Hi Michael, It seems that GCC build instructions does not work. Tried adding a line "cd .." before the line "mkdir Conf" then it worked.
> -----Original Message----- > From: Kinney, Michael D > Sent: Thursday, May 9, 2019 12:31 PM > To: devel@edk2.groups.io > Cc: Sun, Zailiang <zailiang....@intel.com>; Qian, Yi <yi.q...@intel.com> > Subject: [Patch 16/16] Vlv2TbltDevicePkg: Update Readme.md > > Cc: Zailiang Sun <zailiang....@intel.com> > Cc: Yi Qian <yi.q...@intel.com> > Signed-off-by: Michael D Kinney <michael.d.kin...@intel.com> > --- > Vlv2TbltDevicePkg/Readme.md | 232 +++++++++++++++++++++++++++++- > ------ > 1 file changed, 190 insertions(+), 42 deletions(-) > > diff --git a/Vlv2TbltDevicePkg/Readme.md b/Vlv2TbltDevicePkg/Readme.md > index 139aa4ea61..647d0ba361 100644 > --- a/Vlv2TbltDevicePkg/Readme.md > +++ b/Vlv2TbltDevicePkg/Readme.md > @@ -1,39 +1,18 @@ > # **EDK II firmware for Minnowboard Max/Turbot which is based on Intel > Valleyview2 SoC (Byatrail platform)** > > ---------- > - > - > -## **How to Create a Full Source Tree for Minnowboard Max/Turbot under > Windows** -### Pre-requisites > +# Windows Pre-requisites > > * GIT client: Available from https://git-scm.com/downloads > > -### Download Source Code > -* Create a new directory C:\WORKSPACE as an EDK II work space. > - > -* GIT clone operations required to pull the EDK II source tree and the edk2- > non-osi repository. Run below command in git bash or windows command > line. > - > - - cd C:\WORKSPACE > - - git clone https://github.com/tianocore/edk2.git > - - git clone https://github.com/tianocore/edk2-non-osi.git > - > - Note: The EDK II [Multiple > Workspace](https://github.com/tianocore/tianocore.github.io/wiki/Multiple > _Workspace) > -feature is used by this project. > - > -* Follow the instructions found in the file "OpenSSL-HOWTO.txt" in your > work space (e.g. > "C:\WORKSPACE\edk2\CryptoPkg\Library\OpensslLib\OpenSSL-HOWTO.txt") > to install the Openssl source code. > - > -## **Windows Build Instructions** > - > -### Pre-requisites Tools > - > * Microsoft Visual Studio. > - Visual Studio 2015 recommended and is used in the examples below. > Visual Studio 2013 is also supported. > - > + > * WINDDK > - Download Microsoft Windows Driver Development Kit 3790.1830 and > install it to C:\WINDDK\3790.1830. > - > -* Python 2.7 > - - Available from http://www.python.org. Install Python to C:\Python27, > and add the path "C:\Python27" to system environment variable > **PYTHON_HOME**. > + > +* Python 3 > + - https://www.python.org/downloads/ > > * Install iASL > - Install the iasl compiler by downloading iasl-win-20160527.zip from the > following @@ -42,34 +21,203 @@ feature is used by this project. > (create the folder "C:\ASL" if it does not exist). > > * Install the NASM* assembly language compiler > - - Download NASM* 2.12.02 binaries from > + - Download NASM* 2.12.02 binaries from > http://www.nasm.us/pub/nasm/releasebuilds/2.12.02/win64/nasm- > 2.12.02-win64.zip and place the > unzipped content ("nasm.exe") into the directory "C:\NASM" on your local > hard drive > (create the folder "C:\NASM" if it does not exist). Add the path > "C:\NASM\" to system environment variable **NASM_PREFIX**. > > * Install Openssl > - - Download a pre-compiled Openssl Windows binary from > - https://wiki.openssl.org/index.php/Binaries. Search for a Windows binary > in the list > - of "Third Party OpenSSL Related Binary Distributions". Go to the third > party > site to > - download the latest version. Download and extract to C:\Openssl, add the > path of openssl.exe > + - Download a pre-compiled Openssl Windows binary from > + https://wiki.openssl.org/index.php/Binaries. Search for a Windows binary > in the list > + of "Third Party OpenSSL Related Binary Distributions". Go to the third > party site to > + download the latest version. Download and extract to C:\Openssl, add > + the path of openssl.exe > ("C:\openssl") to system environment variable **OPENSSL_PATH**. > > +# Download and Build MinnowMax using Windows/Visual Studio > > +Run the script below from an empty directory. The script clones the > +EDK II repository from GitHub and downloads and unzips the binary > +support files for the MinnowBoard MAX. It then sets up the environment > +for EDK II builds and builds the MinnowBoard MAX firmware and generates > +UEFI Capsules that can be used to update the MinnowBoard MAX firmware > and three sample devices. > > -### Build Commands > - * cd C:\WORKSPACE\edk2\Vlv2TbltDevicePkg > +``` > +git clone --recurse-submodules https://github.com/tianocore/edk2.git > > - * To build 64-bit release version image: Build_IFWI.bat MNW2 Release > +powershell "& {[Net.ServicePointManager]::SecurityProtocol = > [Net.SecurityProtocolType]::Tls12; Invoke-WebRequest -Uri > "https://indy.fulgan.com/SSL/openssl-1.0.2r-x64_86-win64.zip -OutFile > openssl-1.0.2r-x64_86-win64.zip"}" > +powershell Expand-Archive openssl-1.0.2r-x64_86-win64.zip > > - * To build 64-bit debug version image: Build_IFWI.bat MNW2 Debug > - > - * To build 32-bit release version image: Build_IFWI.bat /IA32 MNW2 > Release > +powershell "& {[Net.ServicePointManager]::SecurityProtocol = > [Net.SecurityProtocolType]::Tls12; Invoke-WebRequest -Uri > "https://firmware.intel.com/sites/default/files/MinnowBoardMax- > Development190216.zip -OutFile MinnowBoardMax- > Development190216.zip"}" > +powershell Expand-Archive MinnowBoardMax-Development190216.zip > +sleep 1 > +rename MinnowBoardMax-Development190216 Vlv2Binaries cd > Vlv2Binaries > +powershell Expand-Archive Vlv2SocBinPkg.zip . > +sleep 1 > +cd .. > > - * To build 32-bit debug version image: Build_IFWI.bat /IA32 MNW2 Debug > +powershell "& {[Net.ServicePointManager]::SecurityProtocol = > [Net.SecurityProtocolType]::Tls12; Invoke-WebRequest -Uri > "https://www.nasm.us/pub/nasm/releasebuilds/2.13.03/win64/nasm- > 2.13.03-win64.zip -OutFile nasm-2.13.03-win64.zip"}" > +powershell Expand-Archive nasm-2.13.03-win64.zip . > > -### Output > -* After the build process successfully completes, the 8MB firmware binary > image will -be located in the following location on your local hard drive: > -"C:\WORKSPACE\edk2\Vlv2TbltDevicePkg\Stitch\" > +mkdir Conf > > +set WORKSPACE=%CD% > +set EDK_TOOLS_PATH=%WORKSPACE%\edk2\BaseTools > +set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\BinWrappers\WindowsLike > +set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\Vlv2Binaries > +path=%path%;%EDK_TOOLS_PATH%\Bin\Win32;%WORKSPACE%\openssl- > 1.0.2r-x64_8 > +6-win64 set NASM_PREFIX=%WORKSPACE%\nasm-2.13.03\ > > +cd %WORKSPACE%\edk2 > + > +call edkSetup.bat Rebuild > + > +cd Vlv2TbltDevicePkg > + > +Build_IFWI.bat /m /y MNW2 Debug > +``` > + > +Once all the code and tools are downloaded and installed, only the > +following commands are required to setup the environment. Run these > +from the same directory used to install the source and binaries. > + > +``` > +set WORKSPACE=%CD% > +set EDK_TOOLS_PATH=%WORKSPACE%\edk2\BaseTools > +set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\BinWrappers\WindowsLike > +set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\Vlv2Binaries > +path=%path%;%EDK_TOOLS_PATH%\Bin\Win32;%WORKSPACE%\openssl- > 1.0.2r-x64_8 > +6-win64 set NASM_PREFIX=%WORKSPACE%\nasm-2.13.03\ > + > +cd %WORKSPACE%\edk2 > + > +call edkSetup.bat Rebuild > +``` > + > +Once the environment is setup, the MinnowBoard MAX firmware and > +capsules can be rebuilt using the following commands. > + > +* Build Debug Image > + > +``` > +cd Vlv2TbltDevicePkg > +Build_IFWI.bat /m /y MNW2 Debug > +``` > + > +* Build Release Image > + > +``` > +cd Vlv2TbltDevicePkg > +Build_IFWI.bat /m /y MNW2 Release > +``` > + > +The generated firmware image is the newest `.bin` file in > `edk2/Vlv2TbltDevicePkg/Stitch`. > +The file is in the form `MNW2MAX1.X64.0084.D01.