From: Tom Lendacky <thomas.lenda...@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Use the SEV-SNP AP Creation NAE event to create and launch APs under
SEV-SNP. This capability will be advertised in the SEV Hypervisor
Feature Support PCD (PcdSevEsHypervisorFeatures).
Cc: Eric Dong <eric.d...@intel.com>
Cc: Ray Ni <ray...@intel.com>
Cc: Laszlo Ersek <ler...@redhat.com>
Cc: Rahul Kumar <rahul1.ku...@intel.com>
Signed-off-by: Tom Lendacky <thomas.lenda...@amd.com>
---
UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 3 +
UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 5 +-
UefiCpuPkg/Library/MpInitLib/MpLib.h | 17 ++
UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 11 +-
.../MpInitLib/Ia32/SevSnpRmpAdjustInternal.c | 31 ++
UefiCpuPkg/Library/MpInitLib/MpLib.c | 274 ++++++++++++++++--
.../MpInitLib/X64/SevSnpRmpAdjustInternal.c | 44 +++
7 files changed, 360 insertions(+), 25 deletions(-)
create mode 100644 UefiCpuPkg/Library/MpInitLib/Ia32/SevSnpRmpAdjustInternal.c
create mode 100644 UefiCpuPkg/Library/MpInitLib/X64/SevSnpRmpAdjustInternal.c
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
index 48d7dfa4450f..b9ce05e81b54 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
@@ -23,9 +23,11 @@ [Defines]
[Sources.IA32]
Ia32/MpFuncs.nasm
+ Ia32/SevSnpRmpAdjustInternal.c
[Sources.X64]
X64/MpFuncs.nasm
+ X64/SevSnpRmpAdjustInternal.c
[Sources.common]
MpEqu.inc
@@ -72,6 +74,7 @@ [Pcd]
gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode ##
CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate ##
SOMETIMES_CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApStatusCheckIntervalInMicroSeconds ##
CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdGhcbHypervisorFeatures ##
CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled ##
CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase ##
SOMETIMES_CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard ##
CONSUMES
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
index ab8279df596f..35057ac07cbb 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
@@ -23,9 +23,11 @@ [Defines]
[Sources.IA32]
Ia32/MpFuncs.nasm
+ Ia32/SevSnpRmpAdjustInternal.c
[Sources.X64]
X64/MpFuncs.nasm
+ X64/SevSnpRmpAdjustInternal.c
[Sources.common]
MpEqu.inc
@@ -62,10 +64,11 @@ [Pcd]
gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate ##
SOMETIMES_CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdGhcbHypervisorFeatures ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase ##
SOMETIMES_CONSUMES
- gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdSevSnpIsEnabled ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase ## CONSUMES
[Ppis]
gEdkiiPeiShadowMicrocodePpiGuid ## SOMETIMES_CONSUMES
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h
b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 4abaa2243d0a..b49a60ac0ce5 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -15,6 +15,7 @@
#include <Register/Intel/Cpuid.h>
#include <Register/Amd/Cpuid.h>
+#include <Register/Amd/Ghcb.h>
#include <Register/Intel/Msr.h>
#include <Register/Intel/LocalApic.h>
#include <Register/Intel/Microcode.h>
@@ -146,6 +147,7 @@ typedef struct {
UINT8 PlatformId;
UINT64 MicrocodeEntryAddr;
UINT32 MicrocodeRevision;
+ SEV_ES_SAVE_AREA *SevEsSaveArea;
} CPU_AP_DATA;
//
@@ -289,6 +291,7 @@ struct _CPU_MP_DATA {
BOOLEAN SevEsIsEnabled;
BOOLEAN SevSnpIsEnabled;
+ BOOLEAN UseSevEsAPMethod;
UINTN SevEsAPBuffer;
UINTN SevEsAPResetStackStart;
CPU_MP_DATA *NewCpuMpData;
@@ -743,5 +746,19 @@ PlatformShadowMicrocode (
IN OUT CPU_MP_DATA *CpuMpData
);
+/**
+ Issue RMPADJUST to adjust the attributes of an SEV-SNP page.
