Hi Leif,
śr., 26 cze 2019 o 11:31 Leif Lindholm <leif.lindh...@linaro.org> napisał(a):
>
> On Wed, Jun 26, 2019 at 09:04:14AM +0200, Marcin Wojtas wrote:
> > Ensure that in case of SlowMode or 3.3V operation,
> > also the HS400 capability will be disabled in the
> > SdMmc driver.
> >
> > Contributed-under: TianoCore Contribution Agreement 1.1
>
> Well done on keeping this tag. But I'm thinking we need to do that
> relicensing sooner rather than later, and drop the tag.
I left it, as this file is still not 2-clause SPDX tagged.
>
>
> However, can you clarify what problem this solves?
>
On another SoC revision, the capability register marks HS400 support
as enabled. However the interface itself is powered with 3.3V and it
turned out that my flags in SdMmcOverride driver did not cover this
case, which resulted in an unsuccessful EmmcSwitchToHS400 () execution
- it shouldn't be done at all.
Best regards,
Marcin
> /
> Leif
>
> > Signed-off-by: Marcin Wojtas <m...@semihalf.com>
> > ---
> > Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdhci.h | 1 +
> > Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdMmcOverride.c | 5 +++--
> > 2 files changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdhci.h
> > b/Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdhci.h
> > index 8bf1835..2d7c7f0 100644
> > --- a/Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdhci.h
> > +++ b/Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdhci.h
> > @@ -82,6 +82,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > #define SDHC_CAP_SDR50 BIT32
> > #define SDHC_CAP_SDR104 BIT33
> > #define SDHC_CAP_DDR50 BIT34
> > +#define SDHC_CAP_HS400 BIT63
> > #define SDHC_MAX_CURRENT_CAP 0x0048
> > #define SDHC_FORCE_EVT_AUTO_CMD 0x0050
> > #define SDHC_FORCE_EVT_ERR_INT 0x0052
> > diff --git a/Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdMmcOverride.c
> > b/Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdMmcOverride.c
> > index 7a9266e..55ebcf8 100644
> > --- a/Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdMmcOverride.c
> > +++ b/Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonSdMmcOverride.c
> > @@ -357,7 +357,8 @@ XenonSdMmcCapability (
> > Capability &= ~(UINT64)(SDHC_CAP_VOLTAGE_33 | SDHC_CAP_VOLTAGE_30);
> > } else {
> > Capability &= ~(UINT64)(SDHC_CAP_SDR104 | SDHC_CAP_DDR50 |
> > - SDHC_CAP_SDR50 | SDHC_CAP_VOLTAGE_18);
> > + SDHC_CAP_SDR50 | SDHC_CAP_HS400 |
> > + SDHC_CAP_VOLTAGE_18);
> > }
> >
> > if (!SdMmcDesc.Xenon8BitBusEnabled) {
> > @@ -365,7 +366,7 @@ XenonSdMmcCapability (
> > }
> >
> > if (SdMmcDesc.XenonSlowModeEnabled) {
> > - Capability &= ~(UINT64)(SDHC_CAP_SDR104 | SDHC_CAP_DDR50);
> > + Capability &= ~(UINT64)(SDHC_CAP_SDR104 | SDHC_CAP_DDR50 |
> > SDHC_CAP_HS400);
> > }
> >
> > Capability &= ~(UINT64)(SDHC_CAP_SLOT_TYPE_MASK);
> > --
> > 2.7.4
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#42883): https://edk2.groups.io/g/devel/message/42883
Mute This Topic: https://groups.io/mt/32212561/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
