Hi Alin Sorry, but I am a little confused. So, the two VM’s on different HyperV can ping each other, but the ping is not encapsulated in a VXLAN header? Is that what you are seeing.
Thanks! Saurabh From: Alin Serdean <aserd...@cloudbasesolutions.com<mailto:aserd...@cloudbasesolutions.com>> Date: Friday, July 25, 2014 at 8:30 PM To: Saurabh Shah <ssaur...@vmware.com<mailto:ssaur...@vmware.com>>, Alessandro Pilotti <apilo...@cloudbasesolutions.com<mailto:apilo...@cloudbasesolutions.com>> Cc: "dev@openvswitch.org<mailto:dev@openvswitch.org>" <dev@openvswitch.org<mailto:dev@openvswitch.org>> Subject: RE: [ovs-dev] [PATCH v2 0/3] Support for OVS datapath on Windows platform. I have disabled the RX/TX checksum offload on both HyperV and VM's (also tried with a KVM). The pings work but they are not encapsulated using VXLAN. Kind Regards, Alin. ________________________________________ From: Saurabh Shah [ssaur...@vmware.com<mailto:ssaur...@vmware.com>] Sent: Saturday, July 26, 2014 5:50 AM To: Alin Serdean; Alessandro Pilotti Cc: dev@openvswitch.org<mailto:dev@openvswitch.org> Subject: Re: [ovs-dev] [PATCH v2 0/3] Support for OVS datapath on Windows platform. I disabled RX/TX (02) works (03) works Here is a flow with a tun_id maybe it will help: PS C:\ovs_guys\binaries> .\ovs-dpctl.exe dump-flows | findstr tun 2014-07-26T02:10:30Z|00001|socket_util|ERR|4789:0.0.0.0: bind: Only one usage of each socket address (protocol/network a ddress/port) is normally permitted. skb_priority(0),skb_mark(0),in_port(16777216),eth(src=00:0c:29:45:77:70,ds t=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip= 10.13.8.101,tip=10.13.8.160,op=1,sha=00:0c:29:45:77:70,tha=00:00:00:00:00: 00), packets:0, bytes:0, used:never, actions:1 6777225,16777289,16777288,set(tunnel(tun_id=0x0,src=10.13.8.101,dst=10.13. 8.160,tos=0x0,ttl=64,flags(df,key))),16777218 PS C:\ovs_guys\binaries> I can see it trying but not for the VMs they still don't trasmit under VXLAN. I am assuming you have disabled RX/TX checksum on both the HyperV¹s and the VM¹s. So, do the pings work now? You mentioned that (02) and (03) works, but the comment above seems to suggest that something is still not working. Saurabh _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev