Hello Ilya, The dpdkr ports involved have just one TX queue, so it should not be the reason in this case.
Thank you very much, On 30 December 2015 at 07:07, Ilya Maximets <i.maxim...@samsung.com> wrote: > Your 'Source' application, most likely, directs packets of the same flow > to different TX queues. That's why most of pmd threads can't install a ukey > and always executes a misses instead of emc hits. > > Fix your 'Source'. > > Best regards, Ilya Maximets. > > On 29.12.2015 22:19, Mauricio Vásquez wrote: > > Hello to all, > > > > I am performing some performance testing using OVS with DPDK and I am > > having some issues when I change the number of PMD cores that ovs uses. > > > > The testing architecture consists of a source and sink processes, the > > source allocates some packets from the memory pool at the beginning and > > then sends them in an infinite loop, the sink process just receives the > > packets and counts them. In between, there is a forwarder application > that > > just takes packets from a port and sends them into another. > > > > Source and sink are executed as secondary DPDK-processes while the > > forwarding app is executed within a VM. Source and Sink are connected to > > ovs using a dpdkr port each one, the VM is connected using two dpdkr > ports, > > it means that there are a total of 4 dpdkr ports involved. > > > > OpenFlow rules are configured to forward traffic in the following way: > > Source -> Forwarder (app in the VM) -> Sink > > > > The testing machine has 10 physical cores, core 0 is available to the OS > > while the others are isolated. Source, Sink and Forwarder are pinned to > > different physical cores. The PMD cores assigned to OvS are independent > > from the ones assigned to Source, Sink and Forwarder. > > > > We are trying to understand how the number of PMD cores affects the > > performance. > > With 1 and 2 cores assigned to OvS we get a performance of about 7 Mpps, > > but when we use 3 or 4 cores the performance decreases to only 750 kpps. > I > > noticed that the core 0 (used by the OS) is used a 32%, additionally OvS > > prints the messages > > "ofproto_dpif_upcall(pmd119)|WARN|Dropped 13210124 log messages in last > 60 > > seconds (most recently, 0 seconds ago) due to excessive rate" > > "ofproto_dpif_upcall(pmd119)|WARN|upcall_cb failure: ukey installation > > fails" > > > > Does anyone know why this behaviour? > > > > PD: I'm using DPDK v2.1.0 and ovs commit > > 15a0ca65f341c2298e571052eb68d8a282e853a5 > > > > Thank you very much for your help. > > > _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
