> -----Original Message----- > From: Li, Johnson > Sent: Wednesday, July 13, 2016 1:26 AM > To: dev@openvswitch.org > Cc: Li, Johnson <johnson...@intel.com> > Subject: [RFC PATCH v2 00/13] Add Network Service Header Support > > --- > Change Log: > V1->V2: 1. Add prototype for MD type 2 support. Since the MD type 2 > uses the same TLV format of Geneve, so this patch set > implements a prototype for MD type 2 support by reusing > the TUN_METADATA APIs and data structures for Geneve. BTW, > all the Geneve specific APIs will be renamed to be more > generic in the following patch iterations if this approach > makes sense. > 2. Add Ethernet transport support. To remove the dependency > on Simon' patches for raw protocol support, we enable > Ethernet as a supported NSH transport. Hence explicit flow > actions push_eth/pop_eth to push/pop Ethernet header are added. > This patch set is still RFC patch for open discussion. The patch set mainly contains MD type 2 prototype and push_eth/pop_eth support. Any comments/advice Are welcome! Thanks! > -- > 1.8.4.2
-------------------------------------------------------------- Intel Research and Development Ireland Limited Registered in Ireland Registered Office: Collinstown Industrial Park, Leixlip, County Kildare Registered Number: 308263 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev