cLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/I2cLib.h
+ ## @libraryclass Defines a set of methods to get/set GPIO.
+ GpioLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
+
## @libraryclass Defines a set of methods to communicate with secure
parition over MM interface.
MmCommunicationLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/MmCommunicationLib.h
diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf
b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf
new file mode 100644
index 000000000000..36ce0c3be2c8
--- /dev/null
+++ b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf
@@ -0,0 +1,33 @@
+## @file
+# Component description for DwGpioLib library for the Designware GPIO
controller.
+#
+# Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = DwGpioLib
+ FILE_GUID = E7D9CAE1-6930-46E3-BDF9-0027446E7DF2
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = GpioLib
+
+[Sources.common]
+ DwGpioLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ IoLib
+
+[Guids]
+ gEfiEventVirtualAddressChangeGuid
diff --git a/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
b/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
new file mode 100644
index 000000000000..cb201bc98322
--- /dev/null
+++ b/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
@@ -0,0 +1,76 @@
+/** @file
+ Library implementation for the Designware GPIO controller.
+
+ Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef GPIO_LIB_H_
+#define GPIO_LIB_H_
+
+enum SocGpioConfigMode {
+ GPIO_CONFIG_OUT_LOW = 0,
+ GPIO_CONFIG_OUT_HI,
+ GPIO_CONFIG_OUT_LOW_TO_HIGH,
+ GPIO_CONFIG_OUT_HIGH_TO_LOW,
+ GPIO_CONFIG_IN,
+ MAX_GPIO_CONFIG_MODE
+};
+
+/*
+ * GpioWriteBit: Use to Set/Clear GPIOs
+ * Input:
+ * Pin : Pin Identification
+ * Val : 1 to Set, 0 to Clear
+ */
+VOID
+EFIAPI
+GpioWriteBit (
+ IN UINT32 Pin,
+ IN UINT32 Val
+ );
+
+/*
+ * GpioReadBit:
+ * Input:
+ * Pin : Pin Identification
+ * Return:
+ * 1 : On/High
+ * 0 : Off/Low
+ */
+UINTN
+EFIAPI
+GpioReadBit (
+ IN UINT32 Pin
+ );
+
+/*
+ * GpioModeConfig: Use to configure GPIOs as Input/Output
+ * Input:
+ * Pin : Pin Identification
+ * InOut : GPIO_OUT/1 as Output
+ * GPIO_IN/0 as Input
+ */
+EFI_STATUS
+EFIAPI
+GpioModeConfig (
+ UINT8 Pin,
+ UINTN Mode
+ );
+
+/*
+ * Setup a controller that to be used in runtime service.
+ * Input:
+ * Pin: Pin belongs to the controller.
+ * return: 0 for success.
+ * Otherwise, error code.
+ */
+EFI_STATUS
+EFIAPI
+GpioSetupRuntime (
+ IN UINT32 Pin
+ );
+
+#endif /* GPIO_LIB_H_ */
diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c
b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c
new file mode 100644
index 000000000000..dbb53f7d57d2
--- /dev/null
+++ b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c
@@ -0,0 +1,314 @@
+/** @file
+
+ Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiDxe.h>
+#include <Uefi.h>
+
+#include <Library/DebugLib.h>
+#include <Library/GpioLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeLib.h>
+#include <Platform/Ac01.h>
+
+/* Runtime needs to be 64K alignment */
+#define RUNTIME_ADDRESS_MASK (~(SIZE_64KB - 1))
+#define RUNTIME_ADDRESS_LENGTH SIZE_64KB
+
+#define GPIO_MUX_VAL(Gpio) (0x00000001 << (Gpio))
+#define GPIO_IN 0
+#define GPIO_OUT 1
+
+/* Address GPIO_REG Registers */
+#define GPIO_SWPORTA_DR_ADDR 0x00000000
+#define GPIO_SWPORTA_DDR_ADDR 0x00000004
+#define GPIO_EXT_PORTA_ADDR 0x00000050
+
+STATIC UINT64 GpioBaseAddr[] = { GPIO_DWAPB_BASE_ADDR };
+STATIC UINT64 GpiBaseAddr[] = { GPI_DWAPB_BASE_ADDR };
+STATIC BOOLEAN GpioRuntimeEnableArray[sizeof (GpioBaseAddr) / sizeof
(GpioBaseAddr[0])] = { FALSE };
+STATIC EFI_EVENT mVirtualAddressChangeEvent = NULL;
+
+UINT64
+GetBaseAddr (
+ IN UINT32 Pin
+ )
+{
+ UINT32 NumberOfControllers = sizeof (GpioBaseAddr) / sizeof
(GpioBaseAddr[0]);
+ UINT32 TotalPins = GPIO_DWAPB_PINS_PER_CONTROLLER * NumberOfControllers;
+
+ if (NumberOfControllers == 0 || Pin >= TotalPins) {
+ return 0;
+ }
+
+ return GpioBaseAddr[Pin / GPIO_DWAPB_PINS_PER_CONTROLLER];
+}
+
+VOID
+GpioWrite (
+ IN UINT64 Base,
+ IN UINT32 Val
+ )
+{
+ MmioWrite32 ((UINTN)Base, Val);
+}
+
+VOID
+GpioRead (
+ IN UINT64 Base,
+ OUT UINT32 *Val
+ )
+{
+ ASSERT (Val != NULL);
+ *Val = MmioRead32 (Base);
+}
+
+VOID
+EFIAPI
+GpioWriteBit (
+ IN UINT32 Pin,
+ IN UINT32 Val
+ )
+{
+ UINT64 Reg;
+ UINT32 GpioPin;
+ UINT32 ReadVal;
+
+ Reg = GetBaseAddr (Pin);
+ if (Reg == 0) {
+ return;
+ }
+
+ GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
+
+ Reg += GPIO_SWPORTA_DR_ADDR;
+ GpioRead (Reg, &ReadVal);
+
+ if (Val != 0) {
+ GpioWrite (Reg, ReadVal | GPIO_MUX_VAL (GpioPin));
+ } else {
+ GpioWrite (Reg, ReadVal & ~GPIO_MUX_VAL (GpioPin));
+ }
+}
+
+UINTN
+EFIAPI
+GpioReadBit (
+ IN UINT32 Pin
+ )
+{
+ UINT64 Reg;
+ UINT32 Val;
+ UINT32 GpioPin;
+ UINT8 Index;
+ UINT32 MaxIndex;
+
+ Reg = GetBaseAddr (Pin);
+ if (Reg == 0) {
+ return 0;
+ }
+
+ GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
+
+ /* Check if a base address is GPI */
+ MaxIndex = sizeof (GpiBaseAddr) / sizeof (GpiBaseAddr[0]);
+ for (Index = 0; Index < MaxIndex; Index++) {
+ if (Reg == GpiBaseAddr[Index]) {
+ break;
+ }
+ }
+ if (Index == MaxIndex) {
+ /* Only GPIO has GPIO_EXT_PORTA register, not for GPI */
+ Reg += GPIO_EXT_PORTA_ADDR;
+ }
+
+ GpioRead (Reg, &Val);
+
+ return Val & GPIO_MUX_VAL (GpioPin) ? 1 : 0;
+}
+
+EFI_STATUS
+GpioConfig (
+ IN UINT32 Pin,
+ IN UINT32 InOut
+ )
+{
+ INTN GpioPin;
+ UINT32 Val;
+ UINT64 Reg;
+
+ /*
+ * Caculate GPIO Pin Number for Direction Register
+ * GPIO_SWPORTA_DDR for GPIO[31...0]
+ * GPIO_SWPORTB_DDR for GPIO[51...32]
+ */
+
+ Reg = GetBaseAddr (Pin);
+ if (Reg == 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ Reg += GPIO_SWPORTA_DDR_ADDR;
+ GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
+ GpioRead (Reg, &Val);
+
+ if (InOut == GPIO_OUT) {
+ Val |= GPIO_MUX_VAL (GpioPin);
+ } else {
+ Val &= ~GPIO_MUX_VAL (GpioPin);
+ }
+ GpioWrite (Reg, Val);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+GpioModeConfig (
+ UINT8 Pin,
+ UINTN Mode
+ )
+{
+ UINT32 NumberOfControllers = sizeof (GpioBaseAddr) / sizeof (UINT64);
+ UINT32 NumersOfPins = NumberOfControllers * GPIO_DWAPB_PINS_PER_CONTROLLER;
+ UINT32 Delay = 10;
+
+ if (Mode < GPIO_CONFIG_OUT_LOW
+ || Mode >= MAX_GPIO_CONFIG_MODE
+ || Pin > NumersOfPins - 1
