Tests like the ones in ofproto.at, which test functionality, are more important than the ones in ofp-print.at, which test message decoding and printing, but it's best to have both.
On Fri, Feb 26, 2016 at 09:57:48PM +0000, André Mantas wrote: > Ok, makes sense. So I should focus on making similar tests to the ones in > ofproto.at? Or these are also important? > > Thanks. > > Ben Pfaff <b...@ovn.org> escreveu no dia sexta, 26/02/2016 às 20:35: > > > On Fri, Feb 26, 2016 at 08:07:32PM +0000, André Mantas wrote: > > > I've seen some examples in ofp-print.at, ofproto.at and was trying to > > > figure them out so I could add more. > > > > > > (ofp-print.at) > > > AT_SETUP([OFPT_BUNDLE_ADD_MESSAGE - PORT_MOD]) > > > AT_KEYWORDS([ofp-print]) > > > AT_CHECK([ovs-ofctl ofp-print "\ > > > 05 22 00 38 00 00 00 03 00 00 00 01 00 00 00 01 \ > > > 05 10 00 28 00 00 00 03 00 00 00 03 00 00 00 00 \ > > > 50 54 00 00 00 01 00 00 00 00 00 01 00 00 00 01 \ > > > 00 00 00 08 00 00 00 01 > > > "], [0], [dnl > > > OFPT_BUNDLE_ADD_MESSAGE (OF1.4) (xid=0x3): > > > bundle_id=0x1 flags=atomic > > > OFPT_PORT_MOD (OF1.4) (xid=0x3): port: 3: addr:50:54:00:00:00:01 > > > config: PORT_DOWN > > > mask: PORT_DOWN > > > advertise: 10MB-HD > > > ]) > > > > > > From ofproto.at I can see that: > > > > > > 05 - OpenFlow14 message > > > 22 - OFPT_BUNDLE_ADD_MESSAGE (?) > > > > > > I also tried to search for ovs-ofctl ofp-print syntax or help but > > couldn't > > > find it. > > > > > > Any help? > > > > ofp-print takes a hexdump of an OpenFlow message and prints it on stdout > > with ofp_print() from lib/ofp-print.c. It's there to test decoding and > > printing OpenFlow messages. > > > > It's not documented because it's meant for internal testing, not as an > > end user interface. > > _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
