Hi all, the voting is closed
We will fix the bugs and start the RC1 test and vote process Please link fixes to this thread Best regards Alin On Mon, 7 Oct 2024, 09:12 raiden00pl, <raiden0...@gmail.com> wrote: > I fully agree with Tomek. If possible, let's delay the release for a while > and fix what's broken, or at least find the broken configurations/features. > > What I have tested so far: > - [X] sim/foc - fixed > - [X] sim/smp - **broken** > - [X] sim/nsh - OK > - [X] sim/crypto - OK > - [X] sim/elf - OK > - [X] sim/fb - OK > - [X] sim/lvgl_fb - OK > > - [X] nrf52840-dk/adc - OK > - [X] nrf52840-dk/pwm - OK > - [X] nrf52840-dk/highpri - **boken** > other highpri examples also broken > - [X] nrf52840-dk/sdc_nimble - OK > - [X] nrf52840-dk/sdc - OK > - [X] nrf52840-dk/composite - OK > - [X] nrf52840-dk/timer - fixed > - [X] nrf52840-dk/tickelss - OK > - [X] nrf52840-dk/qspi - OK > > - [X] stm32f4disco/nsh - OK > - [X] stm32f4disco/elf - OK > - [X] stm32f4disco/module - OK > - [X] stm32f4disco/usbnsh - OK > > - [X] stm32g071b-disco/oled - fixed > > - [X] stm32f746g-disco/nsh - OK > - [X] stm32f746g-disco/fb - *broken* (not related to LVGL) > - [X] stm32f746g-disco/nxdemo - *broken* (not related to LVGL) > - [X] stm32f746g-disco/audio - OK > > What else I want to test: > stm32h7 AMP, nrf53, nrf91, x86_64, some CAN examples, maybe FOC on real > hardware, maybe IEEE802.15.4 on nrf52. > But I don't know how much patience I'll have, it's a completely boring job. > > pon., 7 paź 2024 o 01:20 Tomek CEDRO <to...@cedro.info> napisał(a): > > > Please lets wait for LVGL 9.2.1 release, we have patches ready to get > > in sync, this is quite important and demanded feature to land in a > > release, and I am sure this will attract new users/developers to the > > NuttX community because this will be also announced to the broad LVGL > > community :-) > > > > Also we should fix ESP32 bootloader / esptool building unusable > > firmware image, this platform is too popular to have this kind of > > problem. > > > > If anyone has a free moment to verify in depth the memory leak that > > would be also very good to know why that happens - is it ostest > > problem or nsh / os problem coming from recent updates? > > > > I know Alin the release process is time consuming and cost you lots of > > effort, and additional problems cost you additional work time, we all > > much appreciate that!! <3 :-) > > > > Release quality is far more important than quantity, its not only > > about bumping numbers. I know from other projects that rushing the > > release with known problems behind may be strongly discouraging and > > pushes people away from a project. We all want to create a reliable > > solution that works out of the box with no surprises right? :-) > > > > Have a good day folks :-) > > Tomek > > > > > > On Sat, Oct 5, 2024 at 11:11 AM Tim Hardisty <timhardist...@gmail.com> > > wrote: > > > > > > FYI you can no longer change LVGL version from Kconfig AFAIK, but you > > can force the use of any version you want by checking out the version you > > want from the LVGL repo but have to do a manual copy of the LVGL K config > > into the NuttX Apps LVGL Kconfig. It’s a bit messy but works! > > > > > > > > > > On 5 Oct 2024, at 10:56, Alin Jerpelea <jerpe...@gmail.com> wrote: > > > > > > > > @Tim and Tomek > > > > > > > > My bad ! We are using 9.1.0 for 12.7.0 release > > > > I was looking on an older branch . A simple PR will fix it after LVGL > > is > > > > release > > > > > > > > Best regards > > > > Alin > > > > > > > > > > > >> On Sat, Oct 5, 2024 at 10:52 AM Tim Hardisty < > timhardist...@gmail.com > > > > > > >> wrote: > > > >> > > > >> 12.7 should be using LVGL 9.1. 9.1 has a specific frame buffer > problem > > > >> fixed in 9.2. > > > >> > > > >> I have a custom SAMA5D2 board with an LCD running NuttX master and > > LVGL > > > >> 9.2 and I will try the RC on Monday. > > > >> > > > >>>> On 5 Oct 2024, at 10:33, Alin Jerpelea <jerpe...@gmail.com> > wrote: > > > >>> > > > >>> Hi Tomek, > > > >>> Thanks for testing and providing feedback. > > > >>> > > > >>> 1. There are memory leak problems reported > > > >>> This is something that we should test on more boards > > > >>> > > > >>> 2. There are LVGL screen problems reported. > > > >>> NuttX 12.7 uses LVGL 8.3.3 by default but this can be changed in > the > > menu > > > >>> > > > >>> config LVGL_VERSION > > > >>> string "LVGL Version" > > > >>> default "8.3.3" > > > >>> > > > >>> 3.I have found a problem on ESP32 with esptool version 4.7 > > > >>> Can be updated locally or we can include it in RC1 and restart the > > vote > > > >>> > > > >>> Considering that we have known bugs in the release that affect some > > > >> boards > > > >>> we have 2 options: > > > >>> 1) we can stop the release and delay it for an unknown amount of > time > > > >> until > > > >>> the bugs are fixed (in some cases for external projects) > > > >>> 2) we can release and specify what are the known bugs > > > >>> > > > >>> https://cwiki.apache.org/confluence/display/NUTTX/NuttX+12.7.0 > > > >>> > > > >>> I would like to propose the second option > > > >>> > > > >>>> On Sat, Oct 5, 2024 at 2:00 AM Tomek CEDRO <to...@cedro.info> > > wrote: > > > >>>> > > > >>>> Hello world :-) > > > >>>> > > > >>>> There goes -1 from me, sorry :-P :-P > > > >>>> > > > >>>> 1. There are memory leak problems reported that I tried to confirm > > on > > > >>>> STM32F769. Is it ostest problem only or more general memory > > management > > > >>>> issue? > > > >>>> > > > >>>> before ostest total/used: 483056 / 10112. > > > >>>> after ostest total/used: 483056 / 10200. > > > >>>> > > > >>>> 2. There are LVGL screen problems reported. This may be solved > with > > > >>>> LVGL 9.2.1 release that should show up within days and its > inclusion > > > >>>> is in the PRs. Or we have display driver to fix. I would also > > > >>>> recommend testing with previous NuttX releases on the same > hardware > > to > > > >>>> confirm the possible regression. Gabor is very keen to NuttX and > it > > > >>>> would be really nice to show working demo of LVGL 9.2.1 on 12.7.0 > > also > > > >>>> to attract newcomers to the project. > > > >>>> > > > >>>> https://github.com/apache/nuttx/issues/13825 > > > >>>> https://github.com/lvgl/lvgl/pull/6981 > > > >>>> > > > >>>> 3. I have found a problem on ESP32 with esptool version 4.7 that > > > >>>> produces faulty unusable firmware with no warning / error. I > found a > > > >>>> commit that bumps esptool to 