Where does the traffic forwarded to bond0 come from, and how is it forwarded to the bond?
On Mon, Sep 15, 2014 at 10:44:50PM -0500, Yi Zhang wrote: > I added a bond interface consisted of eth1 and eth2 in active-backup mode. > > Test traffic was sent to bond. > > Sent from my iPhone > > > On Sep 15, 2014, at 10:39 PM, Ben Pfaff <b...@nicira.com> wrote: > > > > Please explain the scenario better. > > > > Is the test traffic received on eth1 or eth2? Or is received on some > > other interface and being sent out bond0? > > > >> On Mon, Sep 15, 2014 at 10:36:43PM -0500, Yi Zhang wrote: > >> The test traffic was sent to bond0. Traffic appears to be received > >> from active eth1 and backup eth2. This means the backup eth2 > >> responded to arp which is not expected in the active-backup mode. > >> > >> Sent from my iPhone > >> > >>> On Sep 15, 2014, at 10:04 PM, Ben Pfaff <b...@nicira.com> wrote: > >>> > >>> Why are you sending your question as a reply to a thread from 2012? > >>> > >>>> On Mon, Sep 15, 2014 at 09:50:42PM -0500, Yi Zhang wrote: > >>>> I am testing OVS bonding in active-backup mode (eth1 and eth2). > >>>> However I am seeing packets being TX from both eth1 and eth2. That is > >>>> not what I would expect. Any help would be appreciated. > >>> > >>> I suspect that your tcpdumps are showing a packet going out from eth1 > >>> and then coming back, through the first-hop switch, on eth2 (or vice > >>> versa). I don't know how to tell whether this is happening from tcpdump > >>> output. _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
