Hi Jiang,
It is not a question of effort of copying a driver, it is a question
that copying drivers is something that should be avoided wherever
practically possible. I did not think this topic was still under
debate.
If the existing 16550 SerialPortLib is overspecialised to the point
where it only works on a subset of 16550 implementations, then it
should change. There are going to be more non-PC systems turning up
with 16550 UARTs - should they each copy/modify their drivers?
If there are better ways of solving that problem, please suggest.
But more duplicated drivers is not the answer.
/
Leif
On Mon, Mar 30, 2020 at 01:20:03 +0000, Jiang, Guomin wrote:
> Hi Pankaj,
>
> I know your consideration.
>
> My consideration is that we provide an interface, it should be
> better for user, it not, the user won't use it and if no nobody use
> it, why provide it?
> In other word, the effort for copying the SerialPortLib and the
> effort for implementing SerialUartClockLib are same, why consumer
> should learn the new interface?
>
> Thanks.
> > -----Original Message-----
> > From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> > Pankaj Bansal
> > Sent: Saturday, March 28, 2020 8:37 PM
> > To: Jiang, Guomin <guomin.ji...@intel.com>; devel@edk2.groups.io; Pankaj
> > Bansal <pankaj.ban...@nxp.com>; Leif Lindholm <l...@nuviainc.com>; Ni,
> > Ray <ray...@intel.com>; Ard Biesheuvel <ard.biesheu...@linaro.org>
> > Cc: Wang, Jian J <jian.j.w...@intel.com>; Wu, Hao A
> > <hao.a...@intel.com>; Ma, Maurice <maurice...@intel.com>; Dong, Guo
> > <guo.d...@intel.com>; You, Benjamin <benjamin....@intel.com>;
> > Meenakshi Aggarwal <meenakshi.aggar...@nxp.com>; Varun Sethi
> > <v.se...@nxp.com>; Samer El-Haj-Mahmoud <Samer.El-Haj-
> > mahm...@arm.com>
> > Subject: Re: [edk2-devel] [PATCH 1/1] MdeModulePkg: UART Dynamic clock
> > freq Support
> >
> > Hello Jiang,
> >
> > > -----Original Message-----
> > > From: Jiang, Guomin <guomin.ji...@intel.com>
> > > Sent: Thursday, March 26, 2020 7:44 PM
> > > To: devel@edk2.groups.io; Pankaj Bansal <pankaj.ban...@nxp.com>; Leif
> > > Lindholm <l...@nuviainc.com>; Ni, Ray <ray...@intel.com>
> > > Cc: Pankaj Bansal (OSS) <pankaj.ban...@oss.nxp.com>; Wang, Jian J
> > > <jian.j.w...@intel.com>; Wu, Hao A <hao.a...@intel.com>; Ma, Maurice
> > > <maurice...@intel.com>; Dong, Guo <guo.d...@intel.com>; You,
> > Benjamin
> > > <benjamin....@intel.com>; Meenakshi Aggarwal
> > > <meenakshi.aggar...@nxp.com>; Varun Sethi <v.se...@nxp.com>
> > > Subject: RE: [edk2-devel] [PATCH 1/1] MdeModulePkg: UART Dynamic
> > clock
> > > freq Support
> > >
> > > It is a good idea,
> > >
> > > I have a question:
> > > 1. When can detect the jumper signal or register?
> > -> This depends on platform. Ideally as early as possible in boot
> > process (in SEC phase), because PEI Core and onwards, all modules start
> > making call to DebugLib constructor.
> > > 2. If the jumper use GPIO, SerialUartClockLib will depend on GpioLib?
> > -> Yes, SerialUartClockLib can depend on other libraries as well. E.g.
> > in
> > https://edk2.groups.io/g/devel/message/56009, SerialUartClockLib depends
> > on ArmPlatformLib
> > > 3. If the register is inside SIO, how to dispose the dependence?
> > -> I did not understand term SIO. Quick google search throws up Intel
> > Serial IO host controller driver. Intel Serial IO driver is required if you
> > plan to
> > use the I2C, UART, or GPIO host controllers.
