Please explain the scenario better. Is the test traffic received on eth1 or eth2? Or is received on some other interface and being sent out bond0?
On Mon, Sep 15, 2014 at 10:36:43PM -0500, Yi Zhang wrote: > The test traffic was sent to bond0. Traffic appears to be received > from active eth1 and backup eth2. This means the backup eth2 > responded to arp which is not expected in the active-backup mode. > > Sent from my iPhone > > > On Sep 15, 2014, at 10:04 PM, Ben Pfaff <b...@nicira.com> wrote: > > > > Why are you sending your question as a reply to a thread from 2012? > > > >> On Mon, Sep 15, 2014 at 09:50:42PM -0500, Yi Zhang wrote: > >> I am testing OVS bonding in active-backup mode (eth1 and eth2). > >> However I am seeing packets being TX from both eth1 and eth2. That is > >> not what I would expect. Any help would be appreciated. > > > > I suspect that your tcpdumps are showing a packet going out from eth1 > > and then coming back, through the first-hop switch, on eth2 (or vice > > versa). I don't know how to tell whether this is happening from tcpdump > > output. _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