+
+ @param[in] PageAddress
+ @param[in] VmsaPage
+
+ @return RMPADJUST return value
+**/
+UINT32
+SevSnpRmpAdjust (
+ IN EFI_PHYSICAL_ADDRESS PageAddress,
+ IN BOOLEAN VmsaPage
+ );
+
#endif
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
index 7839c249760e..1e3e71766611 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
@@ -88,7 +88,12 @@ GetWakeupBuffer (
EFI_PHYSICAL_ADDRESS StartAddress;
EFI_MEMORY_TYPE MemoryType;
- if (PcdGetBool (PcdSevEsIsEnabled)) {
+ //
+ // An SEV-ES-only guest requires the memory to be reserved. SEV-SNP, which
+ // is also considered SEV-ES, uses a different AP startup method, though,
+ // which does not have the same requirement.
+ //
+ if (PcdGetBool (PcdSevEsIsEnabled) && !PcdGetBool (PcdSevSnpIsEnabled)) {
MemoryType = EfiReservedMemoryType;
} else {
MemoryType = EfiBootServicesData;
@@ -356,7 +361,7 @@ RelocateApLoop (
MpInitLibWhoAmI (&ProcessorNumber);
CpuMpData = GetCpuMpData ();
MwaitSupport = IsMwaitSupport ();
- if (CpuMpData->SevEsIsEnabled) {
+ if (CpuMpData->UseSevEsAPMethod) {
StackStart = CpuMpData->SevEsAPResetStackStart;
} else {
StackStart = mReservedTopOfApStack;
@@ -405,7 +410,7 @@ MpInitChangeApLoopCallback (
CpuPause ();
}
- if (CpuMpData->SevEsIsEnabled && (CpuMpData->WakeupBuffer != (UINTN) -1)) {
+ if (CpuMpData->UseSevEsAPMethod && (CpuMpData->WakeupBuffer != (UINTN) -1)) {
//
// There are APs present. Re-use reserved memory area below 1MB from
// WakeupBuffer as the area to be used for transitioning to 16-bit mode
diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/SevSnpRmpAdjustInternal.c
b/UefiCpuPkg/Library/MpInitLib/Ia32/SevSnpRmpAdjustInternal.c
new file mode 100644
index 000000000000..167628b696f2
--- /dev/null
+++ b/UefiCpuPkg/Library/MpInitLib/Ia32/SevSnpRmpAdjustInternal.c
@@ -0,0 +1,31 @@
+/** @file
+
+ RMPADJUST helper function.
+
+ Copyright (c) 2021, AMD Incorporated. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "MpLib.h"
+
+/**
+ Issue RMPADJUST to adjust the attributes of an SEV-SNP page.
+
+ @param[in] PageAddress
+ @param[in] VmsaPage
+
+ @return RMPADJUST return value
+**/
+UINT32
+SevSnpRmpAdjust (
+ IN EFI_PHYSICAL_ADDRESS PageAddress,
+ IN BOOLEAN VmsaPage
+ )
+{
+ //
+ // RMPADJUST is not supported in 32-bit mode
+ //
+ return RETURN_UNSUPPORTED;
+}
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index 7cbcce101414..5a06e21a2830 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -15,7 +15,6 @@
EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;
-
/**
The function will check if BSP Execute Disable is enabled.
@@ -297,8 +296,8 @@ GetApLoopMode (
if (PcdGetBool (PcdSevEsIsEnabled)) {
//
- // For SEV-ES, force AP in Hlt-loop mode in order to use the GHCB
- // protocol for starting APs
+ // For SEV-ES (SEV-SNP is also considered SEV-ES), force AP in Hlt-loop
+ // mode in order to use the GHCB protocol for starting APs
//
ApLoopMode = ApInHltLoop;
}
@@ -869,7 +868,7 @@ ApWakeupFunction (
// to allow the APs to issue an AP_RESET_HOLD before the BSP possibly
// performs another INIT-SIPI-SIPI sequence.
//
- if (!CpuMpData->SevEsIsEnabled) {
+ if (!CpuMpData->UseSevEsAPMethod) {
InterlockedDecrement ((UINT32 *)
&CpuMpData->MpCpuExchangeInfo->NumApsExecuting);
}
}
@@ -883,7 +882,7 @@ ApWakeupFunction (
//
while (TRUE) {
DisableInterrupts ();
- if (CpuMpData->SevEsIsEnabled) {
+ if (CpuMpData->UseSevEsAPMethod) {
MSR_SEV_ES_GHCB_REGISTER Msr;
GHCB *Ghcb;
UINT64 Status;
@@ -1167,9 +1166,11 @@ GetApResetVectorSize (
//
// The AP reset stack is only used by SEV-ES guests. Do not add to the
- // allocation if SEV-ES is not enabled.
