From: Antoine Coeur <co...@gmx.fr>
Correctly write 'serial', remove duplicated 'the'.
Cc: Ray Ni <ray...@intel.com>
Signed-off-by: Antoine Coeur <co...@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <phi...@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <phi...@redhat.com>
---
PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c | 2 +-
PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
b/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
index 7dc11014a588..0a49093dbf26 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
@@ -59,7 +59,7 @@ AcpiTimerLibConstructor (
//
// If the register offset to the BAR for the ACPI I/O Port Base Address is
0x0000, then
- // no PCI register programming is required to enable access to the the ACPI
registers
+ // no PCI register programming is required to enable access to the ACPI
registers
// specified by PcdAcpiIoPortBaseAddress
//
if (PcdGet16 (PcdAcpiIoPciBarRegisterOffset) == 0x0000) {
diff --git a/PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c
b/PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c
index 25c4cefc1381..aa5657a7fd6b 100644
--- a/PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c
+++ b/PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c
@@ -58,7 +58,7 @@ UINT8 gBreakSet = 0;
If the serial device could not be initialized, then return
RETURN_DEVICE_ERROR.
@retval RETURN_SUCCESS The serial device was initialized.
- @retval RETURN_DEVICE_ERROR The serail device could not be initialized.
+ @retval RETURN_DEVICE_ERROR The serial device could not be initialized.
**/
RETURN_STATUS
@@ -139,7 +139,7 @@ SerialPortWrite (
while ((NumberOfBytes--) != 0) {
//
- // Wait for the serail port to be ready.
+ // Wait for the serial port to be ready.
//
do {
Data = IoRead8 ((UINT16) gUartBase + LSR_OFFSET);
@@ -180,7 +180,7 @@ SerialPortRead (
while ((NumberOfBytes--) != 0) {
//
- // Wait for the serail port to be ready.
+ // Wait for the serial port to be ready.
//
do {
Data = IoRead8 ((UINT16) gUartBase + LSR_OFFSET);
--
2.21.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#52795): https://edk2.groups.io/g/devel/message/52795
Mute This Topic: https://groups.io/mt/69395960/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
