On 12/19/19 1:14 PM, Pete Batard wrote:
This adds offset, base address, interrupt and register-space length
for the 2 UARTs that the Bcm283x SoC provides.
To be consistent, we simplify the two other existing base address
definitions to a more legible equivalent since there is no point
in explicit refs to FixedPcdGet64 (PcdBcm283xRegistersAddress).
Signed-off-by: Pete Batard <p...@akeo.ie>
---
Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h | 17
+++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
b/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
index 02107086d439..dd9a698f7218 100644
--- a/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
+++ b/Silicon/Broadcom/Bcm283x/Include/IndustryStandard/Bcm2836.h
@@ -24,8 +24,7 @@
/* watchdog constants */
#define BCM2836_WDOG_OFFSET 0x00100000
-#define BCM2836_WDOG_BASE_ADDRESS (FixedPcdGet64
(PcdBcm283xRegistersAddress) \
- +
BCM2836_WDOG_OFFSET)
+#define BCM2836_WDOG_BASE_ADDRESS
(BCM2836_SOC_REGISTERS + BCM2836_WDOG_OFFSET)
Good!
#define BCM2836_WDOG_PASSWORD 0x5a000000
#define BCM2836_WDOG_RSTC_OFFSET 0x0000001c
#define BCM2836_WDOG_WDOG_OFFSET 0x00000024
@@ -34,8 +33,7 @@
/* mailbox interface constants */
#define BCM2836_MBOX_OFFSET 0x0000b880
-#define BCM2836_MBOX_BASE_ADDRESS (FixedPcdGet64
(PcdBcm283xRegistersAddress) \
- +
BCM2836_MBOX_OFFSET)
+#define BCM2836_MBOX_BASE_ADDRESS
(BCM2836_SOC_REGISTERS + BCM2836_MBOX_OFFSET)
#define BCM2836_MBOX_READ_OFFSET 0x00000000
#define BCM2836_MBOX_STATUS_OFFSET 0x00000018
#define BCM2836_MBOX_CONFIG_OFFSET 0x0000001c
@@ -50,4 +48,15 @@
#define BCM2836_INTC_TIMER_CONTROL_OFFSET 0x00000040
#define BCM2836_INTC_TIMER_PENDING_OFFSET 0x00000060
+/* uart constants */
+#define BCM2836_PL011_UART_OFFSET 0x00201000
+#define BCM2836_PL011_UART_BASE_ADDRESS
(BCM2836_SOC_REGISTERS + BCM2836_PL011_UART_OFFSET)
+#define BCM2836_PL011_UART_LENGTH 0x00001000
+#define BCM2836_PL011_UART_INTERRUPT 0x99
Hmm 96 + 29 = 0x7D, 96 + 57 = 0x99. OK.
Maybe we can later add a definition for this '96'.
Reviewed-by: Philippe Mathieu-Daude <phi...@redhat.com>
+
+#define BCM2836_MINI_UART_OFFSET 0x00215000
+#define BCM2836_MINI_UART_BASE_ADDRESS
(BCM2836_SOC_REGISTERS + BCM2836_MINI_UART_OFFSET)
+#define BCM2836_MINI_UART_LENGTH 0x00000070
+#define BCM2836_MINI_UART_INTERRUPT 0x7D
+
#endif /*__BCM2836_H__ */
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#52416): https://edk2.groups.io/g/devel/message/52416
Mute This Topic: https://groups.io/mt/68829921/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