4.8 in order to build on CI with new > > > >>>> bootloader from ESP IDF. Otherwise I would not know why it does > not > > > >>>> run. But we should handle this situation with error message and/or > > use > > > >>>> older bootloader with 4.7 (?) otherwise people may get discouraged > > at > > > >>>> first contact with NuttX. > > > >>>> > > > >>>> https://github.com/apache/nuttx/issues/13824 > > > >>>> > > > >>>> > > > >>>> If there is any reason the 12.7.0 really should be released right > > now > > > >>>> for some serious reason I can change my vote to 0 not to block the > > > >>>> release. Otherwise we should focus on fixing those 3 discovered > > issues > > > >>>> in order to provide high quality no-surprises release :-) > > > >>>> > > > >>>> > > > >>>> Here returns the subject of distributed testing farms so we could > > test > > > >>>> NuttX builds locally on a real hardware that we have at hand. I > > > >>>> started building one. But we also need some scripts that will make > > > >>>> this task easy to setup by everyone interested in a repeatable > way. > > > >>>> This is a separate discussion already taking place on dev@. > > > >>>> > > > >>>> > > > >>>> I have contacted local STM in Poland and asked if they can provide > > > >>>> free sample develkits to test NuttX on them and demo a reference > > > >>>> design. I have STM32F769I-DISCO but with no LCD so I cannot help > > with > > > >>>> LVGL at this point sorry. > > > >>>> > > > >>>> Thank you :-) > > > >>>> Tomek > > > >>>> > > > >>>> > > > >>>> === BUILD HOST === > > > >>>> > > > >>>> % uname -a > > > >>>> FreeBSD octagon 13.3-RELEASE-p7 FreeBSD 13.3-RELEASE-p7 GENERIC > > amd64 > > > >>>> > > > >>>> % git branch > > > >>>> * (HEAD detached at nuttx-12.7.0-RC0) > > > >>>> > > > >>>> % git log --oneline -5 > > > >>>> 10e44f8915 (HEAD, tag: nuttx-12.7.0-RC0, origin/releases/12.7) > > > >>>> riscv_fork.c: Fix race condition when handling parent integer > > > >>>> registers > > > >>>> 2d3c94411b riscv_fork.c: Fix vfork() for kernel mode + SMP > > > >>>> d1fec65e1b riscv: use g_running_task store current regs > > > >>>> 57f84aaca8 sensor: Added 6dof motion and gesture related types. > For > > > >>>> details, see: > > > >>>> > > > >> > > > https://developer.android.com/reference/android/hardware/SensorEvent#values > > > >>>> a4e90b7268 > > > >>>> < > > > >> > > > https://developer.android.com/reference/android/hardware/SensorEvent#valuesa4e90b7268 > > > >>> > > > >>>> inlclude/uorb.h:Update data types to be sorted by macro > definition. > > > >>>> > > > >>>> % git branch > > > >>>> * (HEAD detached at nuttx-12.7.0-RC0) > > > >>>> > > > >>>> % git log --oneline -5 > > > >>>> ac11e3cba (HEAD, tag: nuttx-12.7.0-RC0, origin/releases/12.7) > Adapt > > > >>>> the new header file path of va_format. > > > >>>> b4d794cbd Makefile:complete missing DEPPATH > > > >>>> f81a09428 nshlib: add support for pkill command > > > >>>> 767c8ea6c uorb: enable O_CLOEXEC explicit > > > >>>> bae15dfd5 nshlib: enable O_CLOEXEC explicit to avoid potential fd > > leak > > > >>>> > > > >>>> > > > >>>> === TARGETS === > > > >>>> > > > >>>> 1. ESP32 (FAIL). > > > >>>> 2. ESP32-C3 (PASS). > > > >>>> 3. STM32F769I-DISCO (PASS). > > > >>>> > > > >>>> > > > >>>> > > > >>>> === ESP32 === > > > >>>> > > > >>>> % gmake clean distclean > > > >>>> > > > >>>> % xtensa-esp32-elf-cc --version > > > >>>> xtensa-esp32-elf-cc (crosstool-NG esp-2021r2-patch5) 8.4.0 > > > >>>> Copyright (C) 2018 Free Software Foundation, Inc. > > > >>>> This is free software; see the source for copying conditions. > > There is > > > >> NO > > > >>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > > > >> PURPOSE. > > > >>>> > > > >>>> % /usr/bin/time -h ./tools/configure.sh -B esp32-devkitc:nsh > > > >>>> 3,92s real 1,98s user 2,23s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 > > > >>>> /usr/bin/time -h gmake -j8 > > > >>>> Create version.h > > > >>>> Cloning Espressif HAL for 3rd Party Platforms > > > >>>> Clone: chip/esp-hal-3rdparty LN: platform/board to > > > >>>> /XXX/nuttx-apps.git/platform/dummy > > > >>>> Register: nsh > > > >>>> Register: sh > > > >>>> Espressif HAL for 3rd Party Platforms: > > > >>>> 20690e67695f0a8170a19ec99e2e9a13b620e94d > > > >>>> CPP: > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld-> > > > >>>> > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld.tmpLD: > > > >>>> nuttx > > > >>>> CP: nuttx.hex > > > >>>> MKIMAGE: ESP32 binary > > > >>>> esptool.py -c esp32 elf2image --ram-only-header -fs 4MB -fm dio > -ff > > > >>>> 40m -o nuttx.bin nuttx > > > >>>> usage: esptool [-h] [--chip > > > >>>> > > > >>>> > > > >> > > > {auto,esp8266,esp32,esp32s2,esp32s3beta2,esp32s3,esp32c3,esp32c6beta,esp32h2beta1,esp32h2beta2,esp32c2,esp32c6}] > > > >>>> [--port PORT] [--baud BAUD] [--before > > > >>>> {default_reset,usb_reset,no_reset,no_reset_no_sync}] [--after > > > >>>> {hard_reset,soft_reset,no_reset,no_reset_stub}] [--no-stub] > > [--trace] > > > >>>> [--override-vddsdio [{1.8V,1.9V,OFF}]] > > > >>>> [--connect-attempts CONNECT_ATTEMPTS] > > > >>>> > > > >>>> > > > >> > > > {load_ram,dump_mem,read_mem,write_mem,write_flash,run,image_info,make_image,elf2image,read_mac,chip_id,flash_id,read_flash_status,write_flash_status,read_flash,verify_flash,erase_flash,erase_region,merge_bin,get_security_info,version} > > > >>>> ... > > > >>>> esptool: error: unrecognized arguments: --ram-only-header > > > >>>> gmake: *** [tools/Unix.mk:558: nuttx] Error 2 > > > >>>> 40,96s real 1m32,23s user 1m1,82s sys > > > >>>> > > > >>>> % pip show esptool > > > >>>> Name: esptool > > > >>>> Version: 4.3 > > > >>>> Summary: A serial utility to communicate & flash code to Espressif > > > >> chips. > > > >>>> Home-page: https://github.com/espressif/esptool/ > > > >>>> Author: Fredrik Ahlberg (themadinventor) & Angus Gratton > > (projectgus) > > > >>>> & Espressif Systems > > > >>>> Author-email: > > > >>>> License: GPLv2+ > > > >>>> Location: /XXX/venv3.9embedded/lib/python3.9/site-packages > > > >>>> Requires: bitstring, cryptography, ecdsa, pyserial, reedsolo > > > >>>> Required-by: #N/A > > > >>>> > > > >>>> (venv3.9embedded) pip install -U esptool > > > >>>> > > > >>>> (venv3.9embedded) /usr/bin/time -h gmake -j8 > > > >>>> CPP: > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld-> > > > >>>> > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld.tmpLD: > > > >>>> nuttx > > > >>>> CP: nuttx.hex > > > >>>> MKIMAGE: ESP32 binary > > > >>>> esptool.py -c esp32 elf2image --ram-only-header -fs 4MB -fm dio > -ff > > > >>>> 40m -o nuttx.bin nuttx > > > >>>> esptool.py v4.8.1 > > > >>>> Creating esp32 image... > > > >>>> Image has only RAM segments visible. ROM segments are hidden and > > > >>>> SHA256 digest is not appended. > > > >>>> Merged 1 ELF section > > > >>>> Successfully created esp32 image. > > > >>>> Generated: nuttx.bin > > > >>>> 4,19s real 2,96s user 3,44s sys > > > >>>> > > > >>>> (venv3.9embedded) /usr/bin/time -h gmake flash > > > >>>> 15,26s real 3,03s user 3,24s sys > > > >>>> > > > >>>> (venv3.9embedded) cu -l /dev/cuaU0 -s 115200 > > > >>>> Stale lock on cuaU0 PID=4016... overriding. > > > >>>> Connected > > > >>>> ts Jul 29 2019 12:21:46 > > > >>>> > > > >>>> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) > > > >>>> configsip: 0, SPIWP:0xee > > > >>>> > > clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 > > > >>>> mode:DIO, clock div:2 > > > >>>> load:0x3ffb1f40,len:1388 > > > >>>> ho 0 tail 12 room 4 > > > >>>> load:0x40080000,len:20320 > > > >>>> entry 0x40082650 > > > >>>> *** Booting NuttX *** > > > >>>> dram: lma 0x00001020 vma 0x3ffb1f40 len 0x56c (1388) > > > >>>> iram: lma 0x00001594 vma 0x40080000 len 0x4f60 (20320) > > > >>>> padd: lma 0x00006508 vma 0x00000000 len 0x9af0 (39664) > > > >>>> imap: lma 0x00010000 vma 0x400e0000 len 0x10d78 (68984) > > > >>>> padd: lma 0x00020d80 vma 0x00000000 len 0xf298 (62104) > > > >>>> dmap: lma 0x00030020 vma 0x3f400020 len 0x2848 (10312) > > > >>>> total segments stored 6 > > > >>>> > > > >>>> NuttShell (NSH) NuttX-12.7.0 > > > >>>> nsh> uname -a > > > >>>> NuttX 12.7.0 10e44f8915-dirty Oct 4 2024 22:22:13 xtensa > > esp32-devkitc > > > >>>> nsh> free > > > >>>> total used free maxused maxfree > > nused > > > >>>> nfree > > > >>>> Umem: 323568 6424 317144 6800 186696 > > 22 > > > >>>> 3 > > > >>>> > > > >>>> > > > >>>> I found problem with esptool 4.7.0 (system wide on FreeBSD) no > error > > > >>>> is found, firmware is built and flashed, but no NSH prompt shows > up > > > >>>> :-( > > > >>>> > > > >>>> > > > >>>> % gmake clean distclean > > > >>>> > > > >>>> > > > >>>> % /usr/bin/time -h ./tools/configure.sh -B esp32-devkitc:nsh > > > >>>> 3,89s real 1,77s user 2,41s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 > > > >>>> Create version.h > > > >>>> Cloning Espressif HAL for 3rd Party Platforms > > > >>>> Clone: chip/esp-hal-3rdparty LN: platform/board to > > > >>>> /XXX/nuttx-apps.git/platform/dummy > > > >>>> Register: nsh > > > >>>> Register: sh > > > >>>> Espressif HAL for 3rd Party Platforms: > > > >>>> 20690e67695f0a8170a19ec99e2e9a13b620e94d > > > >>>> CPP: > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld-> > > > >>>> > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld.tmp > > > >>>> LD: nuttx > > > >>>> CP: nuttx.hex > > > >>>> MKIMAGE: ESP32 binary > > > >>>> esptool.py -c esp32 elf2image --ram-only-header -fs 4MB -fm dio > -ff > > > >>>> 40m -o nuttx.bin nuttx > > > >>>> esptool.py v4.7.0 > > > >>>> Creating esp32 image... > > > >>>> ROM segments hidden - only RAM segments are visible to the ROM > > loader! > > > >>>> Merged 1 ELF section > > > >>>> Successfully created esp32 image. > > > >>>> Generated: nuttx.bin > > > >>>> 39,74s real 1m31,54s user 1m2,00s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake flash > > > >>>> CPP: > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld-> > > > >>>> > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld.tmpLD: > > > >>>> nuttx > > > >>>> CP: nuttx.hex > > > >>>> MKIMAGE: ESP32 binary > > > >>>> esptool.py -c esp32 elf2image --ram-only-header -fs 4MB -fm dio > -ff > > > >>>> 40m -o nuttx.bin nuttx > > > >>>> esptool.py v4.7.0 > > > >>>> Creating esp32 image... > > > >>>> ROM segments hidden - only RAM segments are visible to the ROM > > loader! > > > >>>> Merged 1 ELF section > > > >>>> Successfully created esp32 image. > > > >>>> Generated: nuttx.bin > > > >>>> esptool.py -c esp32 -p /dev/cuaU0 -b 115200 write_flash -fs > detect > > > >>>> -fm dio -ff 40m 0x1000 nuttx.bin > > > >>>> esptool.py v4.7.0 > > > >>>> Serial port /dev/cuaU0 > > > >>>> Connecting......... > > > >>>> Chip is ESP32-D0WD-V3 (revision v3.0) > > > >>>> Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, > > > >>>> Coding Scheme None > > > >>>> Crystal is 40MHz > > > >>>> MAC: 8c:4b:14:81:0b:ec > > > >>>> Uploading stub... > > > >>>> Running stub... > > > >>>> Stub running... > > > >>>> Configuring flash size... > > > >>>> Auto-detected Flash size: 4MB > > > >>>> Flash will be erased from 0x00001000 to 0x00033fff... > > > >>>> Compressed 206984 bytes to 72429... > > > >>>> Wrote 206984 bytes (72429 compressed) at 0x00001000 in 6.7 seconds > > > >>>> (effective 247.0 kbit/s)... > > > >>>> Hash of data verified. > > > >>>> > > > >>>> Leaving... > > > >>>> Hard resetting via RTS pin... > > > >>>> 15,25s real 3,07s user 3,17s sys > > > >>>> > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> Connected > > > >>>> ets Jul 29 2019 12:21:46 > > > >>>> > > > >>>> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) > > > >>>> configsip: 0, SPIWP:0xee > > > >>>> > > clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 > > > >>>> mode:DIO, clock div:2 > > > >>>> load:0x3ffb1f40,len:1388 > > > >>>> ho 0 tail 12 room 4 > > > >>>> load:0x40080000,len:20320 > > > >>>> entry 0x40082650 > > > >>>> *** Booting NuttX *** > > > >>>> dram: lma 0x00001020 vma 0x3ffb1f40 len 0x56c (1388) > > > >>>> iram: lma 0x00001594 vma 0x40080000 len 0x4f60 (20320) > > > >>>> padd: lma 0x00006508 vma 0x00000000 len 0xaaf0 (43760) > > > >>>> imap: lma 0x00011000 vma 0x400e0000 len 0x10d78 (68984) > > > >>>> padd: lma 0x00021d80 vma 0x00000000 len 0xf298 (62104) > > > >>>> dmap: lma 0x00031020 vma 0x3f400020 len 0x2848 (10312) > > > >>>> total segments stored 6 > > > >>>> > > > >>>>>>> NO NSH HERE DEVICE HANGS <<< > > > >>>> > > > >>>> > > > >>>> Lets try with the CoreMark: > > > >>>> > > > >>>> % gmake clean distclean > > > >>>> > > > >>>> % /usr/bin/time -h ./tools/configure.sh -B esp32-devkitc:coremark > > > >>>> 3,93s real 1,73s user 2,46s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 > > > >>>> 42,46s real 1m35,59s user 1m0,58s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake flash > > > >>>> 13,78s real 2,69s user 2,63s sys > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> Connected > > > >>>> ets Jul 29 2019 12:21:46 > > > >>>> > > > >>>> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) > > > >>>> configsip: 0, SPIWP:0xee > > > >>>> > > clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 > > > >>>> mode:DIO, clock div:2 > > > >>>> load:0x3ffb30a0,len:2016 > > > >>>> load:0x40080000,len:30100 > > > >>>> entry 0x40083940 > > > >>>> *** Booting NuttX *** > > > >>>> dram: lma 0x00001020 vma 0x3ffb30a0 len 0x7e0 (2016) > > > >>>> iram: lma 0x00001808 vma 0x40080000 len 0x7594 (30100) > > > >>>> padd: lma 0x00008da8 vma 0x00000000 len 0x8250 (33360) > > > >>>> imap: lma 0x00011000 vma 0x400e0000 len 0xde14 (56852) > > > >>>> padd: lma 0x0001ee1c vma 0x00000000 len 0x21fc (8700) > > > >>>> dmap: lma 0x00021020 vma 0x3f400020 len 0x14fc (5372) > > > >>>> total segments stored 6 > > > >>>> > > > >>>>>>> COREMARK DOES NOT RUN <<< > > > >>>> > > > >>>> > > > >>>> Looks like default Python switched from 3.9 to 3.11. Reinstalled > > > >>>> py311-esptool system package. > > > >>>> > > > >>>> % gmake clean distclean > > > >>>> > > > >>>> % /usr/bin/time -h ./tools/configure.sh -B esp32-devkitc:coremark > > > >>>> 3,91s real 1,90s user 2,30s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 > > > >>>> Create version.h > > > >>>> Cloning Espressif HAL for 3rd Party Platforms > > > >>>> Clone: chip/esp-hal-3rdparty LN: platform/board to > > > >>>> /XXX/nuttx-apps.git/platform/dummy > > > >>>> Downloading: https://github.com/eembc/coremark/archive/main.zip > > > >>>> % Total % Received % Xferd Average Speed Time Time > Time > > > >>>> Current > > > >>>> Dload Upload Total Spent > Left > > > >>>> Speed > > > >>>> 0 0 0 0 0 0 0 0 --:--:-- --:--:-- > > --:--:-- > > > >>>> 0 > > > >>>> 100 475k 0 475k 0 0 621k 0 --:--:-- --:--:-- > > --:--:-- > > > >>>> 621k > > > >>>> Unpacking: main.zip -> coremark > > > >>>> Hmm... Looks like a unified diff to me... > > > >>>> The text leading up to this was: > > > >>>> -------------------------- > > > >>>> |--- coremark/posix/core_portme.c > > > >>>> |+++ coremark/posix/core_portme.c > > > >>>> -------------------------- > > > >>>> Patching file coremark/posix/core_portme.c using Plan A... > > > >>>> Hunk #1 succeeded at 208. > > > >>>> done > > > >>>> Register: coremark > > > >>>> Espressif HAL for 3rd Party Platforms: > > > >>>> 20690e67695f0a8170a19ec99e2e9a13b620e94d > > > >>>> CPP: > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld-> > > > >>>> > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld.tmpLD: > > > >>>> nuttx > > > >>>> CP: nuttx.hex > > > >>>> MKIMAGE: ESP32 binary > > > >>>> esptool.py -c esp32 elf2image --ram-only-header -fs 4MB -fm dio > -ff > > > >>>> 40m -o nuttx.bin nuttx > > > >>>> esptool.py v4.7.0 > > > >>>> Creating esp32 image... > > > >>>> ROM segments hidden - only RAM segments are visible to the ROM > > loader! > > > >>>> Merged 1 ELF section > > > >>>> Successfully created esp32 image. > > > >>>> Generated: nuttx.bin > > > >>>> 39,75s real 1m34,74s user 1m0,86s sys > > > >>>> > > > >>>> > > > >>>> % /usr/bin/time -h gmake flash > > > >>>> CPP: > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld-> > > > >>>> > > > >>>> > > > >> > > > /XXX/nuttx.git/arch/xtensa/src/chip/esp-hal-3rdparty/components/esp_rom/esp32/ld/esp32.rom.newlib-funcs.ld.tmpLD: > > > >>>> nuttx > > > >>>> CP: nuttx.hex > > > >>>> MKIMAGE: ESP32 binary > > > >>>> esptool.py -c esp32 elf2image --ram-only-header -fs 4MB -fm dio > -ff > > > >>>> 40m -o nuttx.bin nuttx > > > >>>> esptool.py v4.7.0 > > > >>>> Creating esp32 image... > > > >>>> ROM segments hidden - only RAM segments are visible to the ROM > > loader! > > > >>>> Merged 1 ELF section > > > >>>> Successfully created esp32 image. > > > >>>> Generated: nuttx.bin > > > >>>> esptool.py -c esp32 -p /dev/cuaU0 -b 115200 write_flash -fs > detect > > > >>>> -fm dio -ff 40m 0x1000 nuttx.bin > > > >>>> esptool.py v4.7.0 > > > >>>> Serial port /dev/cuaU0 > > > >>>> Connecting.......... > > > >>>> Chip is ESP32-D0WD-V3 (revision v3.0) > > > >>>> Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, > > > >>>> Coding Scheme None > > > >>>> Crystal is 40MHz > > > >>>> MAC: 8c:4b:14:81:0b:ec > > > >>>> Uploading stub... > > > >>>> Running stub... > > > >>>> Stub running... > > > >>>> Configuring flash size... > > > >>>> Auto-detected Flash size: 4MB > > > >>>> Flash will be erased from 0x00001000 to 0x00022fff... > > > >>>> Compressed 136508 bytes to 66615... > > > >>>> Wrote 136508 bytes (66615 compressed) at 0x00001000 in 6.0 seconds > > > >>>> (effective 183.4 kbit/s)... > > > >>>> Hash of data verified. > > > >>>> > > > >>>> Leaving... > > > >>>> Hard resetting via RTS pin... > > > >>>> 13,63s real 2,50s user 2,81s sys > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> Connected > > > >>>> ts Jul 29 2019 12:21:46 > > > >>>> > > > >>>> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) > > > >>>> configsip: 0, SPIWP:0xee > > > >>>> > > clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 > > > >>>> mode:DIO, clock div:2 > > > >>>> load:0x3ffb30a0,len:2016 > > > >>>> load:0x40080000,len:30100 > > > >>>> entry 0x40083940 > > > >>>> *** Booting NuttX *** > > > >>>> dram: lma 0x00001020 vma 0x3ffb30a0 len 0x7e0 (2016) > > > >>>> iram: lma 0x00001808 vma 0x40080000 len 0x7594 (30100) > > > >>>> padd: lma 0x00008da8 vma 0x00000000 len 0x8250 (33360) > > > >>>> imap: lma 0x00011000 vma 0x400e0000 len 0xde14 (56852) > > > >>>> padd: lma 0x0001ee1c vma 0x00000000 len 0x21fc (8700) > > > >>>> dmap: lma 0x00021020 vma 0x3f400020 len 0x14fc (5372) > > > >>>> total segments stored 6 > > > >>>> > > > >>>>>>> COREMARK DOES NOT RUN HERE TOO <<< > > > >>>> > > > >>>> > > > >>>> Looking at the history this commit seems to enforce esptool 4.8 to > > fix > > > >>>> the CI builds, but our build system for ESP32 does not check or > > alert > > > >>>> if previous versions are present thus building faulty firmware > with > > no > > > >>>> error! > > > >>>> > > > >>>> commit 457f9d3dce45affd5f26da9d6369494709ff2314 > > > >>>> Author: Almir Okato <almir.ok...@espressif.com> > > > >>>> Date: Thu Jul 4 11:46:00 2024 +0200 > > > >>>> > > > >>>> ci: update required esptool version to 4.8.dev4 > > > >>>> > > > >>>> This esptool version is required when building the > > > >>>> default Simple Boot for Espressif chips. > > > >>>> > > > >>>> Signed-off-by: Almir Okato <almir.ok...