<DATE>.bin`. > + > +The CapsuleApp and generated UEFI Capsules are in > +`Build/Vlv2TbltDevicePkg/Capsules` > + > +# Download and Build MinnowMax using Linux/GCC > + > +Run the script below from an empty directory. The script clones the > +EDK II repository from GitHub and downloads and unzips the binary > +support files for the MinnowBoard MAX. It then sets up the environment > +for EDK II builds and builds the MinnowBoard MAX firmware and generates > +UEFI Capsules that can be used to update the MinnowBoard MAX firmware > and three sample devices. > + > +``` > +git clone --recurse-submodules https://github.com/tianocore/edk2.git > + > +mkdir Vlv2Binaries > +cd Vlv2Binaries > +wget > +https://firmware.intel.com/sites/default/files/MinnowBoardMax- > Developme > +nt190216.zip unzip MinnowBoardMax-Development190216.zip > +unzip Vlv2SocBinPkg.zip > + > +mkdir Conf > + > +export WORKSPACE=$PWD/edk2 > +export PACKAGES_PATH=$PWD/Vlv2Binaries > +export EDK_TOOLS_PATH=$WORKSPACE/BaseTools > + > +cd edk2 > +cd Vlv2TbltDevicePkg > +. Build_IFWI.sh MNW2 Debug > +``` > + > +Once all the code is downloaded and installed, only the following > +commands are required to setup the environment. Run these from the > +same directory used to install the source and binaries. > + > +``` > +export WORKSPACE=$PWD/edk2 > +export PACKAGES_PATH=$PWD/Vlv2Binaries > +export EDK_TOOLS_PATH=$WORKSPACE/BaseTools > + > +cd edk2 > +cd Vlv2TbltDevicePkg > +``` > + > +Once the environment is setup, the MinnowBoard MAX firmware and > +capsules can be rebuilt using the following commands. > + > + > +* Build Debug Image > + > +``` > +cd Vlv2TbltDevicePkg > +./Build_IFWI.sh MNW2 Debug > +``` > + > +* Build Release Image > + > +``` > +cd Vlv2TbltDevicePkg > +./Build_IFWI.sh MNW2 Release > +``` > + > +The generated firmware image is the > `MNW2MAX_X64_D_0084_01_GCC.bin` > +file in `edk2\Vlv2TbltDevicePkg\Stitch` > + > +The CapsuleApp and generated UEFI Capsules are in > +`Build\Vlv2TbltDevicePkg\Capsules` > + > +# Use DediProg to update FLASH image on a MinnowBoard MAX Target > + > +# Update MinnowBoard MAX Firmware from UEFI Capsules > + > +* Copy the `Build/Vlv2TbltDevicePkg/Capsules` directory to a USB FLASH > +drive > +* Connect USB FLASH Drive to MinnowBoard MAX > +* Boot MinnowBoard MAX to the Boot Manager > +* Boot the `EFI Internal Shell` boot option > +* Mount the USB FLASH Drive (usually `FS1`) > +* Use `cd` command to go to `Capsules/TestCert` directory > +* Run the following command to apply all four capsules > + > +``` > +CapsuleApp.efi Red.cap Green.cap Blue.cap MinnowMax.cap ``` > + > +* The MinnowBoard MAX should reboot and the four capsules are applied > +in the > + order listed. The progress bar matches the color name of the capsule. > + MinnowMax.cap uses the color purple. Once all capsules are > +processed, the > + MinnowBoard MAX should reboot again using the new firmware images. > + > +# Generate and Test a UX BitMap Capsule > + > +* Use bitmap editor to generate a BMP file. Recommend resolution of > +600 wide > + by 100 tell and either 24 or 32 bits per pixel. > +* Save BMP file to USB FLASH drive > +* Use CapsuleApp.efi to convert BMP file to a UX Capsule > + > +``` > +CapsuleApp.efi -G MyImage.bmp -O MyImage.cap ``` > + > +* When updating firmware using capsules, add UX capsule to the list of > +capsules > + passed into CapsuleApp.efi. > + > +``` > +CapsuleApp.efi MyImage.cap Red.cap Green.cap Blue.cap MinnowMax.cap > ``` > + > +* When the capsules are processed the UX bitmap image should be > +displayed at the > + bottom of the screen. > -- > 2.21.0.windows.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#40303): https://edk2.groups.io/g/devel/message/40303 Mute This Topic: https://groups.io/mt/31551785/21656 Group Owner: devel+ow...@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