+ || Pin < 0)
+ {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ switch (Mode) {
+ case GPIO_CONFIG_OUT_LOW:
+ GpioConfig (Pin, GPIO_OUT);
+ GpioWriteBit (Pin, 0);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output low\n", Pin));
+ break;
+
+ case GPIO_CONFIG_OUT_HI:
+ GpioConfig (Pin, GPIO_OUT);
+ GpioWriteBit (Pin, 1);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output high\n", Pin));
+ break;
+
+ case GPIO_CONFIG_OUT_LOW_TO_HIGH:
+ GpioConfig (Pin, GPIO_OUT);
+ GpioWriteBit (Pin, 0);
+ MicroSecondDelay (1000 * Delay);
+ GpioWriteBit (Pin, 1);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output low->high\n", Pin));
+ break;
+
+ case GPIO_CONFIG_OUT_HIGH_TO_LOW:
+ GpioConfig (Pin, GPIO_OUT);
+ GpioWriteBit (Pin, 1);
+ MicroSecondDelay (1000 * Delay);
+ GpioWriteBit (Pin, 0);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output high->low\n", Pin));
+ break;
+
+ case GPIO_CONFIG_IN:
+ GpioConfig (Pin, GPIO_IN);
+ DEBUG ((DEBUG_INFO, "GPIO pin %d configured as input\n", Pin));
+ break;
+
+ default:
+ break;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ * Notification function of EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE.
+ *
+ * This is a notification function registered on
EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
+ * It convers pointer to new virtual address.
+ *
+ * @param Event Event whose notification function is being invoked.
+ * @param Context Pointer to the notification function's context.
+ */
+VOID
+EFIAPI
+GpioVirtualAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ UINTN Count;
+
+ EfiConvertPointer (0x0, (VOID **)&GpioBaseAddr);
+ for (Count = 0; Count < sizeof (GpioBaseAddr) / sizeof (GpioBaseAddr[0]);
Count++) {
+ if (!GpioRuntimeEnableArray[Count]) {
+ continue;
+ }
+ EfiConvertPointer (0x0, (VOID **)&GpioBaseAddr[Count]);
+ }
+}
+
+/**
+ Setup a controller that to be used in runtime service.
+
+ @Bus: Bus ID.
+ @return: 0 for success.
+ Otherwise, error code.
+ **/
+EFI_STATUS
+EFIAPI
+GpioSetupRuntime (
+ IN UINT32 Pin
+ )
+{
+ EFI_STATUS Status;
+ EFI_GCD_MEMORY_SPACE_DESCRIPTOR Descriptor;
+
+ if (GetBaseAddr (Pin) == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (mVirtualAddressChangeEvent == NULL) {
+ /*
+ * Register for the virtual address change event
+ */
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ GpioVirtualAddressChangeEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &mVirtualAddressChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ Status = gDS->GetMemorySpaceDescriptor (
+ GetBaseAddr (Pin) & RUNTIME_ADDRESS_MASK,
+ &Descriptor
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gDS->SetMemorySpaceAttributes (
+ GetBaseAddr (Pin) & RUNTIME_ADDRESS_MASK,
+ RUNTIME_ADDRESS_LENGTH,
+ Descriptor.Attributes | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ GpioRuntimeEnableArray[Pin / GPIO_DWAPB_PINS_PER_CONTROLLER] = TRUE;
+
+ return Status;
+}
--
2.17.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#80707): https://edk2.groups.io/g/devel/message/80707
Mute This Topic: https://groups.io/mt/85631138/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