> > Is that what you are referring to ? I assume you mean that what
> > happens if the SerialUartClockLib, tries to read registers that require
> > SerialPortLib ? i.e. circular dependency i.e deadlock ?
> > In that case, some kind of intervention is required on Platform
> > owner part. May be implement a version of SerialUartClockLib for SEC phase
> > that doesn't depend on SerialPortLib, which lets
> > the serial port to initialize. For all other module types, implement
> > another version of SerialUartClockLib.
> > >
> > > If it is too complex to implement the SerialUartClockLib, the project
> > > owner will choose use BaseSerialUartClockLib rather implement it. and
> > > in this case, it make no sense after import complexity.
> >
> > Complexity is platform specific. We have implemented
> > BaseSerialUartClockLib in https://edk2.groups.io/g/devel/message/56009.
> >
> > >
> > > I have also reviewed the ArmPlatformPkg/Library/PL011UartClockLib
> > > code, it still use the fixed data rather than dynamically detect clock.
> >
> > Right. As I said, making PcdSerialClockRate as Dynamic PCD, we cannot use
> > this in modules for which PcdLib is BasePcdLibNull.
> > It results in ASSERT.
> >
> > >
> > > > -----Original Message-----
> > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > > > Pankaj Bansal
> > > > Sent: Monday, March 23, 2020 1:31 PM
> > > > To: Leif Lindholm <l...@nuviainc.com>; Ni, Ray <ray...@intel.com>
> > > > Cc: Pankaj Bansal (OSS) <pankaj.ban...@oss.nxp.com>; Wang, Jian J
> > > > <jian.j.w...@intel.com>; Wu, Hao A <hao.a...@intel.com>; Ma,
> > Maurice
> > > > <maurice...@intel.com>; Dong, Guo <guo.d...@intel.com>; You,
> > > > Benjamin <benjamin....@intel.com>; Meenakshi Aggarwal
> > > > <meenakshi.aggar...@nxp.com>; Varun Sethi <v.se...@nxp.com>;
> > > > devel@edk2.groups.io
> > > > Subject: Re: [edk2-devel] [PATCH 1/1] MdeModulePkg: UART Dynamic
> > > > clock freq Support
> > > >
> > > > Hi Ray,
> > > >
> > > > I had thought of making PcdSerialClockRate as Dynamic PCD I had made
> > > > changes for it too.
> > > > But it doesn't work.
> > > > SerialPortInitalize, which uses PcdSerialClockRate, gets called from
> > > > DebugLib constructor.
> > > > DebugLib is used by every module to print any info onto console.
> > > > For DxeCore and PcdDxe, for which PcdLib instance is NULL, this
> > > > results in Assert :
> > > >
> > > >
> > https://github.com/tianocore/edk2/blob/master/MdePkg/Library/BasePcd
> > > > Li
> > > > bNull/PcdLib.c#L123
> > > >
> > > > The other approach that I thought of was, to copy
> > > > BaseSerialPortLib16550 for our platform and simply return EFI_SUCCESS
> > from SerialPortInitalize.
> > > > But as Leif pointed out, this results in code duplication.
> > > >
> > > > Regards,
> > > > Pankaj Bansal
> > > >
> > > > > -----Original Message-----
> > > > > From: Leif Lindholm <l...@nuviainc.com>
> > > > > Sent: Thursday, March 19, 2020 9:01 PM
> > > > > To: Ni, Ray <ray...@intel.com>
> > > > > Cc: Pankaj Bansal (OSS) <pankaj.ban...@oss.nxp.com>; Wang, Jian J
> > > > > <jian.j.w...@intel.com>; Wu, Hao A <hao.a...@intel.com>; Ma,
> > > > > Maurice <maurice...@intel.com>; Dong, Guo <guo.d...@intel.com>;
> > > > > You,
> > > > Benjamin
> > > > > <benjamin....@intel.com>; Meenakshi Aggarwal
> > > > > <meenakshi.aggar...@nxp.com>; Varun Sethi <v.se...@nxp.com>;
> > > > > devel@edk2.groups.io; Pankaj Bansal <pankaj.ban...@nxp.com>
> > > > > Subject: Re: [PATCH 1/1] MdeModulePkg: UART Dynamic clock freq
> > > > Support
> > > > >
> > > > > Hi Ray,
> > > > >
> > > > > I agree it would be nice, but if not - this lets us get rid of
> > > > > otherwise needless driver duplication. To me, that makes it worth
> > > > > a little trivial churn.
