From: Antoine Coeur <co...@gmx.fr>
Fix various typos in comments and documentation.
Cc: Jordan Justen <jordan.l.jus...@intel.com>
Cc: Laszlo Ersek <ler...@redhat.com>
Cc: Ard Biesheuvel <ard.biesheu...@linaro.org>
Cc: Anthony Perard <anthony.per...@citrix.com>
Cc: Julien Grall <jul...@xen.org>
Signed-off-by: Antoine Coeur <co...@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <phi...@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <phi...@redhat.com>
---
OvmfPkg/Include/IndustryStandard/Xen/arch-arm/xen.h | 2 +-
OvmfPkg/Include/IndustryStandard/Xen/grant_table.h | 4 ++--
OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h | 2 +-
OvmfPkg/Include/Protocol/XenBus.h | 4 ++--
OvmfPkg/Include/Protocol/XenIo.h | 2 +-
OvmfPkg/XenBusDxe/DriverBinding.h | 2 +-
OvmfPkg/XenBusDxe/EventChannel.h | 2 +-
OvmfPkg/XenBusDxe/GrantTable.h | 2 +-
OvmfPkg/XenPvBlkDxe/BlockIo.h | 6 +++---
OvmfPkg/XenPvBlkDxe/DriverBinding.h | 2 +-
OvmfPkg/Library/PciHostBridgeLib/XenSupport.c | 4 ++--
.../XenConsoleSerialPortLib/XenConsoleSerialPortLib.c | 6 +++---
OvmfPkg/XenBusDxe/XenBus.c | 2 +-
OvmfPkg/XenBusDxe/XenBusDxe.c | 6 +++---
OvmfPkg/XenBusDxe/XenStore.c | 4 ++--
OvmfPkg/XenPvBlkDxe/BlockFront.c | 2 +-
OvmfPkg/XenPvBlkDxe/BlockIo.c | 8 ++++----
OvmfPkg/XenPvBlkDxe/XenPvBlkDxe.c | 2 +-
18 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/OvmfPkg/Include/IndustryStandard/Xen/arch-arm/xen.h
b/OvmfPkg/Include/IndustryStandard/Xen/arch-arm/xen.h
index a394f8d85a5d..36338d063a9d 100644
--- a/OvmfPkg/Include/IndustryStandard/Xen/arch-arm/xen.h
+++ b/OvmfPkg/Include/IndustryStandard/Xen/arch-arm/xen.h
@@ -96,7 +96,7 @@
* All generic sub-operations
*
* HYPERVISOR_physdev_op
- * No sub-operations are currenty supported
+ * No sub-operations are currently supported
*
* HYPERVISOR_sysctl
* All generic sub-operations, with the exception of:
diff --git a/OvmfPkg/Include/IndustryStandard/Xen/grant_table.h
b/OvmfPkg/Include/IndustryStandard/Xen/grant_table.h
index da8d6c2705f0..54af1dbc383c 100644
--- a/OvmfPkg/Include/IndustryStandard/Xen/grant_table.h
+++ b/OvmfPkg/Include/IndustryStandard/Xen/grant_table.h
@@ -365,7 +365,7 @@ DEFINE_XEN_GUEST_HANDLE(gnttab_unmap_grant_ref_t);
/*
* GNTMAP_contains_pte subflag:
* 0 => This map request contains a host virtual address.
- * 1 => This map request contains the machine addess of the PTE to update.
+ * 1 => This map request contains the machine address of the PTE to update.
*/
#define _GNTMAP_contains_pte (4)
#define GNTMAP_contains_pte (1<<_GNTMAP_contains_pte)
@@ -386,7 +386,7 @@ DEFINE_XEN_GUEST_HANDLE(gnttab_unmap_grant_ref_t);
/* ` enum grant_status { */
#define GNTST_okay (0) /* Normal return. */
#define GNTST_general_error (-1) /* General undefined error. */
-#define GNTST_bad_domain (-2) /* Unrecognsed domain id. */
+#define GNTST_bad_domain (-2) /* Unrecognised domain id. */
#define GNTST_bad_gntref (-3) /* Unrecognised or inappropriate gntref. */
#define GNTST_bad_handle (-4) /* Unrecognised or inappropriate handle. */
#define GNTST_bad_virt_addr (-5) /* Inappropriate virtual address to map. */
diff --git a/OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h
b/OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h
index ff8e77589f92..5939610a9616 100644
--- a/OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h
+++ b/OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h
@@ -270,7 +270,7 @@
* access (even when it should be read-only). If the frontend hits the
* maximum number of allowed persistently mapped grants, it can fallback
* to non persistent mode. This will cause a performance degradation,
- * since the the backend driver will still try to map those grants
+ * since the backend driver will still try to map those grants
* persistently. Since the persistent grants protocol is compatible with
* the previous protocol, a frontend driver can choose to work in
* persistent mode even when the backend doesn't support it.
diff --git a/OvmfPkg/Include/Protocol/XenBus.h
b/OvmfPkg/Include/Protocol/XenBus.h
index 8ff5ca357500..0dac9266280f 100644
--- a/OvmfPkg/Include/Protocol/XenBus.h
+++ b/OvmfPkg/Include/Protocol/XenBus.h
@@ -215,7 +215,7 @@ XENSTORE_STATUS
Grant access to the page Frame to the domain DomainId.
@param This A pointer to XENBUS_PROTOCOL instance.
- @param DomainId ID of the domain to grant acces to.
+ @param DomainId ID of the domain to grant access to.
@param Frame Frame Number of the page to grant access to.
@param ReadOnly Provide read-only or read-write access.
@param RefPtr Reference number of the grant will be written to this
pointer.
@@ -266,7 +266,7 @@ UINT32
Send an event to the remote end of the channel whose local endpoint is Port.
@param This A pointer to the XENBUS_PROTOCOL.
- @param Port Local port to the the event from.
+ @param Port Local port to the event from.
@retval UINT32 The return value from the hypercall, 0 if success.
**/
diff --git a/OvmfPkg/Include/Protocol/XenIo.h b/OvmfPkg/Include/Protocol/XenIo.h
index 6bea0a02bb3e..f4051ca50729 100644
--- a/OvmfPkg/Include/Protocol/XenIo.h
+++ b/OvmfPkg/Include/Protocol/XenIo.h
@@ -1,7 +1,7 @@
/** @file
XenIo protocol to abstract arch specific details
- The Xen implementations for the Intel and ARM archictures differ in the way
+ The Xen implementations for the Intel and ARM architectures differ in the way
the base address of the grant table is communicated to the guest. The former
uses a virtual PCI device, while the latter uses a device tree node.
In order to allow the XenBusDxe UEFI driver to be reused for the non-PCI
diff --git a/OvmfPkg/XenBusDxe/DriverBinding.h
b/OvmfPkg/XenBusDxe/DriverBinding.h
index 9b0eb2064461..43ee8aff02ae 100644
--- a/OvmfPkg/XenBusDxe/DriverBinding.h
+++ b/OvmfPkg/XenBusDxe/DriverBinding.h
@@ -75,7 +75,7 @@ XenBusDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/OvmfPkg/XenBusDxe/EventChannel.h b/OvmfPkg/XenBusDxe/EventChannel.h
index 6e98bbe46367..793571fab6d1 100644
--- a/OvmfPkg/XenBusDxe/EventChannel.h
+++ b/OvmfPkg/XenBusDxe/EventChannel.h
@@ -53,7 +53,7 @@ XenBusEventChannelAllocate (
Send an event to the remote end of the channel whose local endpoint is Port.
@param This A pointer to the XENBUS_PROTOCOL.
- @param Port Local port to the the event from.
+ @param Port Local port to the event from.
@retval UINT32 The return value from the hypercall, 0 if success.
**/
diff --git a/OvmfPkg/XenBusDxe/GrantTable.h b/OvmfPkg/XenBusDxe/GrantTable.h
index 2cc889b6433f..0c1e076337e6 100644
--- a/OvmfPkg/XenBusDxe/GrantTable.h
+++ b/OvmfPkg/XenBusDxe/GrantTable.h
@@ -38,7 +38,7 @@ XenGrantTableDeinit (
Grant access to the page Frame to the domain DomainId.
@param This A pointer to XENBUS_PROTOCOL instance.
- @param DomainId ID of the domain to grant acces to.
+ @param DomainId ID of the domain to grant access to.
@param Frame Frame Number of the page to grant access to.
@param ReadOnly Provide read-only or read-write access.