+ // allocation if SEV-ES is not enabled. An SEV-SNP guest is also considered
+ // an SEV-ES guest, but uses a different method of AP startup, eliminating
+ // the need for the allocation.
//
- if (PcdGetBool (PcdSevEsIsEnabled)) {
+ if (PcdGetBool (PcdSevEsIsEnabled) && !PcdGetBool (PcdSevSnpIsEnabled)) {
//
// Stack location is based on APIC ID, so use the total number of
// processors for calculating the total stack area.
@@ -1231,7 +1232,7 @@ FreeResetVector (
// perform the restore as this will overwrite memory which has data
// needed by SEV-ES.
//
- if (!CpuMpData->SevEsIsEnabled) {
+ if (!CpuMpData->UseSevEsAPMethod) {
RestoreWakeupBuffer (CpuMpData);
}
}
@@ -1248,7 +1249,7 @@ AllocateSevEsAPMemory (
{
if (CpuMpData->SevEsAPBuffer == (UINTN) -1) {
CpuMpData->SevEsAPBuffer =
- CpuMpData->SevEsIsEnabled ? GetSevEsAPMemory () : 0;
+ CpuMpData->UseSevEsAPMethod ? GetSevEsAPMemory () : 0;
}
}
@@ -1301,6 +1302,222 @@ SetSevEsJumpTable (
JmpFar->Segment = (UINT16) (SipiVector >> 4);
}
+/**
+ Create an SEV-SNP AP save area (VMSA) for use in running the vCPU.
+
+ @param[in] CpuMpData Pointer to CPU MP Data
+ @param[in] CpuData Pointer to CPU AP Data
+ @param[in] ApicId APIC ID of the vCPU
+**/
+STATIC
+VOID
+SevSnpCreateSaveArea (
+ IN CPU_MP_DATA *CpuMpData,
+ IN CPU_AP_DATA *CpuData,
+ UINT32 ApicId
+ )
+{
+ SEV_ES_SAVE_AREA *SaveArea;
+ IA32_CR0 ApCr0;
+ IA32_CR0 ResetCr0;
+ IA32_CR4 ApCr4;
+ IA32_CR4 ResetCr4;
+ UINTN StartIp;
+ UINT8 SipiVector;
+ UINT32 RmpAdjustStatus;
+ UINT64 VmgExitStatus;
+ MSR_SEV_ES_GHCB_REGISTER Msr;
+ GHCB *Ghcb;
+ BOOLEAN InterruptState;
+ UINT64 ExitInfo1;
+ UINT64 ExitInfo2;
+
+ //
+ // Allocate a single page for the SEV-ES Save Area and initialize it.
