My bad, was checking on a different computer than I thought where the
edk2 checkout wasn't up to date. Still, gives me a way to close out
the stackoverflow question, so thanks :)
/
Leif
On Tue, Apr 28, 2020 at 09:35:22 +0000, Guomin Jiang wrote:
> It is known issue and can refer
> https://bugzilla.tianocore.org/show_bug.cgi?id=2637 for detail.
>
> It have been fixed in newest repository, you can update to the newest
> repository and try again.
>
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> navdeeppal.si...@dell.com
> Sent: Tuesday, April 28, 2020 5:15 PM
> To: spbro...@outlook.com; devel@edk2.groups.io; sean.bro...@microsoft.com;
> bret.barke...@microsoft.com; jim.slaugh...@sage-micro.com
> Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
>
> Hi,
>
> Yes I am using edksetup.bat.
>
> I was able to fix VFR compiler after making path changes.
>
> And I was able to build MdeModulePkg Successfully.
>
> But while building Emulator Pkg. I see the following Linker Error. Do I need
> to build some other module before building Emulator Pkg.
>
>
>
> [cid:image001.jpg@01D61D83.5E9F0750]
>
>
>
> Regards,
>
> Navdeep
>
> -----Original Message-----
> From: Sean Brogan <spbro...@outlook.com<mailto:spbro...@outlook.com>>
> Sent: Tuesday, April 28, 2020 2:28 AM
> To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Singh, Navdeeppal;
> sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com>;
> bret.barke...@microsoft.com<mailto:bret.barke...@microsoft.com>;
> jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com>
> Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
>
>
>
>
> [EXTERNAL EMAIL]
>
>
>
> Are you using edksetup.bat? I would have expected this code to set the path
> for you.
>
> https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat#L134
>
> So without more logs i don't know.
>
>
>
>
>
>
>
> If you want to use "stuart" (my preferred method) I have a commit here for
> EmulatorPkg which has a platformbuild.py and readme.md that describes the
> process. This should be committed to edk2 master this week to enable
> Platform CI for every PR.
>
>
>
> Here is the readme and details.
>
> https://github.com/spbrogan/edk2/tree/PlatformAndCoreCIForOvmfArmVirtEmulatorPackages_v10/EmulatorPkg/PlatformCI
>
>
>
> Here is the commit you should cherry-pick if you want to try it.
>
>
>
> https://github.com/spbrogan/edk2/commit/8bdb9075b52a9d1c196b068729eefd76f068d0a2
>
>
>
>
>
>
>
> Thanks
>
> Sean
>
>
>
>
>
>
>
> On 4/27/2020 1:26 AM,
> navdeeppal.si...@dell.com<mailto:navdeeppal.si...@dell.com> wrote:
>
> > Hi,
>
> >
>
> > Thanks for your help.
>
> >
>
> > I am to build base tools and able to generate bin files.
>
> >
>
> > "Build" command is generated.
>
> >
>
> > Later, I am trying to build "EmulatorPkg".
>
> >
>
> > And running into VfrCompile error.
>
> >
>
> > 'VfrCompile' is not recognized as an internal or external command,
>
> >
>
> > operable program or batch file.
>
> >
>
> > NMAKE : fatal error U1077: '"VfrCompile' : return code '0x1'
>
> >
>
> > Stop.
>
> >
>
> > 'VfrCompile' is not recognized as an internal or external command,
>
> >
>
> > operable program or batch file.
>
> >
>
> > I can see VfrCompile.exe generated in "BaseTools".
>
> >
>
> > Attached build log for "Emulator Pkg".
>
> >
>
> > I tried checking the Env Paths .
>
> >
>
> > Regards,
>
> >
>
> > Navdeep
>
> >
>
> > *From:* Sean Brogan
> > <sean.bro...@microsoft.com<mailto:sean.bro...@microsoft.com>>
>
> > *Sent:* Friday, April 24, 2020 12:33 AM
>
> > *To:* devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Singh, Navdeeppal;
> > Bret Barkelew;
>
> > jim.slaugh...@sage-micro.com<mailto:jim.slaugh...@sage-micro.com>
>
> > *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
> >
>
> > [EXTERNAL EMAIL]
>
> >
>
> > Navdeep,
>
> >
>
> > Yes since the 202002 stable tag there have been submodules introduced
>
> > to the basetools. If you look closely you will see in the CI process
>
> > this required a change where stuart_setup is run before calling
>
> > edk2toolsbuild.py.
>
> >
>
> > https://github.com/tianocore/edk2/commit/e1fbff3ded87704fb0086f9b5fb36
>
> > 8080eb4db51#diff-6973939bf9ad6f6a3082d99ce3b32ff1
>
> >
>
> > If you are using "stuart" to build then that is the suggested path as
>
> > stuar_setup will init your submodules listed in the RequiredSubmodules
>
> > (https://github.com/tianocore/edk2/blob/master/.pytool/CISettings.py#L136).