> > > > >
> > > > > /
> > > > > Leif
> > > > >
> > > > > On Thu, Mar 19, 2020 at 15:09:19 +0000, Ni, Ray wrote:
> > > > > > It seems this change requires all platforms DSC to include the
> > > > > > new library
> > > > > class/instance.
> > > > > >
> > > > > > Is there a way that can avoid the platform impact?
> > > > > >
> > > > > > Thanks,
> > > > > > Ray
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Pankaj Bansal <pankaj.ban...@oss.nxp.com>
> > > > > > > Sent: Wednesday, February 19, 2020 9:32 PM
> > > > > > > To: Wang, Jian J <jian.j.w...@intel.com>; Wu, Hao A
> > > > > <hao.a...@intel.com>; Ni, Ray <ray...@intel.com>; Ma, Maurice
> > > > > > > <maurice...@intel.com>; Dong, Guo <guo.d...@intel.com>; You,
> > > > > Benjamin <benjamin....@intel.com>; Leif Lindholm
> > > > > > > <l...@nuviainc.com>; Meenakshi Aggarwal
> > > > > <meenakshi.aggar...@nxp.com>; Varun Sethi <v.se...@nxp.com>
> > > > > > > Cc: devel@edk2.groups.io; Pankaj Bansal
> > > > > > > <pankaj.ban...@nxp.com>
> > > > > > > Subject: [PATCH 1/1] MdeModulePkg: UART Dynamic clock freq
> > > > Support
> > > > > > >
> > > > > > > From: Pankaj Bansal <pankaj.ban...@nxp.com>
> > > > > > >
> > > > > > > Some platform support dynamic clocking, which is controlled by
> > > > > > > some jumper setting or hardware registers. Result of that is
> > > > > > > that PCD PcdSerialClockRate would need to be updated for
> > > > > > > frequency
> > > > change.
> > > > > > >
> > > > > > > This patch implements support for dynamic frequency for Uart.
> > > > > > >
> > > > > > > This patch implements default lib, which is using Pcd.
> > > > > > > Platform which needs dynamic clocking needs implement
> > > > > > > SerialUartClockLib
> > > > > > >
> > > > > > > This patch is based on
> > > > > > > ArmPlatformPkg/Library/PL011UartClockLib
> > > > > > >
> > > > > > > Signed-off-by: Pankaj Bansal <pankaj.ban...@nxp.com>
> > > > > > > ---
> > > > > > > .../Include/Library/SerialUartClockLib.h | 21
> > > > > > > +++++++++++++++
> > > > > > > .../BaseSerialPortLib16550.c | 9 ++++---
> > > > > > > .../BaseSerialPortLib16550.inf | 2 +-
> > > > > > > .../BaseSerialUartClockLib.c | 24
> > > > > > > +++++++++++++++++
> > > > > > > .../BaseSerialUartClockLib.inf | 27
> > > > > > > +++++++++++++++++++
> > > > > > > MdeModulePkg/MdeModulePkg.dsc | 2 ++
> > > > > > > SourceLevelDebugPkg/SourceLevelDebugPkg.dsc | 1 +
> > > > > > > UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 1 +
> > > > > > > UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 1 +
> > > > > > > 9 files changed, 83 insertions(+), 5 deletions(-) create
> > > > > > > mode
> > > > > > > 100644 MdeModulePkg/Include/Library/SerialUartClockLib.h
> > > > > > > create mode 100644
> > > > > MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartClockLib
> > > > > .c
> > > > > > > create mode 100644
> > > > > MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartClockLib
> > > > > .inf
> > > > > > >
> > > > > > > diff --git a/MdeModulePkg/Include/Library/SerialUartClockLib.h
> > > > > b/MdeModulePkg/Include/Library/SerialUartClockLib.h
> > > > > > > new file mode 100644
> > > > > > > index 000000000000..b6b16f71d4cf
> > > > > > > --- /dev/null
> > > > > > > +++ b/MdeModulePkg/Include/Library/SerialUartClockLib.h
> > > > > > > @@ -0,0 +1,21 @@
> > > > > > > +/** @file
> > > > > > > +*
> > > > > > > +* Copyright 2020 NXP
> > > > > > > +*
> > > > > > > +* SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > > > > +*
> > > > > > > +**/
> > > > > > > +
> > > > > > > +#ifndef SERIAL_UART_CLOCK_LIB_H__ #define