+ //
+ SaveArea = AllocateReservedPages (1);
+ if (!SaveArea) {
+ return;
+ }
+ ZeroMem (SaveArea, EFI_PAGE_SIZE);
+
+ //
+ // Propogate the CR0.NW and CR0.CD setting to the AP
+ //
+ ResetCr0.UintN = 0x00000010;
+ ApCr0.UintN = CpuData->VolatileRegisters.Cr0;
+ if (ApCr0.Bits.NW) {
+ ResetCr0.Bits.NW = 1;
+ }
+ if (ApCr0.Bits.CD) {
+ ResetCr0.Bits.CD = 1;
+ }
+
+ //
+ // Propagate the CR4.MCE setting to the AP
+ //
+ ResetCr4.UintN = 0;
+ ApCr4.UintN = CpuData->VolatileRegisters.Cr4;
+ if (ApCr4.Bits.MCE) {
+ ResetCr4.Bits.MCE = 1;
+ }
+
+ //
+ // Convert the start IP into a SIPI Vector
+ //
+ StartIp = CpuMpData->MpCpuExchangeInfo->BufferStart;
+ SipiVector = (UINT8) (StartIp >> 12);
+
+ //
+ // Set the CS:RIP value based on the start IP
+ //
+ SaveArea->Cs.Base = SipiVector << 12;
+ SaveArea->Cs.Selector = SipiVector << 8;
+ SaveArea->Cs.Limit = 0xFFFF;
+ SaveArea->Cs.Attributes.Bits.Present = 1;
+ SaveArea->Cs.Attributes.Bits.Sbit = 1;
+ SaveArea->Cs.Attributes.Bits.Type = SEV_ES_RESET_CODE_SEGMENT_TYPE;
+ SaveArea->Rip = StartIp & 0xFFF;
+
+ //
+ // Set the remaining values as defined in APM for INIT
+ //
+ SaveArea->Ds.Limit = 0xFFFF;
+ SaveArea->Ds.Attributes.Bits.Present = 1;
+ SaveArea->Ds.Attributes.Bits.Sbit = 1;
+ SaveArea->Ds.Attributes.Bits.Type = SEV_ES_RESET_DATA_SEGMENT_TYPE;
+ SaveArea->Es = SaveArea->Ds;
+ SaveArea->Fs = SaveArea->Ds;
+ SaveArea->Gs = SaveArea->Ds;
+ SaveArea->Ss = SaveArea->Ds;
+
+ SaveArea->Gdtr.Limit = 0xFFFF;
+ SaveArea->Ldtr.Limit = 0xFFFF;
+ SaveArea->Ldtr.Attributes.Bits.Present = 1;
+ SaveArea->Ldtr.Attributes.Bits.Type = SEV_ES_RESET_LDT_TYPE;
+ SaveArea->Idtr.Limit = 0xFFFF;
+ SaveArea->Tr.Limit = 0xFFFF;
+ SaveArea->Ldtr.Attributes.Bits.Present = 1;
+ SaveArea->Ldtr.Attributes.Bits.Type = SEV_ES_RESET_TSS_TYPE;
+
+ SaveArea->Efer = 0x1000;
+ SaveArea->Cr4 = ResetCr4.UintN;
+ SaveArea->Cr0 = ResetCr0.UintN;
+ SaveArea->Dr7 = 0x0400;
+ SaveArea->Dr6 = 0xFFFF0FF0;
+ SaveArea->Rflags = 0x0002;
+ SaveArea->GPat = 0x0007040600070406ULL;
+ SaveArea->XCr0 = 0x0001;
+ SaveArea->Mxcsr = 0x1F80;
+ SaveArea->X87Ftw = 0x5555;
+ SaveArea->X87Fcw = 0x0040;
+
+ //
+ // Set the SEV-SNP specific fields for the save area:
+ // VMPL - always VMPL0
+ // SEV_FEATURES - equivalent to the SEV_STATUS MSR right shifted 2 bits
+ //
+ SaveArea->Vmpl = 0;
+ SaveArea->SevFeatures = AsmReadMsr64 (MSR_SEV_STATUS) >> 2;
+
+ //
+ // To turn the page into a recognized VMSA page, issue RMPADJUST:
+ // Target VMPL but numerically higher than current VMPL
+ // Target PermissionMask is not used
+ //
+ RmpAdjustStatus = SevSnpRmpAdjust (
+ (EFI_PHYSICAL_ADDRESS) (UINTN) SaveArea,
+ TRUE
+ );
+ ASSERT (RmpAdjustStatus == 0);
+
+ ExitInfo1 = (UINT64) ApicId << 32;
+ ExitInfo1 |= SVM_VMGEXIT_SNP_AP_CREATE;
+ ExitInfo2 = (UINT64) (UINTN) SaveArea;
+
+ Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
+ Ghcb = Msr.Ghcb;
+
+ VmgInit (Ghcb, &InterruptState);
+ Ghcb->SaveArea.Rax = SaveArea->SevFeatures;
+ VmgSetOffsetValid (Ghcb, GhcbRax);
+ VmgExitStatus = VmgExit (
+ Ghcb,
+ SVM_EXIT_SNP_AP_CREATION,
+ ExitInfo1,
+ ExitInfo2
+ );
+ VmgDone (Ghcb, InterruptState);
+
+ ASSERT (VmgExitStatus == 0);
+ if (VmgExitStatus != 0) {
+ RmpAdjustStatus = SevSnpRmpAdjust (
+ (EFI_PHYSICAL_ADDRESS) (UINTN) SaveArea,
+ FALSE
+ );
+ if (RmpAdjustStatus == 0) {
+ FreePages (SaveArea, 1);
+ } else {
+ DEBUG ((DEBUG_INFO, "SEV-SNP: RMPADJUST failed, leaking VMSA page\n"));
+ }
+
+ SaveArea = NULL;
+ }
+
+ if (CpuData->SevEsSaveArea) {
+ RmpAdjustStatus = SevSnpRmpAdjust (
+ (EFI_PHYSICAL_ADDRESS) (UINTN) CpuData->SevEsSaveArea,
+ FALSE
+ );
+ if (RmpAdjustStatus == 0) {
+ FreePages (CpuData->SevEsSaveArea, 1);
+ } else {
+ DEBUG ((DEBUG_INFO, "SEV-SNP: RMPADJUST failed, leaking VMSA page\n"));
+ }
+ }
+
+ CpuData->SevEsSaveArea = SaveArea;
+}
+
+/**
+ Create SEV-SNP APs.