@param RefPtr Reference number of the grant will be written to this
pointer.
diff --git a/OvmfPkg/XenPvBlkDxe/BlockIo.h b/OvmfPkg/XenPvBlkDxe/BlockIo.h
index 85278c67c02c..1100791183d2 100644
--- a/OvmfPkg/XenPvBlkDxe/BlockIo.h
+++ b/OvmfPkg/XenPvBlkDxe/BlockIo.h
@@ -20,7 +20,7 @@
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -50,7 +50,7 @@ XenPvBlkDxeBlockIoReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -72,7 +72,7 @@ XenPvBlkDxeBlockIoWriteBlocks (
@param This Indicates a pointer to the calling context.
@retval EFI_SUCCESS All outstanding data was written to the device
- @retval EFI_DEVICE_ERROR The device reported an error while writting back
the data
+ @retval EFI_DEVICE_ERROR The device reported an error while writing back
the data
@retval EFI_NO_MEDIA There is no media in the device.
**/
diff --git a/OvmfPkg/XenPvBlkDxe/DriverBinding.h
b/OvmfPkg/XenPvBlkDxe/DriverBinding.h
index 9a4eac4b3ebf..fa2983644ce9 100644
--- a/OvmfPkg/XenPvBlkDxe/DriverBinding.h
+++ b/OvmfPkg/XenPvBlkDxe/DriverBinding.h
@@ -90,7 +90,7 @@ XenPvBlkDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/OvmfPkg/Library/PciHostBridgeLib/XenSupport.c
b/OvmfPkg/Library/PciHostBridgeLib/XenSupport.c
index b41bd6b3002b..e161f14375ca 100644
--- a/OvmfPkg/Library/PciHostBridgeLib/XenSupport.c
+++ b/OvmfPkg/Library/PciHostBridgeLib/XenSupport.c
@@ -280,7 +280,7 @@ ScanForRootBridges (
//
if (Pci.Bridge.SubordinateBus > SubBus) {
//
- // If the suborinate bus number of the PCI-PCI bridge is greater
+ // If the subordinate bus number of the PCI-PCI bridge is greater
// than the PCI root bridge's current subordinate bus number,
// then update the PCI root bridge's subordinate bus number
//
@@ -419,7 +419,7 @@ ScanForRootBridges (
//
// See if the PCI Device is a PCI - ISA or PCI - EISA
- // or ISA_POSITIVIE_DECODE Bridge device
+ // or ISA_POSITIVE_DECODE Bridge device
//
if (Pci.Hdr.ClassCode[2] == PCI_CLASS_BRIDGE) {
if (Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA ||
diff --git a/OvmfPkg/Library/XenConsoleSerialPortLib/XenConsoleSerialPortLib.c
b/OvmfPkg/Library/XenConsoleSerialPortLib/XenConsoleSerialPortLib.c
index eef9302dd5c2..895dfc02f90a 100644
--- a/OvmfPkg/Library/XenConsoleSerialPortLib/XenConsoleSerialPortLib.c
+++ b/OvmfPkg/Library/XenConsoleSerialPortLib/XenConsoleSerialPortLib.c
@@ -247,13 +247,13 @@ SerialPortGetControl (
}
/**
- Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
data bits, and stop bits on a serial device.
@param BaudRate The requested baud rate. A BaudRate value of 0
will use the
device's default interface speed.
On output, the value actually set.
- @param ReveiveFifoDepth The requested depth of the FIFO on the receive
side of the
+ @param ReceiveFifoDepth The requested depth of the FIFO on the receive
side of the
serial interface. A ReceiveFifoDepth value of 0
will use
the device's default FIFO depth.
On output, the value actually set.
@@ -266,7 +266,7 @@ SerialPortGetControl (
DefaultParity will use the device's default parity
value.
On output, the value actually set.
@param DataBits The number of data bits to use on the serial
device. A DataBits
- vaule of 0 will use the device's default data bit
setting.
+ value of 0 will use the device's default data bit
setting.
On output, the value actually set.
@param StopBits The number of stop bits to use on this serial
device. A StopBits
value of DefaultStopBits will use the device's
default number of
diff --git a/OvmfPkg/XenBusDxe/XenBus.c b/OvmfPkg/XenBusDxe/XenBus.c
index 2451e58a5961..a203beaaa7e7 100644
--- a/OvmfPkg/XenBusDxe/XenBus.c
+++ b/OvmfPkg/XenBusDxe/XenBus.c
@@ -1,5 +1,5 @@
/** @file
- XenBus Bus driver implemtation.
+ XenBus Bus driver implementation.