> > > > > > > +SERIAL_UART_CLOCK_LIB_H__
> > > > > > > +
> > > > > > > +/**
> > > > > > > + Return clock in for Uart IP **/
> > > > > > > +UINT32
> > > > > > > +EFIAPI
> > > > > > > +BaseSerialPortGetClock (
> > > > > > > + VOID
> > > > > > > + );
> > > > > > > +
> > > > > > > +#endif
> > > > > > > diff --git
> > > > >
> > > >
> > a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550
> > > > .c
> > > > > > >
> > > > b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib165
> > > > > > > 50.c index 9cb50dd80d56..2e0c05d5789e 100644
> > > > > > > ---
> > > > >
> > > >
> > a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550
> > > > .c
> > > > > > > +++
> > > > >
> > > >
> > b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550
> > > > .c
> > > > > > > @@ -16,6 +16,7 @@
> > > > > > > #include <Library/IoLib.h>
> > > > > > > #include <Library/PciLib.h>
> > > > > > > #include <Library/PlatformHookLib.h>
> > > > > > > +#include <Library/SerialUartClockLib.h>
> > > > > > > #include <Library/BaseLib.h>
> > > > > > >
> > > > > > > //
> > > > > > > @@ -501,8 +502,8 @@ SerialPortInitialize (
> > > > > > > // Calculate divisor for baud generator
> > > > > > > // Ref_Clk_Rate / Baud_Rate / 16
> > > > > > > //
> > > > > > > - Divisor = PcdGet32 (PcdSerialClockRate) / (PcdGet32
> > > > > > > (PcdSerialBaudRate) *
> > > > > 16);
> > > > > > > - if ((PcdGet32 (PcdSerialClockRate) % (PcdGet32
> > > > > > > (PcdSerialBaudRate) *
> > > > > 16)) >= PcdGet32 (PcdSerialBaudRate) * 8) {
> > > > > > > + Divisor = BaseSerialPortGetClock () / (PcdGet32
> > > > > > > + (PcdSerialBaudRate) * 16); if ((BaseSerialPortGetClock () %
> > > > > > > + (PcdGet32 (PcdSerialBaudRate) * 16)) >=
> > > > > PcdGet32 (PcdSerialBaudRate) * 8) {
> > > > > > > Divisor++;
> > > > > > > }
> > > > > > >
> > > > > > > @@ -1080,8 +1081,8 @@ SerialPortSetAttributes (
> > > > > > > // Calculate divisor for baud generator
> > > > > > > // Ref_Clk_Rate / Baud_Rate / 16
> > > > > > > //
> > > > > > > - Divisor = PcdGet32 (PcdSerialClockRate) / (SerialBaudRate *
> > > > > > > 16);
> > > > > > > - if ((PcdGet32 (PcdSerialClockRate) % (SerialBaudRate * 16))
> > > > > > > >=
> > > > > SerialBaudRate * 8) {
> > > > > > > + Divisor = BaseSerialPortGetClock () / (SerialBaudRate *
> > > > > > > + 16); if ((BaseSerialPortGetClock () % (SerialBaudRate * 16))
> > > > > > > + >= SerialBaudRate *
> > > > > 8) {
> > > > > > > Divisor++;
> > > > > > > }
> > > > > > >
> > > > > > > diff --git
> > > > > a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib165
> > > > > 50.i
> > > > > nf
> > > > > > >
> > > > >
> > b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib165
> > > > > 50.i
> > > > > nf
> > > > > > > index 8b4ae3f1d4ee..b4c16504f211 100644
> > > > > > > ---
> > > > > a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib165
> > > > > 50.i
> > > > > nf
> > > > > > > +++
> > > > >
> > b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib165
> > > > > 50.i
> > > > > nf
> > > > > > > @@ -24,6 +24,7 @@ [LibraryClasses]
> > > > > > > IoLib
> > > > > > > PlatformHookLib
> > > > > > > PciLib
> > > > > > > + SerialUartClockLib
> > > > > > >
> > > > > > > [Sources]
> > > > > > > BaseSerialPortLib16550.c
> > > > > > > @@ -37,7 +38,6 @@ [Pcd]
> > > > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate
> > > > > > > ##
> > > > > CONSUMES
> > > > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl
> > ##
> > > > > CONSUMES
> > > > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl
> > > > > > > ##
> > > > > CONSUMES
> > > > > > > - gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate
> > > > > > > ##
> > > > > CONSUMES
> > > > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo
> > ##
> > > > > CONSUMES
> > > > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize
> > > > ##
> > > > > CONSUMES
> > > > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride
> > ##
> > > > > CONSUMES
> > > > > > > diff --git
> > > > > a/MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartClockL
> > > > > ib.c
> > > > > > > b/MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartCl
> > > > > > > ockL
> > > > > > > ib.c
> > > > > > > new file mode 100644
> > > > > > > index 000000000000..7a0d0427cc4e
> > > > > > > --- /dev/null
> > > > > > > +++
> > > > > b/MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartClockL
> > > > > ib.c
> > > > > > > @@ -0,0 +1,24 @@
> > > > > > > +/** @file
> > > > > > > +*
> > > > > > > +* Copyright 2020 NXP
> > > > > > > +*
> > > > > > > +* SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > > > > +*
> > > > > > > +**/
> > > > > > > +
> > > > > > > +#include <Base.h>
> > > > > > > +#include <Library/PcdLib.h>
> > > > > > > +
> > > > > > > +/**
> > > > > > > + Return clock in for Uart IP
> > > > > > > +
> > > > > > > + @return Pcd PcdSerialClockRate **/
> > > > > > > +UINT32
> > > > > > > +EFIAPI
> > > > > > > +BaseSerialPortGetClock (
> > > > > > > + VOID
> > > > > > > + )
> > > > > > > +{
> > > > > > > + return PcdGet32 (PcdSerialClockRate); }
> > > > > > > diff --git
> > > > > a/MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartClockL
> > > > > ib.i
> > > > > nf
> > > > > > >
> > > > > b/MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartClockL
> > > > > ib.i
> > > > > nf
> > > > > > > new file mode 100644
> > > > > > > index 000000000000..91ba69436ed6
> > > > > > > --- /dev/null
> > > > > > > +++
> > > > > b/MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartClockL
> > > > > ib.i
> > > > > nf
> > > > > > > @@ -0,0 +1,27 @@
> > > > > > > +#/* @file
> > > > > > > +# Copyright 2020 NXP
> > > > > > > +#
> > > > > > > +# SPDX-License-Identifier: BSD-2-Clause-Patent # #*/
> > > > > > > +
> > > > > > > +[Defines]
> > > > > > > + INF_VERSION = 0x0001001A
> > > > > > > + BASE_NAME = BaseSerialUartClockLib
> > > > > > > + FILE_GUID =
> > > > > > > fa65495e-d3c8-4ea3-9737-994e9ccbaf11
> > > > > > > + MODULE_TYPE = BASE
> > > > > > > + VERSION_STRING = 1.0
> > > > > > > + LIBRARY_CLASS = SerialUartClockLib
> > > > > > > +
> > > > > > > +[Packages]
> > > > > > > + MdePkg/MdePkg.dec
> > > > > > > + MdeModulePkg/MdeModulePkg.dec
> > > > > > > +
> > > > > > > +[Sources.common]
> > > > > > > + BaseSerialUartClockLib.c
> > > > > > > +
> > > > > > > +[LibraryClasses]
> > > > > > > + PcdLib
> > > > > > > +
> > > > > > > +[Pcd]
> > > > > > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate
> > ##
> > > > > CONSUMES
> > > > > > > diff --git a/MdeModulePkg/MdeModulePkg.dsc
> > > > > b/MdeModulePkg/MdeModulePkg.dsc
> > > > > > > index f7dbb27ce25d..d581ca797b3b 100644
> > > > > > > --- a/MdeModulePkg/MdeModulePkg.dsc
> > > > > > > +++ b/MdeModulePkg/MdeModulePkg.dsc
> > > > > > > @@ -65,6 +65,7 @@ [LibraryClasses]
> > > > > > > UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
> > > > > > >
> > > > >
> > > >
> > SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementL
> > > > ib/D
> > > > > xeSecurityManagementLib.inf
> > > > > > >
> > > > >
> > > >
> > TimerLib|MdePkg/Library/BaseTimerLibNullTemplate/BaseTimerLibNullTem
> > > > pl
> > > > > TimerLib|at
> > > > > e.inf
> > > > > > > +
> > > > >
> > > > SerialUartClockLib|MdeModulePkg/Library/BaseSerialUartClockLib/BaseS
> > > > SerialUartClockLib|er
> > > > > SerialUartClockLib|ialU
> > > > > artClockLib.inf
> > > > > > >
> > > > > SerialPortLib|MdePkg/Library/BaseSerialPortLibNull/BaseSerialPortL
> > > > > SerialPortLib|ibNu
> > > > > SerialPortLib|ll.inf
> > > > > > >
> > > > >
> > > >
> > CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.
> > > > CapsuleLib|i
> > > > n
> > > > > CapsuleLib|f
> > > > > > > PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> > > > > > > @@ -292,6 +293,7 @@ [Components]
> > > > > > >
> > > > >
> > > >
> > MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.
> > > > inf
> > > > > > >
> > > > >
> > > >
> > MdeModulePkg/Library/RuntimeDxeReportStatusCodeLib/RuntimeDxeRep
> > > > ortSt
> > > > > atusCodeLib.inf
> > > > > > >
> > > > >
> > > >
> > MdeModulePkg/Library/RuntimeResetSystemLib/RuntimeResetSystemLib.i
> > > > nf
> > > > > > > +
> > > > > MdeModulePkg/Library/BaseSerialUartClockLib/BaseSerialUartClockLib
> > > > > .inf
> > > > > > >
> > > > >
> > MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550
> > > > > .inf
> > > > > > >
> > > > >
> > > >
> > MdeModulePkg/Library/BasePlatformHookLibNull/BasePlatformHookLibNull
> > > > .i
> > > > > nf
> > > > > > >
> > > > >
> > > >
> > MdeModulePkg/Library/DxeDebugPrintErrorLevelLib/DxeDebugPrintErrorLe
> > > > ve
> > > > > lLi
> > > > > b.inf
> > > > > > > diff --git a/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc
> > > > > b/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc
> > > > > > > index a1a1b81d03cb..c0ad88f26341 100644
> > > > > > > --- a/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc
> > > > > > > +++ b/SourceLevelDebugPkg/SourceLevelDebugPkg.dsc
> > > > > > > @@ -33,6 +33,7 @@ [LibraryClasses.common]
> > > > > > >
> > > > >
> > > >
> > SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchro
> > > > SynchronizationLib|ni
> > > > > SynchronizationLib|zati
> > > > > onLib.inf
> > > > > > >
> > > > > > > LocalApicLib|UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.inf
> > > > > > >
> > > > >
> > > >
> > PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/Bas
> > > > PeCoffGetEntryPointLib|e
> > > > P
> > > > > PeCoffGetEntryPointLib|eC
> > > > > offGetEntryPointLib.inf
> > > > > > > +
> > > > >
> > > > SerialUartClockLib|MdeModulePkg/Library/BaseSerialUartClockLib/BaseS
> > > > SerialUartClockLib|er
> > > > > SerialUartClockLib|ialU
> > > > > artClockLib.inf
> > > > > > >
> > > > > SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSeri
> > > > > SerialPortLib|alPo
> > > > > SerialPortLib|rtLib
> > > > > 16550.inf
> > > > > > >
> > > > >
> > > > PeCoffExtraActionLib|SourceLevelDebugPkg/Library/PeCoffExtraActionLi
> > > > PeCoffExtraActionLib|bD
> > > > > PeCoffExtraActionLib|ebu
> > > > > g/PeCoffExtraActionLibDebug.inf
> > > > > > >
> > > > >
> > > >
> > TimerLib|UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/SecPeiDxeTimerL
> > > > TimerLib|i
> > > > b
> > > > > TimerLib|Ue
> > > > > fiCpu.inf
> > > > > > > diff --git a/UefiPayloadPkg/UefiPayloadPkgIa32.dsc
> > > > > b/UefiPayloadPkg/UefiPayloadPkgIa32.dsc
> > > > > > > index d52945442e0e..a556a32b272c 100644
> > > > > > > --- a/UefiPayloadPkg/UefiPayloadPkgIa32.dsc
> > > > > > > +++ b/UefiPayloadPkg/UefiPayloadPkgIa32.dsc
> > > > > > > @@ -174,6 +174,7 @@ [LibraryClasses]
> > > > > > > #
> > > > > > >
> > > > > > > TimerLib|UefiPayloadPkg/Library/AcpiTimerLib/AcpiTimerLib.inf
> > > > > > >
> > > > >
> > > >
> > ResetSystemLib|UefiPayloadPkg/Library/ResetSystemLib/ResetSystemLib.
