On Thu, Dec 05, 2013 at 11:26:06AM +0900, Simon Horman wrote:
> On Wed, Dec 04, 2013 at 05:01:11PM -0800, Ben Pfaff wrote:
> > On Thu, Dec 05, 2013 at 09:51:39AM +0900, Simon Horman wrote:
> > > On Wed, Dec 04, 2013 at 04:44:17PM -0800, Ben Pfaff wrote:
> > > > On Thu, Dec 05, 2013 at 08:58:49AM +0900, Simon Horman wrote:
> > > > > On Wed, Dec 04, 2013 at 01:24:29PM -0800, Ben Pfaff wrote:
> > > > > > On Thu, Nov 21, 2013 at 12:46:42PM +0900, Simon Horman wrote:
> > > > > > > The aim of this patch is to support provide infrastructure for
> > > > > > > verification
> > > > > > > of VLAN actions after an mpls_push action for OpenFlow1.3. This
> > > > > > > supplements
> > > > > > > existing support for verifying these actions for pre-OpenFlow1.3.
> > > > > > >
> > > > > > > In OpenFlow1.1 and 1.2 MPLS tags are pushed after any VLAN tags
> > > > > > > that
> > > > > > > immediately follow the ethernet header. This is pre-OpenFlow1.3
> > > > > > > tag
> > > > > > > ordering. Open vSwitch also uses this ordering when supporting
> > > > > > > MPLS
> > > > > > > actions via Nicira extensions to OpenFlow1.0.
> > > > > > >
> > > > > > > When using pre-OpenFlow1.3 tag ordering an MPLS push action does
> > > > > > > not
> > > > > > > affect the VLANs of a packet. If VLAN tags are present
> > > > > > > immediately after
> > > > > > > the ethernet header then they remain present there.
> > > > > > >
> > > > > > > In of OpenFlow1.3+ MPLS LSEs are pushed before any VLAN tags that
> > > > > > > immediately follow the ethernet header. This is OpenFlow1.3+ tag
> > > > > > > ordering.
> > > > > > >
> > > > > > > When using OpenFlow1.3+ tag ordering an MPLS push action affects
> > > > > > > the
> > > > > > > VLANs of a packet as any VLAN tags previously present after the
> > > > > > > ethernet
> > > > > > > header are moved to be immediately after the newly pushed MPLS
> > > > > > > LSE. Thus
> > > > > > > for the purpose of action consistency checking a packet may be
> > > > > > > changed
> > > > > > > from a VLAN packet to a non-VLAN packet.
> > > > > > >
> > > > > > > In this way the effective value of the VLAN TCI of a packet may
> > > > > > > differ
> > > > > > > after an MPLS push depending on the OpenFlow version in use.
> > > > > > >
> > > > > > > This patch does not enable the logic described above.
> > > > > > > Rather it is disabled in ofpacts_check__(). It should
> > > > > > > be enabled when support for OpenFlow1.3+ tag order is added
> > > > > > > and enabled.
> > > > > > >
> > > > > > > Signed-off-by: Simon Horman <ho...@verge.net.au>
> > > > > >
> > > > > > As far as I can tell this doesn't make sense, because where the MPLS
> > > > > > tag goes is a property of the action that we know at the time we
> > > > > > parse
> > > > > > the push_mpls action. So why isn't this patch just the following?
> > > > > >
> > > > > > diff --git a/lib/ofp-actions.c b/lib/ofp-actions.c
> > > > > > index a02f842..f444374 100644
> > > > > > --- a/lib/ofp-actions.c
> > > > > > +++ b/lib/ofp-actions.c
> > > > > > @@ -2071,6 +2071,9 @@ ofpact_check__(enum ofputil_protocol
> > > > > > *usable_protocols, struct ofpact *a,
> > > > > > * Thus nothing can be assumed about the network protocol.