This file implement the necessary to discover and enumerate Xen PV devices
through XenStore.
diff --git a/OvmfPkg/XenBusDxe/XenBusDxe.c b/OvmfPkg/XenBusDxe/XenBusDxe.c
index 634c7b71eb55..c47fad2e80bb 100644
--- a/OvmfPkg/XenBusDxe/XenBusDxe.c
+++ b/OvmfPkg/XenBusDxe/XenBusDxe.c
@@ -1,7 +1,7 @@
/** @file
This driver produces XenBus Protocol instances for each Xen PV devices.
- This XenBus bus driver will first initialize differente services in order to
+ This XenBus bus driver will first initialize different services in order to
enumerate the ParaVirtualized devices available.
Those services are:
@@ -297,8 +297,8 @@ NotifyExitBoot (
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
@retval EFI_UNSUPPORTED Something is missing on the system that
- prevent to start the edvice.
- @retval Others The driver failded to start the device.
+ prevent to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/OvmfPkg/XenBusDxe/XenStore.c b/OvmfPkg/XenBusDxe/XenStore.c
index 34890ae40bb2..41fcb390888c 100644
--- a/OvmfPkg/XenBusDxe/XenStore.c
+++ b/OvmfPkg/XenBusDxe/XenStore.c
@@ -138,7 +138,7 @@ typedef struct {
*/
LIST_ENTRY WatchEvents;
- /** Lock protecting the watch calback list. */
+ /** Lock protecting the watch callback list. */
EFI_LOCK WatchEventsLock;
/**
@@ -761,7 +761,7 @@ XenStoreReadReply (
}
/**
- Send a message with an optionally muti-part body to the XenStore service.
+ Send a message with an optionally multi-part body to the XenStore service.
@param Transaction The transaction to use for this request.
@param RequestType The type of message to send.
diff --git a/OvmfPkg/XenPvBlkDxe/BlockFront.c b/OvmfPkg/XenPvBlkDxe/BlockFront.c
index 8dca4c82f08a..f57f85731568 100644
--- a/OvmfPkg/XenPvBlkDxe/BlockFront.c
+++ b/OvmfPkg/XenPvBlkDxe/BlockFront.c
@@ -27,7 +27,7 @@
@param FromBackend Read frontend or backend value.
@param ValuePtr Where to put the value.
- @retval XENSTORE_STATUS_SUCCESS If succefull, will update ValuePtr.
+ @retval XENSTORE_STATUS_SUCCESS If successful, will update ValuePtr.
@return Any other return value indicate the error,
ValuePtr is not updated in this case.
**/
diff --git a/OvmfPkg/XenPvBlkDxe/BlockIo.c b/OvmfPkg/XenPvBlkDxe/BlockIo.c
index 52cf6fc11708..b3a527e4e303 100644
--- a/OvmfPkg/XenPvBlkDxe/BlockIo.c
+++ b/OvmfPkg/XenPvBlkDxe/BlockIo.c
@@ -52,7 +52,7 @@ EFI_BLOCK_IO_PROTOCOL gXenPvBlkDxeBlockIo = {
/**
Read/Write BufferSize bytes from Lba into Buffer.
- This function is commun to XenPvBlkDxeBlockIoReadBlocks and
+ This function is common to XenPvBlkDxeBlockIoReadBlocks and
XenPvBlkDxeBlockIoWriteBlocks.
@param This Indicates a pointer to the calling context.
@@ -172,7 +172,7 @@ XenPvBlkDxeBlockIoReadWriteBlocks (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -206,7 +206,7 @@ XenPvBlkDxeBlockIoReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -232,7 +232,7 @@ XenPvBlkDxeBlockIoWriteBlocks (
@param This Indicates a pointer to the calling context.
@retval EFI_SUCCESS All outstanding data was written to the device
- @retval EFI_DEVICE_ERROR The device reported an error while writting back
the data
+ @retval EFI_DEVICE_ERROR The device reported an error while writing back
the data
@retval EFI_NO_MEDIA There is no media in the device.
**/
diff --git a/OvmfPkg/XenPvBlkDxe/XenPvBlkDxe.c
b/OvmfPkg/XenPvBlkDxe/XenPvBlkDxe.c
index bfe7b1a754cf..779a7f630c03 100644
--- a/OvmfPkg/XenPvBlkDxe/XenPvBlkDxe.c
+++ b/OvmfPkg/XenPvBlkDxe/XenPvBlkDxe.c
@@ -241,7 +241,7 @@ XenPvBlkDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
--
2.21.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#52794): https://edk2.groups.io/g/devel/message/52794
Mute This Topic: https://groups.io/mt/69395959/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