> > > > ResetSystemLib|in
> > > > > ResetSystemLib|f
> > > > > > > +
> > > > >
> > > > SerialUartClockLib|MdeModulePkg/Library/BaseSerialUartClockLib/BaseS
> > > > SerialUartClockLib|er
> > > > > SerialUartClockLib|ialU
> > > > > artClockLib.inf
> > > > > > >
> > > > > SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSeri
> > > > > SerialPortLib|alPo
> > > > > SerialPortLib|rtLib
> > > > > 16550.inf
> > > > > > >
> > > > >
> > > >
> > PlatformHookLib|UefiPayloadPkg/Library/PlatformHookLib/PlatformHookL
> > > > PlatformHookLib|ib
> > > > > PlatformHookLib|.in
> > > > > f
> > > > > > >
> > > > >
> > > >
> > PlatformBootManagerLib|UefiPayloadPkg/Library/PlatformBootManagerLib
> > > > PlatformBootManagerLib|/
> > > > P
> > > > > PlatformBootManagerLib|l
> > > > > atformBootManagerLib.inf
> > > > > > > diff --git a/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
> > > > > b/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
> > > > > > > index 0736cd995476..7e86375fe57d 100644
> > > > > > > --- a/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
> > > > > > > +++ b/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
> > > > > > > @@ -175,6 +175,7 @@ [LibraryClasses]
> > > > > > > #
> > > > > > >
> > > > > > > TimerLib|UefiPayloadPkg/Library/AcpiTimerLib/AcpiTimerLib.inf
> > > > > > >
> > > > >
> > > >
> > ResetSystemLib|UefiPayloadPkg/Library/ResetSystemLib/ResetSystemLib.
> > > > ResetSystemLib|in
> > > > > ResetSystemLib|f
> > > > > > > +
> > > > >
> > > > SerialUartClockLib|MdeModulePkg/Library/BaseSerialUartClockLib/BaseS
> > > > SerialUartClockLib|er
> > > > > SerialUartClockLib|ialU
> > > > > artClockLib.inf
> > > > > > >
> > > > > SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSeri
> > > > > SerialPortLib|alPo
> > > > > SerialPortLib|rtLib
> > > > > 16550.inf
> > > > > > >
> > > > >
> > > >
> > PlatformHookLib|UefiPayloadPkg/Library/PlatformHookLib/PlatformHookL
> > > > PlatformHookLib|ib
> > > > > PlatformHookLib|.in
> > > > > f
> > > > > > >
> > > > >
> > > >
> > PlatformBootManagerLib|UefiPayloadPkg/Library/PlatformBootManagerLib
> > > > PlatformBootManagerLib|/
> > > > P
> > > > > PlatformBootManagerLib|l
> > > > > atformBootManagerLib.inf
> > > > > > > --
> > > > > > > 2.17.1
> > > > > >
> > > >
> > > >
> >
> >
> >
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#56604): https://edk2.groups.io/g/devel/message/56604
Mute This Topic: https://groups.io/mt/71393886/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