+
+ @param[in] CpuMpData Pointer to CPU MP Data
+ @param[in] ProcessorNumber The handle number of specified processor
+ (-1 for all APs)
+**/
+STATIC
+VOID
+SevSnpCreateAP (
+ IN CPU_MP_DATA *CpuMpData,
+ IN INTN ProcessorNumber
+ )
+{
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+ CPU_AP_DATA *CpuData;
+ UINTN Index;
+ UINT32 ApicId;
+
+ ASSERT (CpuMpData->MpCpuExchangeInfo->BufferStart < 0x100000);
+
+ CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
+
+ if (ProcessorNumber < 0) {
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
+ if (Index != CpuMpData->BspNumber) {
+ CpuData = &CpuMpData->CpuData[Index];
+ ApicId = CpuInfoInHob[Index].ApicId,
+ SevSnpCreateSaveArea (CpuMpData, CpuData, ApicId);
+ }
+ }
+ } else {
+ Index = (UINTN) ProcessorNumber;
+ CpuData = &CpuMpData->CpuData[Index];
+ ApicId = CpuInfoInHob[ProcessorNumber].ApicId,
+ SevSnpCreateSaveArea (CpuMpData, CpuData, ApicId);
+ }
+}
+
/**
This function will be called by BSP to wakeup AP.
@@ -1332,7 +1549,7 @@ WakeUpAP (
ResetVectorRequired = FALSE;
if (CpuMpData->WakeUpByInitSipiSipi ||
- CpuMpData->InitFlag != ApInitDone) {
+ CpuMpData->InitFlag != ApInitDone) {
ResetVectorRequired = TRUE;
AllocateResetVector (CpuMpData);
AllocateSevEsAPMemory (CpuMpData);
@@ -1373,7 +1590,7 @@ WakeUpAP (
}
if (ResetVectorRequired) {
//
- // For SEV-ES, the initial AP boot address will be defined by
+ // For SEV-ES and SEV-SNP, the initial AP boot address will be defined by
// PcdSevEsWorkAreaBase. The Segment/Rip must be the jump address
// from the original INIT-SIPI-SIPI.
//
@@ -1383,8 +1600,14 @@ WakeUpAP (
//
// Wakeup all APs
+ // Must use the INIT-SIPI-SIPI method for initial configuration in
+ // order to obtain the APIC ID.
//
- SendInitSipiSipiAllExcludingSelf ((UINT32) ExchangeInfo->BufferStart);
+ if (CpuMpData->SevSnpIsEnabled && CpuMpData->InitFlag != ApInitConfig) {
+ SevSnpCreateAP (CpuMpData, -1);
+ } else {
+ SendInitSipiSipiAllExcludingSelf ((UINT32) ExchangeInfo->BufferStart);
+ }
}
if (CpuMpData->InitFlag == ApInitConfig) {
if (PcdGet32 (PcdCpuBootLogicalProcessorNumber) > 0) {
@@ -1474,7 +1697,7 @@ WakeUpAP (
CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
//
- // For SEV-ES, the initial AP boot address will be defined by
+ // For SEV-ES and SEV-SNP, the initial AP boot address will be defined by
// PcdSevEsWorkAreaBase. The Segment/Rip must be the jump address
// from the original INIT-SIPI-SIPI.
//
@@ -1482,10 +1705,14 @@ WakeUpAP (
SetSevEsJumpTable (ExchangeInfo->BufferStart);
}
- SendInitSipiSipi (
- CpuInfoInHob[ProcessorNumber].ApicId,
- (UINT32) ExchangeInfo->BufferStart
- );
+ if (CpuMpData->SevSnpIsEnabled && CpuMpData->InitFlag != ApInitConfig) {
+ SevSnpCreateAP (CpuMpData, (INTN) ProcessorNumber);
+ } else {
+ SendInitSipiSipi (
+ CpuInfoInHob[ProcessorNumber].ApicId,
+ (UINT32) ExchangeInfo->BufferStart
+ );
+ }
}
//
// Wait specified AP waken up
@@ -2016,10 +2243,15 @@ MpInitLibInitialize (
CpuMpData->CpuData = (CPU_AP_DATA *) (CpuMpData + 1);
CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData +
MaxLogicalProcessorNumber);
InitializeSpinLock(&CpuMpData->MpLock);
- CpuMpData->SevEsIsEnabled = PcdGetBool (PcdSevEsIsEnabled);
- CpuMpData->SevSnpIsEnabled = PcdGetBool (PcdSevSnpIsEnabled);
- CpuMpData->SevEsAPBuffer = (UINTN) -1;
- CpuMpData->GhcbBase = PcdGet64 (PcdGhcbBase);
+ CpuMpData->SevEsIsEnabled = PcdGetBool (PcdSevEsIsEnabled);
+ CpuMpData->SevSnpIsEnabled = PcdGetBool (PcdSevSnpIsEnabled);
+ CpuMpData->SevEsAPBuffer = (UINTN) -1;
+ CpuMpData->GhcbBase = PcdGet64 (PcdGhcbBase);
+ CpuMpData->UseSevEsAPMethod = CpuMpData->SevEsIsEnabled &&
!CpuMpData->SevSnpIsEnabled;
+
+ if (CpuMpData->SevSnpIsEnabled) {
+ ASSERT ((PcdGet64 (PcdGhcbHypervisorFeatures) &
GHCB_HV_FEATURES_SNP_AP_CREATE) == GHCB_HV_FEATURES_SNP_AP_CREATE);
+ }
//
// Make sure no memory usage outside of the allocated buffer.
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/SevSnpRmpAdjustInternal.c
b/UefiCpuPkg/Library/MpInitLib/X64/SevSnpRmpAdjustInternal.c
new file mode 100644
index 000000000000..0716a4623e38
--- /dev/null
+++ b/UefiCpuPkg/Library/MpInitLib/X64/SevSnpRmpAdjustInternal.c
@@ -0,0 +1,44 @@
+/** @file
+
+ RMPADJUST helper function.
+
+ Copyright (c) 2021, AMD Incorporated. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "MpLib.h"
+
+/**
+ Issue RMPADJUST to adjust the attributes of an SEV-SNP page.
+
+ @param[in] PageAddress
+ @param[in] VmsaPage
+
+ @return RMPADJUST return value
+**/
+UINT32
+SevSnpRmpAdjust (
+ IN EFI_PHYSICAL_ADDRESS PageAddress,
+ IN BOOLEAN VmsaPage
+ )
+{
+ UINT64 Rdx;
+ UINT8 Vmpl;
+ UINT8 PermissionMask;
+
+ //
+ // Use the highest VMPL level.
+ //
+ PermissionMask = 0;
+ Vmpl = RMPADJUST_VMPL_MAX;
+
+ Rdx = (Vmpl & RMPADJUST_VMPL_MASK) << RMPADJUST_VMPL_SHIFT;
+ Rdx |= (PermissionMask & RMPADJUST_PERMISSION_MASK_MASK) <<
RMPADJUST_PERMISSION_MASK_SHIFT;
+ if (VmsaPage) {
+ Rdx |= RMPADJUST_VMSA_PAGE_BIT;
+ }
+
+ return AsmRmpAdjust ((UINT64) PageAddress, 0, Rdx);
+}
--
2.17.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#75737): https://edk2.groups.io/g/devel/message/75737
Mute This Topic: https://groups.io/mt/83113787/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
