> >I disabled RX/TX >(02) works >(03) works > >Here is a flow with a tun_id maybe it will help: >PS C:\ovs_guys\binaries> .\ovs-dpctl.exe dump-flows | findstr tun >2014-07-26T02:10:30Z|00001|socket_util|ERR|4789:0.0.0.0: bind: Only one >usage of each socket address (protocol/network a >ddress/port) is normally permitted. >skb_priority(0),skb_mark(0),in_port(16777216),eth(src=00:0c:29:45:77:70,ds >t=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip= >10.13.8.101,tip=10.13.8.160,op=1,sha=00:0c:29:45:77:70,tha=00:00:00:00:00: >00), packets:0, bytes:0, used:never, actions:1 >6777225,16777289,16777288,set(tunnel(tun_id=0x0,src=10.13.8.101,dst=10.13. >8.160,tos=0x0,ttl=64,flags(df,key))),16777218 >PS C:\ovs_guys\binaries> > >I can see it trying but not for the VMs they still don't trasmit under >VXLAN.
I am assuming you have disabled RX/TX checksum on both the HyperV¹s and the VM¹s. So, do the pings work now? You mentioned that (02) and (03) works, but the comment above seems to suggest that something is still not working. Saurabh _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