> > > > > > * Temporarily mark that we have no nw_proto. */
> > > > > > flow->nw_proto = 0;
> > > > > > + if (ofpact_get_PUSH_MPLS(a)->position ==
> > > > > > OFPACT_MPLS_BEFORE_VLAN) {
> > > > > > + flow->vlan_tci = 0;
> > > > > > + }
> > > > > > return 0;
> > > > >
> > > > > That was more or less what I originally tried. However I believe
> > > > > that it
> > > > > doesn't work because ofpact_get_PUSH_MPLS(a)->position may not have
> > > > > been
> > > > > set at the time that ofpact_check__ is called. In particular this
> > > > > occurs
> > > > > when it is called indirectly from parse_ofp_str__.
> > > > >
> > > > > Moreover, when ofpact_check__ is called indirectly from
> > > > > parse_ofp_str__ it
> > > > > is used to check actions when a one of number of protocols may be
> > > > > used,
> > > > > that is multiple bits of *usable_protocols. If we could rely on
> > > > > ofpact_get_PUSH_MPLS(a)->position then I believe that implies that if
> > > > > it is
> > > > > set to OFPACT_MPLS_BEFORE_VLAN all pre-OpenFlow1.3 bits of
> > > > > *usable_protocols need to be cleared. Otherwise all OpenFlow1.3+ bits
> > > > > would need to be cleared.
> > > >
> > > > I think this might be a mistake in how we define the syntax that
> > > > parse_ofp_str__() parses. If I write "actions=push_mpls" on an
> > > > ovs-ofctl command line, then I want that to have some specific
> > > > meaning. I don't want it to mean "do one thing if you happen to
> > > > negotiate OpenFlow 1.2 or some other thing if you happen to negotiate
> > > > OpenFlow 1.3", because that's totally unusable and broken from a user
> > > > perspective.
> > >
> > > To clarify, that is exactly what this series was trying to do.
> > >
> > > I think there is some precedence in the handling of actions
> > > that set_vlans. Some OF versions implicitly push a tag, some don't.
> >
> > Maybe that is worth fixing too.
> >
> > > But I do agree that the behaviour you describe above would
> > > be very confusing for users.
> > >
> > > > So if that the issue then I think we should change the
> > > > syntax. One way would be to have "push_mpls" default to the 1.3
> > > > behavior (which seems generally saner) and allow the user to specify
> > > > an option to get the 1.2 behavior.
> > >
> > > Sure, I think I am happy with that idea.
> > >
> > > By an option do you mean a different action name, for example append_mpls,
> > > or push_mpls_after_vlan?
> >
> > I was thinking of something like a push_mpls version of the
> > keyword-based fin_timeout syntax. One option would be eth_type,
> > defaulting to ETH_TYPE_MPLS. Another option would be position, with
> > after_vlan or before_vlan as allowed values, and probably after_vlan
> > as the default.
> >
> > With this approach, any flow with a push_mpls could be used only with
> > pre-OF1.3 or OF1.3+, depending on the "position" value. One wrinkle
> > that might be nice, if it isn't too nasty to implement, would be to
> > have a third value "no_vlan" as the default. With no_vlan, we reject
> > the flow at check time if a VLAN is present; if no VLAN is present,
> > then push_mpls has the same behavior regardless of OpenFlow version.
>
> From an ovs-ofctl point of view I think that makes a lot of sense and I
> think it should be clean enough to implement. My initial reaction is that
> using a position argument would be good and I don't see any particular
> problem with a no_vlan option. But I'll give some thought to an eth_type
> argument.
push_mpls currently takes a required eth_type argument. There are only
two values and my understanding is that 0x8847 is more common, hence my
suggestion that it be the default.
> I would like to clarify how you would like push_mpls to work in the case
> where flows are received from a controller. It seems to me that the
> behaviour should depend on the OpenFlow version used by the connection with
> the controller as we can't change the action to accommodate an extra
> argument.
Right, when push_mpls is received over OpenFlow then it always behaves
as the particular OpenFlow version specifies.
> I think this is also easy enough to implement: actually I am pretty
> sure think the series currently does that and that the difficulty that
> this patch tried to address is only on the ovs-ofctl side. Regardless,
> I wanted to check that is the behaviour that you would like.
I hope I clarified, let me know if it's still unclear.
_______________________________________________
dev mailing list
dev@openvswitch.org
http://openvswitch.org/mailman/listinfo/dev