>
> > Given that the edk2 project and ecosystem has numerous ways to setup
>
> > your environment and build, you can also just make sure your workspace
>
> > is complete prior to running Edk2ToolsBuild.py. In this case you only
>
> > need to run "git submodule update --init"
>
> >
>
> > I just did this and it works fine with VS2019.
>
> >
>
> > Jim,
>
> >
>
> > Just as fyi as I know there are lots of reasons for toolchain selection.
>
> >
>
> > I believe the Visual studio build tools are available free of charge
>
> > (not the IDE but the compilers). Directions here.
>
> > https://microsoft.github.io/mu/CodeDevelopment/prerequisites/#visual-s
>
> > tudio-2019-preferred
>
> >
>
> > Thanks
>
> >
>
> > Sean
>
> >
>
> > *From:* devel@edk2.groups.io<mailto:devel@edk2.groups.io>
> > <mailto:devel@edk2.groups.io>
>
> > <devel@edk2.groups.io
> > <mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%20%3cmailto:devel@edk2.groups.io>>>
> > *On Behalf Of
>
> > *Navdeeppal.Singh via groups.io
>
> > *Sent:* Thursday, April 23, 2020 9:14 AM
>
> > *To:* Bret Barkelew <bret.barke...@microsoft.com
>
> > <mailto:bret.barke...@microsoft.com>>;
> > devel@edk2.groups.io<mailto:devel@edk2.groups.io>
>
> > <mailto:devel@edk2.groups.io>
>
> > *Subject:* Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
> >
>
> > Hi Bret,
>
> >
>
> > Yes PIP requirements are up to date.
>
> >
>
> > On further digging through the logging file BASETOOLS_BUILD.txt.
>
> >
>
> > INFO - subprocess not exit successfully
>
> >
>
> > INFO - Error while execute command 'nmake all' in direcotry
>
> > C:\edk2\BaseTools\Source\C\BrotliCompress
>
> >
>
> > Regards,
>
> >
>
> > Navdeep
>
> >
>
> > *From:* Bret Barkelew <bret.barke...@microsoft.com
>
> > <mailto:bret.barke...@microsoft.com>>
>
> > *Sent:* Thursday, April 23, 2020 9:37 PM
>
> > *To:* devel@edk2.groups.io<mailto:devel@edk2.groups.io>
> > <mailto:devel@edk2.groups.io>; Singh,
>
> > Navdeeppal
>
> > *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
> >
>
> > [EXTERNAL EMAIL]
>
> >
>
> > Have you installed the up-to-date Python requirements? "pip install
>
> > -upgrade -r pip-requirements.txt"?
>
> >
>
> > That's the first thing I would check. Otherwise, happy to look at the
>
> > problem with you.
>
> >
>
> > - Bret
>
> >
>
> > *From: *NAVDEEPPAL_SINGH via groups.io
>
> > <mailto:NAVDEEPPAL_SINGH=dell....@groups.io>
>
> > *Sent: *Thursday, April 23, 2020 6:05 AM
>
> > *To: *devel@edk2.groups.io<mailto:*devel@edk2.groups.io>
> > <mailto:devel@edk2.groups.io>
>
> > *Subject: *[EXTERNAL] [edk2-devel] EDK2 environment setup
>
> >
>
> > I am trying to setup EDK2 environment setup from Tianocore/EDK2.
>
> > While doing the Base Tool setup. After running
>
> > BaseTool/EDK2ToolsBuild.py -t VS2019 Getting following error :-
>
> > c:\edk2\BaseTools>python Edk2ToolsBuild.py -t VS2019 SECTION - Init
>
> > SDE SECTION - Loading Plugins SECTION - Start Invocable Tool Traceback
>
> > (most recent call last):
>
> > File "Edk2ToolsBuild.py", line 177, in <module>
>
> > main()
>
> > File "Edk2ToolsBuild.py", line 173, in main
>
> > Edk2ToolsBuild().Invoke()
>
> > File "C:\Program
>
> > Files\Python38\lib\site-packages\edk2toolext\base_abstract_invocable.p
>
> > y", line 141, in Invoke
>
> > retcode = self.Go()
>
> > File "Edk2ToolsBuild.py", line 139, in Go
>
> > raise Exception("Failed to build.")
>
> > Exception: Failed to build.
>
> >
>
> > set EDK_TOOLS_PATH=C:\edk2\BaseTools
>
> > set EDK_TOOLS_BIN=C:\edk2\BaseTools\Bin\Win32
>
> > Can some one help
>
> >
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#58221): https://edk2.groups.io/g/devel/message/58221
Mute This Topic: https://groups.io/mt/73323736/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
