From: Antoine Coeur <co...@gmx.fr>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.w...@intel.com>
Cc: Hao A Wu <hao.a...@intel.com>
Cc: Ray Ni <ray...@intel.com>
Reviewed-by: Philippe Mathieu-Daude <phi...@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <phi...@redhat.com>
---
MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h | 2 +-
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h | 6 +++---
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h | 2 +-
MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h | 6 +++---
MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h | 2 +-
MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c | 2 +-
MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c | 12 ++++++------
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c | 12 ++++++------
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c | 2 +-
MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c | 2 +-
MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c | 6 +++---
MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c | 10 +++++-----
MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c | 2 +-
13 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
index c0e461335f43..4e3e51d14403 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
@@ -244,7 +244,7 @@ EmmcPeimHcInitHost (
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
@param[in] Slot The slot number of the Emmc card to send the
command to.
- @param[in] Access The access mode of SWTICH command.
+ @param[in] Access The access mode of SWITCH command.
@param[in] Index The offset of the field to be access.
@param[in] Value The value to be set to the specified field of
EXT_CSD register.
@param[in] CmdSet The value of CmdSet field of EXT_CSD register.
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
index 86957a42daea..62e70ae912b0 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
@@ -43,7 +43,7 @@ EmmcReset (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -73,7 +73,7 @@ EmmcReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -176,7 +176,7 @@ EmmcReadBlocksEx (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
index d286d97f4213..5ecce41dee11 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
@@ -235,7 +235,7 @@ EmmcDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
index 769b47106400..b6b4c45f1f3d 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
@@ -43,7 +43,7 @@ SdReset (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -73,7 +73,7 @@ SdReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -176,7 +176,7 @@ SdReadBlocksEx (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
index d23f5a07a511..ff740a52183b 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
@@ -210,7 +210,7 @@ SdDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
index c60ac30421e6..19a0afcb6d2c 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
@@ -128,7 +128,7 @@ EmmcPeimAllocMemFromBlock (
//
// If current bit is zero, the corresponding memory unit is
// available, otherwise we need to restart our searching.
- // Available counts the consective number of zero bit.
+ // Available counts the consecutive number of zero bit.
//
if (!EMMC_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit)) {
Available++;
diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
index 679646eeb277..287a10266a6a 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
@@ -1290,7 +1290,7 @@ EmmcPeimExecTrb (
BlkCount = 0;
if (Trb->Mode != EmmcNoData) {
//
- // Calcuate Block Count.
+ // Calculate Block Count.
//
BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);
}
@@ -2017,7 +2017,7 @@ EmmcPeimGetExtCsd (
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
@param[in] Slot The slot number of the Emmc card to send the
command to.
- @param[in] Access The access mode of SWTICH command.
+ @param[in] Access The access mode of SWITCH command.
@param[in] Index The offset of the field to be access.
@param[in] Value The value to be set to the specified field of
EXT_CSD register.
@param[in] CmdSet The value of CmdSet field of EXT_CSD register.
@@ -2273,7 +2273,7 @@ EmmcPeimSendTuningBlk (
}
/**
- Tunning the clock to get HS200 optimal sampling point.
+ Tuning the clock to get HS200 optimal sampling point.
Command SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes
the
tuning procedure.
@@ -2509,7 +2509,7 @@ EmmcPeimSwitchToHighSpeed (
return Status;
}
//
- // Set to Hight Speed timing
+ // Set to High Speed timing
//
HostCtrl1 = BIT2;
Status = EmmcPeimHcOrMmio (Slot->EmmcHcBase + EMMC_HC_HOST_CTRL1, sizeof
(HostCtrl1), &HostCtrl1);
@@ -2658,7 +2658,7 @@ EmmcPeimSwitchToHS400 (
return Status;
}
//
- // Set to Hight Speed timing and set the clock frequency to a value less
than 52MHz.
+ // Set to High Speed timing and set the clock frequency to a value less than
52MHz.
//
HsTiming = 1;
Status = EmmcPeimSwitchClockFreq (Slot, Rca, HsTiming, 52);
@@ -2752,7 +2752,7 @@ EmmcPeimSetBusMode (
BusWidth = 4;
}
//
- // Get Deivce_Type from EXT_CSD register.
+ // Get Device_Type from EXT_CSD register.
//
Status = EmmcPeimGetExtCsd (Slot, &Slot->ExtCsd);
if (EFI_ERROR (Status)) {
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
index 1b247af57622..afdc0a57efc9 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
@@ -9,7 +9,7 @@
#include "EmmcDxe.h"
/**
- Nonblocking I/O callback funtion when the event is signaled.
+ Nonblocking I/O callback function when the event is signaled.
@param[in] Event The Event this notify function registered to.
@param[in] Context Pointer to the context data registered to the
@@ -785,7 +785,7 @@ Error:
@retval EFI_WRITE_PROTECTED The device can not be read/written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read/write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are
not valid,
or the buffer is not on proper alignment.
@@ -954,7 +954,7 @@ EmmcReset (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -993,7 +993,7 @@ EmmcReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -1151,7 +1151,7 @@ EmmcReadBlocksEx (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -2058,7 +2058,7 @@ EmmcEraseBlocks (
//
// If the size to erase is smaller than the erase group size, the whole
- // erase operation is performed by writting zeros.
+ // erase operation is performed by writing zeros.
//
if (BlockNum < EraseGroupSize) {
Status = EmmcWriteZeros (Partition, FirstLba, Size);
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
index e2ae56c5058a..e9095b904c56 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
@@ -812,7 +812,7 @@ EmmcDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
index 63a35cc2535c..fb043c19fffd 100644
--- a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
+++ b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
@@ -128,7 +128,7 @@ SdPeimAllocMemFromBlock (
//
// If current bit is zero, the corresponding memory unit is
// available, otherwise we need to restart our searching.
- // Available counts the consective number of zero bit.
+ // Available counts the consecutive number of zero bit.
//
if (!SD_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit)) {
Available++;
diff --git a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
index 5efc06af5f8d..756c3063bbff 100644
--- a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
+++ b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
@@ -1290,7 +1290,7 @@ SdPeimExecTrb (
BlkCount = 0;
if (Trb->Mode != SdNoData) {
//
- // Calcuate Block Count.
+ // Calculate Block Count.
//
BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);
}
@@ -2494,7 +2494,7 @@ SdPeimSendTuningBlk (
}
/**
- Tunning the sampling point of SDR104 or SDR50 bus speed mode.
+ Tuning the sampling point of SDR104 or SDR50 bus speed mode.
Command SD_SEND_TUNING_BLOCK may be sent up to 40 times until the host
finishes the
tuning procedure.
@@ -2702,7 +2702,7 @@ SdPeimSetBusMode (
return EFI_DEVICE_ERROR;
}
//
- // Set to Hight Speed timing
+ // Set to High Speed timing
//
if (AccessMode == 1) {
HostCtrl1 = BIT2;
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
index 876efe31e5d3..9f42abe7e2ad 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
@@ -9,7 +9,7 @@
#include "SdDxe.h"
/**
- Nonblocking I/O callback funtion when the event is signaled.
+ Nonblocking I/O callback function when the event is signaled.
@param[in] Event The Event this notify function registered to.
@param[in] Context Pointer to the context data registered to the
@@ -569,7 +569,7 @@ Error:
@retval EFI_WRITE_PROTECTED The device can not be read/written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read/write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are
not valid,
or the buffer is not on proper alignment.
@@ -721,7 +721,7 @@ SdReset (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -760,7 +760,7 @@ SdReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
@@ -918,7 +918,7 @@ SdReadBlocksEx (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block
size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not
valid,
or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
index e341b4cc1c8d..73bcc181c13f 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
@@ -563,7 +563,7 @@ SdDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
--
2.21.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#51622): https://edk2.groups.io/g/devel/message/51622
Mute This Topic: https://groups.io/mt/65773368/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
