On Wed, Aug 1, 2012 at 10:44 AM, Ben Pfaff <b...@nicira.com> wrote: > On Wed, Aug 01, 2012 at 10:39:50AM -0700, Gurucharan Shetty wrote: > > On Thu, Jul 26, 2012 at 10:27 PM, Ben Pfaff <b...@nicira.com> wrote: > > > > > Signed-off-by: Ben Pfaff <b...@nicira.com> > > > --- > > > FAQ | 93 > > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > 1 files changed, 93 insertions(+), 0 deletions(-) > > > > > > diff --git a/FAQ b/FAQ > > > index bdd96ce..7cba6f0 100644 > > > --- a/FAQ > > > +++ b/FAQ > > > @@ -168,6 +168,99 @@ A: Tunnel and patch virtual ports are not > supported, > > > as described in the > > > may not be transmitted. > > > > > > > > > +Basic Configuration > > > +------------------- > > > + > > > +Q: How do I configure a port as an access port? > > > + > > > +A: Add "tag=VLAN" to your "ovs-vsctl add-port" command. For example, > > > + the following commands configure br0 with eth0 as a trunk port (the > > > + default) and tap0 as an access port for VLAN 9: > > > + > > > + ovs-vsctl add-br br0 > > > + ovs-vsctl add-port br0 eth0 > > > + ovs-vsctl add-port br0 tap0 tag=9 > > > + > > > + If you want to configure an already added port as an access port, > > > + use "ovs-vsctl set", e.g.: > > > + > > > + ovs-vsctl set port tap0 tag=9 > > > + > > > +Q: How do I configure a port as a SPAN port, that is, enable mirroring > > > + of all traffic to that port? > > > + > > > +A: The following commands configure br0 with eth0 and tap0 as trunk > > > + ports. All traffic coming in or going out on eth0 or tap0 is also > > > + mirrored to tap1; any traffic arriving on tap1 is dropped: > > > + > > > + ovs-vsctl add-br br0 > > > + ovs-vsctl add-port br0 eth0 > > > + ovs-vsctl add-port br0 tap0 > > > + ovs-vsctl add-port br0 tap1 \ > > > + -- --id=@p get port tap1 \ > > > + -- --id=@m create mirror name=m0 select-all=true > output-port=@p > > > \ > > > + -- set bridge br0 mirrors=@m > > > > > Shouldn't we be using "_" instead of "-" in output-port? Same for all > other > > commands below. > > For column names it doesn't matter, because ovs-vsctl accepts both > forms. >
git am says there is a whitespace. Otherwise, this looks good.
_______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev
