On 5/5/20 3:01 PM, Aditya Angadi via groups.io wrote:
Changes since v4: - Addressed all the comments from Ard. - Split the patches into multiple smaller patches where applicable. - Reworded the commit messages to be more accurate about the change being introduced. - Picked up Ard's review tagsChanges since v3: - Addressed all the comments from Ard. - Each platform with SgiPkg would be built independently of the other. - Removed all references to ACPI tables of platforms that are not part of the build of a platform. - Added support for multi-chip NUMA memory nodes. - Added SRAT table for RdN1EdgeX2 platform. - Did not pickup the review tags from Ard because the code change from last version. This patch series adds support for Arm's RD-Daniel platform. There are two configurations of this platform being added in this series - Config-M and Config-XLR. RD-Daniel is the next Arm's reference design subsystem. Config XLR is a multi chip platform. The first five patches rework the SgiPkg code to move away from being able to build a single binary for all the supported platforms to independent binary for each platform. This was requried as the first step to add newer RD platform support in SgiPkg as these newer platforms have differences in the programming interface. Patches 6 to 11 in the series refactor and consolidate the code in SgiPkg in preparation for adding support for numa memory nodes and the RD-Daniel platform. Patches 12 and 13 in the series add SRAT table for RD-N1-Edge platform and removes the hard-code chip count on the platform. The next four patches add support for the RD-Daniel platforms. There are two configuration of RD-Daniel platform. - RD-Daniel Config-M: This is single chip platform that includes 16 Neoverse cores. - RD-Daniel Config-XLR: This is multi-chip platform that includes four identical chip connected over a coherent link with all the four chips put together into a single package. Each chip includes four Neoverse cores and it attached to 8GB of RAM. Aditya Angadi (15): Platform/ARM/SgiPkg: Create platform specific dsc files Platform/ARM/SgiPkg: Let platforms define core and cluster count Platform/ARM/SgiPkg: Let platforms define GIC related PCD values Platform/ARM/SgiPkg: Create platform specific fd include file Platform/ARM/SgiPkg: Let platform specify the ACPI tables to include Platform/ARM/SgiPkg: Obtain rd-e1-edge platform core count from PCD Platform/ARM/SgiPkg: Refactor GIC related ACPI helper macros Platform/ARM/SgiPkg: Update SGI-575 MADT table to ACPI 6.2 Platform/ARM/SgiPkg: Move common platform description to SSDT Platform/ARM/SgiPkg: Add helper macros for SRAT table Platform/ARM/SgiPkg: Use chip count constant on rdn1edgex2 platform Platform/ARM/SgiPkg: Add ACPI tables for Rd-Daniel Config-M Platform/ARM/SgiPkg: Add initial support for RD-Daniel Config-M platform Platform/ARM/SgiPkg: Add ACPI tables for RD-Daniel Config-XLR Platform/ARM/SgiPkg: Add initial support for RD-Daniel Config-XLR platform Vijayenthiran Subramaniam (2): Platform/ARM/SgiPkg: Add support for remote numa memory nodes Platform/ARM/SgiPkg: Add SRAT table for RdN1Edge dual-chip platform
For the series, Reviewed-by: Ard Biesheuvel <ard.biesheu...@arm.com> Pushed as 03fb86be4146..ca1a7187861c Thanks! -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#58656): https://edk2.groups.io/g/devel/message/58656 Mute This Topic: https://groups.io/mt/73997049/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
