Are you using edksetup.bat? I would have expected this code to set the
path for you.
https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat#L134
So without more logs i don't know.
If you want to use "stuart" (my preferred method) I have a commit here
for EmulatorPkg which has a platformbuild.py and readme.md that
describes the process. This should be committed to edk2 master this
week to enable Platform CI for every PR.
Here is the readme and details.
https://github.com/spbrogan/edk2/tree/PlatformAndCoreCIForOvmfArmVirtEmulatorPackages_v10/EmulatorPkg/PlatformCI
Here is the commit you should cherry-pick if you want to try it.
https://github.com/spbrogan/edk2/commit/8bdb9075b52a9d1c196b068729eefd76f068d0a2
Thanks
Sean
On 4/27/2020 1:26 AM, navdeeppal.si...@dell.com wrote:
Hi,
Thanks for your help.
I am to build base tools and able to generate bin files.
“Build” command is generated.
Later, I am trying to build “EmulatorPkg”.
And running into VfrCompile error.
'VfrCompile' is not recognized as an internal or external command,
operable program or batch file.
NMAKE : fatal error U1077: '"VfrCompile' : return code '0x1'
Stop.
'VfrCompile' is not recognized as an internal or external command,
operable program or batch file.
I can see VfrCompile.exe generated in “BaseTools”.
Attached build log for “Emulator Pkg”.
I tried checking the Env Paths .
Regards,
Navdeep
*From:* Sean Brogan <sean.bro...@microsoft.com>
*Sent:* Friday, April 24, 2020 12:33 AM
*To:* devel@edk2.groups.io; Singh, Navdeeppal; Bret Barkelew;
jim.slaugh...@sage-micro.com
*Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
[EXTERNAL EMAIL]
Navdeep,
Yes since the 202002 stable tag there have been submodules introduced to
the basetools. If you look closely you will see in the CI process this
required a change where stuart_setup is run before calling
edk2toolsbuild.py.
https://github.com/tianocore/edk2/commit/e1fbff3ded87704fb0086f9b5fb368080eb4db51#diff-6973939bf9ad6f6a3082d99ce3b32ff1
If you are using “stuart” to build then that is the suggested path as
stuar_setup will init your submodules listed in the RequiredSubmodules
(https://github.com/tianocore/edk2/blob/master/.pytool/CISettings.py#L136).
Given that the edk2 project and ecosystem has numerous ways to setup
your environment and build, you can also just make sure your workspace
is complete prior to running Edk2ToolsBuild.py. In this case you only
need to run “git submodule update --init”
I just did this and it works fine with VS2019.
Jim,
Just as fyi as I know there are lots of reasons for toolchain selection.
I believe the Visual studio build tools are available free of charge
(not the IDE but the compilers). Directions here.
https://microsoft.github.io/mu/CodeDevelopment/prerequisites/#visual-studio-2019-preferred
Thanks
Sean
*From:* devel@edk2.groups.io <mailto:devel@edk2.groups.io>
<devel@edk2.groups.io <mailto:devel@edk2.groups.io>> *On Behalf Of
*Navdeeppal.Singh via groups.io
*Sent:* Thursday, April 23, 2020 9:14 AM
*To:* Bret Barkelew <bret.barke...@microsoft.com
<mailto:bret.barke...@microsoft.com>>; devel@edk2.groups.io
<mailto:devel@edk2.groups.io>
*Subject:* Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
Hi Bret,
Yes PIP requirements are up to date.
On further digging through the logging file BASETOOLS_BUILD.txt.
INFO - subprocess not exit successfully
INFO - Error while execute command 'nmake all' in direcotry
C:\edk2\BaseTools\Source\C\BrotliCompress
Regards,
Navdeep
*From:* Bret Barkelew <bret.barke...@microsoft.com
<mailto:bret.barke...@microsoft.com>>
*Sent:* Thursday, April 23, 2020 9:37 PM
*To:* devel@edk2.groups.io <mailto:devel@edk2.groups.io>; Singh, Navdeeppal
*Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
[EXTERNAL EMAIL]
Have you installed the up-to-date Python requirements? “pip install
–upgrade -r pip-requirements.txt”?
That’s the first thing I would check. Otherwise, happy to look at the
problem with you.
- Bret
*From: *NAVDEEPPAL_SINGH via groups.io
<mailto:NAVDEEPPAL_SINGH=dell....@groups.io>
*Sent: *Thursday, April 23, 2020 6:05 AM
*To: *devel@edk2.groups.io <mailto:devel@edk2.groups.io>
*Subject: *[EXTERNAL] [edk2-devel] EDK2 environment setup
I am trying to setup EDK2 environment setup from Tianocore/EDK2.
While doing the Base Tool setup. After running
BaseTool/EDK2ToolsBuild.py -t VS2019
Getting following error :-
c:\edk2\BaseTools>python Edk2ToolsBuild.py -t VS2019
SECTION - Init SDE
SECTION - Loading Plugins
SECTION - Start Invocable Tool
Traceback (most recent call last):
File "Edk2ToolsBuild.py", line 177, in <module>
main()
File "Edk2ToolsBuild.py", line 173, in main
Edk2ToolsBuild().Invoke()
File "C:\Program
Files\Python38\lib\site-packages\edk2toolext\base_abstract_invocable.py", line
141, in Invoke
retcode = self.Go()
File "Edk2ToolsBuild.py", line 139, in Go
raise Exception("Failed to build.")
Exception: Failed to build.
set EDK_TOOLS_PATH=C:\edk2\BaseTools
set EDK_TOOLS_BIN=C:\edk2\BaseTools\Bin\Win32
Can some one help
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#58191): https://edk2.groups.io/g/devel/message/58191
Mute This Topic: https://groups.io/mt/73221341/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