@espressif.com> > > > >>>> > > > >>>> > > > >>>> > > > >>>> > > > >>>> > > > >>>> > > > >>>> === ESP32-C3 === > > > >>>> > > > >>>> % riscv32-esp-elf-gcc -v > > > >>>> Using built-in specs. > > > >>>> COLLECT_GCC=riscv32-esp-elf-gcc > > > >>>> > > > >>>> > > > >> > > > COLLECT_LTO_WRAPPER=/XXX/.espressif/tools/riscv32-esp-elf/esp-2021r2-patch5-8.4.0/riscv32-esp-elf/bin/../libexec/gcc/riscv32-esp-elf/8.4.0/lto-wrapper > > > >>>> Target: riscv32-esp-elf > > > >>>> Configured with: > > > >>>> /builds/idf/crosstool-NG/.build/riscv32-esp-elf/src/gcc/configure > > > >>>> --build=x86_64-build_pc-linux-gnu --host=x86_64-build_pc-linux-gnu > > > >>>> --target=riscv32-esp-elf > > > >>>> --prefix=/builds/idf/crosstool-NG/builds/riscv32-esp-elf > > > >>>> --exec_prefix=/builds/idf/crosstool-NG/builds/riscv32-esp-elf > > > >>>> > > > >>>> > > > >> > > > --with-local-prefix=/builds/idf/crosstool-NG/builds/riscv32-esp-elf/riscv32-esp-elf > > > >>>> > > > >>>> > > > >> > > > --with-headers=/builds/idf/crosstool-NG/builds/riscv32-esp-elf/riscv32-esp-elf/include > > > >>>> --with-newlib --enable-threads=no --disable-shared > > --with-arch=rv32gc > > > >>>> --with-abi=ilp32 --with-pkgversion='crosstool-NG > esp-2021r2-patch5' > > > >>>> --disable-__cxa_atexit --enable-cxx-flags=-ffunction-sections > > > >>>> --disable-libgomp --disable-libmudflap --disable-libmpx > > > >>>> --disable-libssp --disable-libquadmath > --disable-libquadmath-support > > > >>>> --disable-libstdcxx-verbose > > > >>>> > > --with-gmp=/builds/idf/crosstool-NG/.build/riscv32-esp-elf/buildtools > > > >>>> > > --with-mpfr=/builds/idf/crosstool-NG/.build/riscv32-esp-elf/buildtools > > > >>>> > > --with-mpc=/builds/idf/crosstool-NG/.build/riscv32-esp-elf/buildtools > > > >>>> > > --with-isl=/builds/idf/crosstool-NG/.build/riscv32-esp-elf/buildtools > > > >>>> --enable-lto --enable-target-optspace --without-long-double-128 > > > >>>> --disable-nls --enable-multiarch --enable-languages=c,c++ > > > >>>> --disable-libstdcxx-verbose --enable-threads=posix > > > >>>> --enable-gcov-custom-rtio --enable-libstdcxx-time=yes > > > >>>> Thread model: posix > > > >>>> gcc version 8.4.0 (crosstool-NG esp-2021r2-patch5) > > > >>>> > > > >>>> > > > >>>> % gmake clean distclean > > > >>>> > > > >>>> % /usr/bin/time -h ./tools/configure.sh -B esp32c3-devkit:nsh > > > >>>> 4,07s real 1,86s user 2,38s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 CROSSDEV=riscv32-esp-elf- > > > >>>> Create version.h > > > >>>> LN: platform/board to /XXX/nuttx-apps.git/platform/dummy > > > >>>> Register: nsh > > > >>>> Register: sh > > > >>>> Register: dumpstack > > > >>>> LD: nuttx > > > >>>> CP: nuttx.hex > > > >>>> MKIMAGE: ESP32-C3 binary > > > >>>> esptool.py -c esp32c3 elf2image -fs 4MB -fm dio -ff 40m -o > nuttx.bin > > > >> nuttx > > > >>>> esptool.py v4.7.0 > > > >>>> Creating esp32c3 image... > > > >>>> Merged 1 ELF section > > > >>>> Successfully created esp32c3 image. > > > >>>> Generated: nuttx.bin (ESP32-C3 compatible) > > > >>>> 34,55s real 1m18,50s user 59,23s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake flash CROSSDEV=riscv32-esp-elf- > > > >>>> LD: nuttx > > > >>>> CP: nuttx.hex > > > >>>> MKIMAGE: ESP32-C3 binary > > > >>>> esptool.py -c esp32c3 elf2image -fs 4MB -fm dio -ff 40m -o > nuttx.bin > > > >> nuttx > > > >>>> esptool.py v4.7.0 > > > >>>> Creating esp32c3 image... > > > >>>> Merged 1 ELF section > > > >>>> Successfully created esp32c3 image. > > > >>>> Generated: nuttx.bin (ESP32-C3 compatible) > > > >>>> esptool.py -c esp32c3 -p /dev/cuaU0 -b 115200 write_flash -fs > 4MB > > > >>>> -fm dio -ff 40m 0x10000 nuttx.bin > > > >>>> esptool.py v4.7.0 > > > >>>> Serial port /dev/cuaU0 > > > >>>> Connecting......... > > > >>>> Chip is ESP32-C3 (QFN32) (revision v0.3) > > > >>>> Features: WiFi, BLE > > > >>>> Crystal is 40MHz > > > >>>> MAC: 7c:df:a1:b1:58:00 > > > >>>> Uploading stub... > > > >>>> Running stub... > > > >>>> Stub running... > > > >>>> Configuring flash size... > > > >>>> Flash will be erased from 0x00010000 to 0x00035fff... > > > >>>> Compressed 155424 bytes to 69417... > > > >>>> Wrote 155424 bytes (69417 compressed) at 0x00010000 in 6.3 seconds > > > >>>> (effective 198.2 kbit/s)... > > > >>>> Hash of data verified. > > > >>>> > > > >>>> Leaving... > > > >>>> Hard resetting via RTS pin... > > > >>>> 22,98s real 6,66s user 11,54s sys > > > >>>> > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> Connected > > > >>>> ESP-ROM:esp32c3-api1-20210207 > > > >>>> Build:Feb 7 2021 > > > >>>> rst:0x1 (POWERON),boot:0xc (SPI_FAST_FLASH_BOOT) > > > >>>> SPIWP:0xee > > > >>>> mode:DIO, clock div:1 > > > >>>> load:0x3fcd5820,len:0x16c0 > > > >>>> load:0x403cc710,len:0x87c > > > >>>> load:0x403ce710,len:0x2f54 > > > >>>> entry 0x403cc710 > > > >>>> I (30) boot: ESP-IDF v5.1-dev-3972-g1559b6309f 2nd stage > bootloader > > > >>>> I (30) boot: compile time Mar 15 2023 12:14:06 > > > >>>> I (31) boot: chip revision: v0.3 > > > >>>> I (35) boot.esp32c3: SPI Speed : 80MHz > > > >>>> I (40) boot.esp32c3: SPI Mode : DIO > > > >>>> I (44) boot.esp32c3: SPI Flash Size : 4MB > > > >>>> I (49) boot: Enabling RNG early entropy source... > > > >>>> I (54) boot: Partition Table: > > > >>>> I (58) boot: ## Label Usage Type ST Offset > > Length > > > >>>> I (65) boot: 0 factory factory app 00 00 00010000 > > > >> 00100000 > > > >>>> I (73) boot: End of partition table > > > >>>> I (77) esp_image: segment 0: paddr=00010020 vaddr=3c020020 > > size=039a0h > > > >>>> ( 14752) map > > > >>>> I (88) esp_image: segment 1: paddr=000139c8 vaddr=3fc81a70 > > size=00200h > > > >>>> ( 512) load > > > >>>> I (94) esp_image: segment 2: paddr=00013bd0 vaddr=40380000 > > size=01a64h > > > >>>> ( 6756) load > > > >>>> I (103) esp_image: segment 3: paddr=0001563c vaddr=00000000 > > size=0aabch > > > >> ( > > > >>>> 43708) > > > >>>> I (117) esp_image: segment 4: paddr=00020100 vaddr=42000100 > > > >>>> size=15df8h ( 89592) map > > > >>>> I (133) boot: Loaded app from partition at offset 0x10000 > > > >>>> I (133) boot: Disabling RNG early entropy source... > > > >>>> > > > >>>> NuttShell (NSH) NuttX-12.7.0 > > > >>>> nsh> uname -a > > > >>>> NuttX 12.7.0 10e44f8915-dirty Oct 4 2024 23:04:21 risc-v > > esp32c3-devkit > > > >>>> nsh> free > > > >>>> total used free maxused maxfree > > nused > > > >>>> nfree > > > >>>> Umem: 373820 5364 368456 5720 368456 > > 19 > > > >>>> 1 > > > >>>> > > > >>>> > > > >>>> % gmake clean distclean CROSSDEV=riscv32-esp-elf- > > > >>>> > > > >>>> % /usr/bin/time -h ./tools/configure.sh -B esp32c3-devkit:coremark > > > >>>> 3,97s real 2,16s user 2,09s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 CROSSDEV=riscv32-esp-elf- > > > >>>> 32,35s real 1m11,61s user 55,55s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake flash CROSSDEV=riscv32-esp-elf- > > > >>>> 20,03s real 5,94s user 11,38s sys > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> Connected > > > >>>> ESP-ROM:esp32c3-api1-20210207 > > > >>>> Build:Feb 7 2021 > > > >>>> rst:0x1 (POWERON),boot:0xc (SPI_FAST_FLASH_BOOT) > > > >>>> SPIWP:0xee > > > >>>> mode:DIO, clock div:1 > > > >>>> load:0x3fcd5820,len:0x16c0 > > > >>>> load:0x403cc710,len:0x87c > > > >>>> load:0x403ce710,len:0x2f54 > > > >>>> entry 0x403cc710 > > > >>>> I (30) boot: ESP-IDF v5.1-dev-3972-g1559b6309f 2nd stage > bootloader > > > >>>> I (30) boot: compile time Mar 15 2023 12:14:06 > > > >>>> I (31) boot: chip revision: v0.3 > > > >>>> I (35) boot.esp32c3: SPI Speed : 80MHz > > > >>>> I (40) boot.esp32c3: SPI Mode : DIO > > > >>>> I (44) boot.esp32c3: SPI Flash Size : 4MB > > > >>>> I (49) boot: Enabling RNG early entropy source... > > > >>>> I (54) boot: Partition Table: > > > >>>> I (58) boot: ## Label Usage Type ST Offset > > Length > > > >>>> I (65) boot: 0 factory factory app 00 00 00010000 > > > >> 00100000 > > > >>>> I (73) boot: End of partition table > > > >>>> I (77) esp_image: segment 0: paddr=00010020 vaddr=3c010020 > > size=00bd0h > > > >>>> ( 3024) map > > > >>>> I (86) esp_image: segment 1: paddr=00010bf8 vaddr=3fc81e10 > > size=0015ch > > > >>>> ( 348) load > > > >>>> I (94) esp_image: segment 2: paddr=00010d5c vaddr=40380000 > > size=01e0ch > > > >>>> ( 7692) load > > > >>>> I (104) esp_image: segment 3: paddr=00012b70 vaddr=00000000 > > size=0d588h > > > >> ( > > > >>>> 54664) > > > >>>> I (119) esp_image: segment 4: paddr=00020100 vaddr=42000100 > > > >>>> size=0db60h ( 56160) map > > > >>>> I (128) boot: Loaded app from partition at offset 0x10000 > > > >>>> I (128) boot: Disabling RNG early entropy source... > > > >>>> Running CoreMark... > > > >>>> 2K performance run parameters for coremark. > > > >>>> CoreMark Size : 666 > > > >>>> Total ticks : 1472 > > > >>>> Total time (secs): 14.720000 > > > >>>> Iterations/Sec : 407.608696 > > > >>>> Iterations : 6000 > > > >>>> Compiler version : GCC8.4.0 > > > >>>> Compiler flags : -O3 -fno-strict-aliasing -fomit-frame-pointer > > > >>>> -ffunction-sections -fdata-sections -nostdlib > > > >>>> Memory location : HEAP > > > >>>> seedcrc : 0xe9f5 > > > >>>> [0]crclist : 0xe714 > > > >>>> [0]crcmatrix : 0x1fd7 > > > >>>> [0]crcstate : 0x8e3a > > > >>>> [0]crcfinal : 0xa14c > > > >>>> Correct operation validated. See README.md for run and reporting > > rules. > > > >>>> CoreMark 1.0 : 407.608696 / GCC8.4.0 -O3 -fno-strict-aliasing > > > >>>> -fomit-frame-pointer -ffunction-sections -fdata-sections > -nostdlib / > > > >>>> HEAP > > > >>>> > > > >>>> % gmake clean distclean CROSSDEV=riscv32-esp-elf- > > > >>>> > > > >>>> > > > >>>> > > > >>>> > > > >>>> > > > >>>> > > > >>>> === STM32F769I-DISCO === > > > >>>> > > > >>>> This is my first play with NuttX on that board.. I can also verify > > > >>>> flashing instructions :-) > > > >>>> > > > >>>> % arm-none-eabi-gcc --version > > > >>>> arm-none-eabi-gcc (GNU Arm Embedded Toolchain ) 10.3.1 20210824 > > > >> (release) > > > >>>> Copyright (C) 2020 Free Software Foundation, Inc. > > > >>>> This is free software; see the source for copying conditions. > > There is > > > >> NO > > > >>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR > > > >> PURPOSE. > > > >>>> > > > >>>> % ./tools/configure.sh -B stm32f769i-disco:nsh > > > >>>> 4,14s real 1,98s user 2,46s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 > > > >>>> 40,20s real 3m14,54s user 39,11s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake flash > > > >>>> LD: nuttx > > > >>>> CP: nuttx.hex > > > >>>> CP: nuttx.bin > > > >>>> 5,02s real 2,51s user 2,82s sys > > > >>>> > > > >>>> % openocd -f interface/stlink.cfg -f target/stm32f7x.cfg -c > > 'program > > > >>>> nuttx.bin 0x08000000; reset run; exit' > > > >>>> Open On-Chip Debugger 0.12.0 > > > >>>> Licensed under GNU GPL v2 > > > >>>> For bug reports, read > > > >>>> http://openocd.org/doc/doxygen/bugs.html > > > >>>> Info : auto-selecting first available session transport "hla_swd". > > To > > > >>>> override use 'transport select <transport>'. > > > >>>> Info : The selected transport took over low-level target control. > > The > > > >>>> results might differ compared to plain JTAG/SWD > > > >>>> Info : clock speed 2000 kHz > > > >>>> Info : STLINK V2J27M15 (API v2) VID:PID 0483:374B > > > >>>> Info : Target voltage: 3.221551 > > > >>>> Info : [stm32f7x.cpu] Cortex-M7 r1p0 processor detected > > > >>>> Info : [stm32f7x.cpu] target has 8 breakpoints, 4 watchpoints > > > >>>> Info : starting gdb server for stm32f7x.cpu on 3333 > > > >>>> Info : Listening on port 3333 for gdb connections > > > >>>> Info : Unable to match requested speed 2000 kHz, using 1800 kHz > > > >>>> Info : Unable to match requested speed 2000 kHz, using 1800 kHz > > > >>>> [stm32f7x.cpu] halted due to debug-request, current mode: Thread > > > >>>> xPSR: 0x01000000 pc: 0x0800037c msp: 0x20021928 > > > >>>> Info : Unable to match requested speed 8000 kHz, using 4000 kHz > > > >>>> Info : Unable to match requested speed 8000 kHz, using 4000 kHz > > > >>>> ** Programming Started ** > > > >>>> Info : device id = 0x10006451 > > > >>>> Info : flash size = 2048 KiB > > > >>>> Info : Single Bank 2048 kiB STM32F76x/77x found > > > >>>> ** Programming Finished ** > > > >>>> Info : Unable to match requested speed 2000 kHz, using 1800 kHz > > > >>>> Info : Unable to match requested speed 2000 kHz, using 1800 kHz > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> Connected > > > >>>> $$$08170221053F680F3A7BF125 > > > >>>> NuttShell (NSH) NuttX-12.7.0 > > > >>>> nsh> uname -a > > > >>>> NuttX 12.7.0 10e44f8915-dirty Oct 4 2024 23:25:59 arm > > stm32f769i-disco > > > >>>> nsh> free > > > >>>> nsh: free: command not found > > > >>>> nsh> help > > > >>>> help usage: help [-v] [<cmd>] > > > >>>> > > > >>>> . cd exit mkrd sleep > unset > > > >>>> [ cp expr mount source > uptime > > > >>>> ? cmp false mv test > usleep > > > >>>> alias dirname help printf time xd > > > >>>> unalias dd hexdump pwd true > > > >>>> basename dmesg kill rm truncate > > > >>>> break echo ls rmdir uname > > > >>>> cat exec mkdir set umount > > > >>>> > > > >>>> Builtin Apps: > > > >>>> nsh sh > > > >>>> > > > >>>> > > > >>>> % gmake clean distclean > > > >>>> > > > >>>> % /usr/bin/time -h ./tools/configure.sh -B stm32f769i-disco:netnsh > > > >>>> 4,11s real 1,92s user 2,50s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 > > > >>>> 53,49s real 4m24,31s user 49,74s sys > > > >>>> > > > >>>> % /usr/bin/time -h gmake flash > > > >>>> 6,33s real 2,93s user 3,73s sys > > > >>>> > > > >>>> % openocd -f interface/stlink.cfg -f target/stm32f7x.cfg -c > > 'program > > > >>>> nuttx.bin 0x08000000; reset run; exit' > > > >>>> Open On-Chip Debugger 0.12.0 > > > >>>> Licensed under GNU GPL v2 > > > >>>> For bug reports, read > > > >>>> http://openocd.org/doc/doxygen/bugs.html > > > >>>> Info : auto-selecting first available session transport "hla_swd". > > To > > > >>>> override use 'transport select <transport>'. > > > >>>> Info : The selected transport took over low-level target control. > > The > > > >>>> results might differ compared to plain JTAG/SWD > > > >>>> Info : clock speed 2000 kHz > > > >>>> Info : STLINK V2J27M15 (API v2) VID:PID 0483:374B > > > >>>> Info : Target voltage: 3.221551 > > > >>>> Info : [stm32f7x.cpu] Cortex-M7 r1p0 processor detected > > > >>>> Info : [stm32f7x.cpu] target has 8 breakpoints, 4 watchpoints > > > >>>> Info : starting gdb server for stm32f7x.cpu on 3333 > > > >>>> Info : Listening on port 3333 for gdb connections > > > >>>> Info : Unable to match requested speed 2000 kHz, using 1800 kHz > > > >>>> Info : Unable to match requested speed 2000 kHz, using 1800 kHz > > > >>>> [stm32f7x.cpu] halted due to debug-request, current mode: Thread > > > >>>> xPSR: 0x01000000 pc: 0x0800037c msp: 0x20021928 > > > >>>> Info : Unable to match requested speed 8000 kHz, using 4000 kHz > > > >>>> Info : Unable to match requested speed 8000 kHz, using 4000 kHz > > > >>>> ** Programming Started ** > > > >>>> Info : device id = 0x10006451 > > > >>>> Info : flash size = 2048 KiB > > > >>>> Info : Single Bank 2048 kiB STM32F76x/77x found > > > >>>> ** Programming Finished ** > > > >>>> Info : Unable to match requested speed 2000 kHz, using 1800 kHz > > > >>>> Info : Unable to match requested speed 2000 kHz, using 1800 kHz > > > >>>> > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> Connected > > > >>>> $$$08170221053F680F3A7BF125 > > > >>>> NuttShell (NSH) NuttX-12.7.0 > > > >>>> No MOTD string provided > > > >>>> nsh> > > > >>>> nsh> uname -a > > > >>>> NuttX stntest 12.7.0 10e44f8915-dirty Oct 4 2024 23:32:10 arm > > > >>>> stm32f769i-disco > > > >>>> nsh> help > > > >>>> help usage: help [-v] [<cmd>] > > > >>>> > > > >>>> . cd exec kill printf time > > > >>>> [ cp exit pkill ps true > > > >>>> ? cmp expr ls pwd > > truncate > > > >>>> alias dirname false mkdir rm > uname > > > >>>> unalias dd fdinfo mkrd rmdir > umount > > > >>>> arp df free mount set > unset > > > >>>> basename dmesg help mv sleep > uptime > > > >>>> break echo hexdump nslookup source > usleep > > > >>>> cat env ifconfig pidof test xd > > > >>>> > > > >>>> Builtin Apps: > > > >>>> nsh ping renew sh > > > >>>> > > > >>>> nsh> ifconfig > > > >>>> eth0 Link encap:Ethernet HWaddr ea:db:b5:7a:ff:e4 at UP mtu > 1486 > > > >>>> inet addr:10.0.0.2 DRaddr:10.0.0.1 Mask:255.255.255.0 > > > >>>> > > > >>>> IPv4 TCP UDP ICMP > > > >>>> Received 0004 0000 0004 0000 > > > >>>> Dropped 0000 0000 0000 0000 > > > >>>> IPv4 VHL: 0000 Frg: 0000 > > > >>>> Checksum 0000 0000 0000 ---- > > > >>>> TCP ACK: 0000 SYN: 0000 > > > >>>> RST: 0000 0000 > > > >>>> Type 0000 ---- ---- 0000 > > > >>>> Sent 0000 0000 0000 0000 > > > >>>> Rexmit ---- 0000 ---- ---- > > > >>>> > > > >>>> > > > >>>> nsh> ifconfig eth0 dhcp > > > >>>>>>> HANGS, NEED RESET <<< > > > >>>> > > > >>>> nsh> renew eth0 > > > >>>>>>> HANGS, NEED RESET <<< > > > >>>> > > > >>>> nsh> ifconfig eth0 XXX.150 > > > >>>> nsh> ifconfig > > > >>>> eth0 Link encap:Ethernet HWaddr ea:db:b5:7a:ff:e4 at UP mtu > 1486 > > > >>>> inet addr:XXX.150 DRaddr:XXX.1 Mask:255.255.255.0 > > > >>>> > > > >>>> IPv4 TCP UDP ICMP > > > >>>> Received 0003 0000 0003 0000 > > > >>>> Dropped 0000 0000 0000 0000 > > > >>>> IPv4 VHL: 0000 Frg: 0000 > > > >>>> Checksum 0000 0000 0000 ---- > > > >>>> TCP ACK: 0000 SYN: 0000 > > > >>>> RST: 0000 0000 > > > >>>> Type 0000 ---- ---- 0000 > > > >>>> Sent 0000 0000 0000 0000 > > > >>>> Rexmit ---- 0000 ---- ---- > > > >>>> nsh> ping XXX.1 > > > >>>> PING XXX.1 56 bytes of data > > > >>>> 56 bytes from XXX.1: icmp_seq=0 time=0.0 ms > > > >>>> ... > > > >>>> 56 bytes from XXX.1: icmp_seq=9 time=0.0 ms > > > >>>> 10 packets transmitted, 10 received, 0% packet loss, time 10100 ms > > > >>>> rtt min/avg/max/mdev = 0.000/0.000/0.000/0.000 ms > > > >>>> > > > >>>> Okay we have a quite powerful hardware lets run some benchmarks on > > it > > > >> :-) > > > >>>> > > > >>>> BUG: Looks like SPINLOCK benchmark has broken dependencies. > > > >>>> > > > >>>> % gmake -j8 > > > >>>> LD: nuttx > > > >>>> CP: nuttx.hex > > > >>>> CP: nuttx.bin > > > >>>> octagon% gmake flash > > > >>>> LD: nuttx > > > >>>> CP: nuttx.hex > > > >>>> CP: nuttx.bin > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> > > > >>>> nsh> uname -a > > > >>>> NuttX stntest 12.7.0 10e44f8915-dirty Oct 4 2024 23:50:23 arm > > > >>>> stm32f769i-disco > > > >>>> > > > >>>> nsh> free > > > >>>> total used free maxused maxfree > > nused > > > >>>> nfree > > > >>>> Umem: 474288 10144 464144 13192 326328 > > 30 > > > >>>> 5 > > > >>>> nsh> help > > > >>>> help usage: help [-v] [<cmd>] > > > >>>> > > > >>>> . cd exec kill printf time > > > >>>> [ cp exit pkill ps true > > > >>>> ? cmp expr ls pwd > > truncate > > > >>>> alias dirname false mkdir rm > uname > > > >>>> unalias dd fdinfo mkrd rmdir > umount > > > >>>> arp df free mount set > unset > > > >>>> basename dmesg help mv sleep > uptime > > > >>>> break echo hexdump nslookup source > usleep > > > >>>> cat env ifconfig pidof test xd > > > >>>> > > > >>>> Builtin Apps: > > > >>>> coremark pi_css5 ramspeed > > > >>>> dhrystone ping renew > > > >>>> nsh radix2_big_64k sh > > > >>>> > > > >>>> nsh> coremark > > > >>>> Running CoreMark... > > > >>>> 2K performance run parameters for coremark. > > > >>>> CoreMark Size : 666 > > > >>>> Total ticks : 1772 > > > >>>> Total time (secs): 17.720000 > > > >>>> Iterations/Sec : 620.767494 > > > >>>> Iterations : 11000 > > > >>>> Compiler version : GCC10.3.1 20210824 (release) > > > >>>> Compiler flags : -Os -fno-strict-aliasing -fomit-frame-pointer > > > >>>> -fno-common -Wall -Wshadow -Wundef -ffunction-sections > > -fdata-sections > > > >>>> Memory location : HEAP > > > >>>> seedcrc : 0xe9f5 > > > >>>> [0]crclist : 0xe714 > > > >>>> [0]crcmatrix : 0x1fd7 > > > >>>> [0]crcstate : 0x8e3a > > > >>>> [0]crcfinal : 0x33ff > > > >>>> Correct operation validated. See README.md for run and reporting > > rules. > > > >>>> CoreMark 1.0 : 620.767494 / GCC10.3.1 20210824 (release) -Os > > > >>>> -fno-strict-aliasing -fomit-frame-pointer -fno-common -Wall > -Wshadow > > > >>>> -Wundef -ffunction-sections -fdata-sections / HEAP > > > >>>> > > > >>>> nsh> dhrystone > > > >>>> > > > >>>> Dhrystone Benchmark, Version C, Version 2.2 > > > >>>> Program compiled without 'register' attribute > > > >>>> Using MSC clock(), HZ=100 > > > >>>> > > > >>>> Trying 50000 runs through Dhrystone: > > > >>>> Measured time too small to obtain meaningful results > > > >>>> > > > >>>> Trying 500000 runs through Dhrystone: > > > >>>> Measured time too small to obtain meaningful results > > > >>>> > > > >>>> Trying 5000000 runs through Dhrystone: > > > >>>> Final values of the variables used in the benchmark: > > > >>>> > > > >>>> Int_Glob: 5 > > > >>>> should be: 5 > > > >>>> Bool_Glob: 1 > > > >>>> should be: 1 > > > >>>> Ch_1_Glob: A > > > >>>> should be: A > > > >>>> Ch_2_Glob: B > > > >>>> should be: B > > > >>>> Arr_1_Glob[8]: 7 > > > >>>> should be: 7 > > > >>>> Arr_2_Glob[8][7]: 5550010 > > > >>>> should be: Number_Of_Runs + 10 > > > >>>> Ptr_Glob-> > > > >>>> Ptr_Comp: 537385352 > > > >>>> should be: (implementation-dependent) > > > >>>> Discr: 0 > > > >>>> should be: 0 > > > >>>> Enum_Comp: 2 > > > >>>> should be: 2 > > > >>>> Int_Comp: 17 > > > >>>> should be: 17 > > > >>>> Str_Comp: DHRYSTONE PROGRAM, SOME STRING > > > >>>> should be: DHRYSTONE PROGRAM, SOME STRING > > > >>>> Next_Ptr_Glob-> > > > >>>> Ptr_Comp: 537385352 > > > >>>> should be: (implementation-dependent), same as above > > > >>>> Discr: 0 > > > >>>> should be: 0 > > > >>>> Enum_Comp: 1 > > > >>>> should be: 1 > > > >>>> Int_Comp: 18 > > > >>>> should be: 18 > > > >>>> Str_Comp: DHRYSTONE PROGRAM, SOME STRING > > > >>>> should be: DHRYSTONE PROGRAM, SOME STRING > > > >>>> Int_1_Loc: 5 > > > >>>> should be: 5 > > > >>>> Int_2_Loc: 13 > > > >>>> should be: 13 > > > >>>> Int_3_Loc: 7 > > > >>>> should be: 7 > > > >>>> Enum_Loc: 1 > > > >>>> should be: 1 > > > >>>> Str_1_Loc: DHRYSTONE PROGRAM, 1'ST STRING > > > >>>> should be: DHRYSTONE PROGRAM, 1'ST STRING > > > >>>> Str_2_Loc: DHRYSTONE PROGRAM, 2'ND STRING > > > >>>> should be: DHRYSTONE PROGRAM, 2'ND STRING > > > >>>> > > > >>>> Microseconds for one run through Dhrystone: 2.3 > > > >>>> Dhrystones per Second: 441306 > > > >>>> > > > >>>> > > > >>>> nsh> pi_css5 > > > >>>> Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave > > > >>>> > > > >>>> Usage: pi_css5 digits > > > >>>> > > > >>>> Number of digits of pi to calculate? > > > >>>> 1000000000 > > > >>>> initializing... > > > >>>> Allocation Failure! > > > >>>> nsh> > > > >>>> nsh> pi_css5 > > > >>>> Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave > > > >>>> > > > >>>> Usage: pi_css5 digits > > > >>>> > > > >>>> Number of digits of pi to calculate? > > > >>>> 1000000 > > > >>>> initializing... > > > >>>> Allocation Failure! > > > >>>> nsh> pi_css5 > > > >>>> Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave > > > >>>> > > > >>>> Usage: pi_css5 digits > > > >>>> > > > >>>> Number of digits of pi to calculate? > > > >>>> 65535 > > > >>>> initializing... > > > >>>> Allocation Failure! > > > >>>> nsh> pi_css5 > > > >>>> Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave > > > >>>> > > > >>>> Usage: pi_css5 digits > > > >>>> > > > >>>> Number of digits of pi to calculate? > > > >>>> 12345 > > > >>>> initializing... > > > >>>> Allocation Failure! > > > >>>> nsh> pi_css5 > > > >>>> Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave > > > >>>> > > > >>>> Usage: pi_css5 digits > > > >>>> > > > >>>> Number of digits of pi to calculate? > > > >>>> 123 > > > >>>> initializing... > > > >>>> nfft= 32 > > > >>>> radi_assert: Current Version: NuttX stntest 12.7.0 > 10e44f8915-dirty > > > >>>> Oct 4 2024 23:50:23 arm > > > >>>> _assert: Assertion failed panic: at file: :0 task: 0x801bda1 > > > >>>> up_dump_register: R0: 00000004 R1: 00000000 R2: 00000000 R3: > > 00000000 > > > >>>> up_dump_register: R4: 00000004 R5: 00000033 R6: 2007d9f8 FP: > > 2007dae8 > > > >>>> up_dump_register: R8: 2007da48 SB: 2007da98 SL: 2007f0e0 R11: > > 2007f0e1 > > > >>>> up_dump_register: IP: 2007db58 SP: 2007ef10 LR: 080089d9 PC: > > 080088f8 > > > >>>> up_dump_register: xPSR: 01000000 PRIMASK: 00000000 CONTROL: > 00000000 > > > >>>> up_dump_register: EXC_RETURN: ffffffe9 > > > >>>> dump_stack: User Stack: > > > >>>> dump_stack: base: 0x2007e858 > > > >>>> dump_stack: size: 00002016 > > > >>>> dump_stack: sp: 0x2007ef10 > > > >>>> stack_dump: 0x2007eef0: 00000000 3fe00000 00000000 00000000 > 00000000 > > > >>>> 00000000 80000010 00000000 > > > >>>> stack_dump: 0x2007ef10: 00000004 080089d9 00000000 08029735 > 00000000 > > > >>>> 00000000 00000000 0801c359 > > > >>>> stack_dump: 0x2007ef30: 2007d9f8 2007f040 00000020 2007f0e0 > 2007f1f8 > > > >>>> 2007f310 2007f040 2007f1f8 > > > >>>> stack_dump: 0x2007ef50: 00000000 00000000 2007f090 2007f310 > 00000001 > > > >>>> 0000000b 00000020 32316970 > > > >>>> stack_dump: 0x2007ef70: 78742e38 00000074 00000000 00000000 > 00000000 > > > >>>> 00000000 00000004 ffffffe9 > > > >>>> stack_dump: 0x2007ef90: 00000000 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> stack_dump: 0x2007efb0: 00000000 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> stack_dump: 0x2007efd0: 00000000 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> stack_dump: 0x2007eff0: 00000000 0801bda1 2007d588 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> stack_dump: 0x2007f010: 00000000 08008b1d 2007e848 00000001 > 2007e848 > > > >>>> 08005cd9 00000000 00000000 > > > >>>> stack_dump: 0x2007f030: 00000000 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> dump_tasks: PID GROUP PRI POLICY TYPE NPX STATE EVENT > > > >>>> SIGMASK STACKBASE STACKSIZE COMMAND > > > >>>> dump_task: 0 0 0 FIFO Kthread - Ready > > > >>>> 0000000000000000 0x2002bf5c 1008 <noname> > > > >>>> dump_task: 1 0 224 RR Kthread - Waiting Semaphore > > > >>>> 0000000000000000 0x2007c238 1984 <noname> 0x200201a4 > > 0x200201c8 > > > >>>> dump_task: 2 0 100 RR Kthread - Waiting Semaphore > > > >>>> 0000000000000000 0x2007cae8 1984 <noname> 0x200201dc > > 0x20020200 > > > >>>> dump_task: 4 4 100 RR Task - Waiting Semaphore > > > >>>> 0000000000000000 0x2007e058 2008 <noname> > > > >>>> dump_task: 12 12 100 RR Task - Running > > > >>>> 0000000000000000 0x2007e858 2016 <noname> > > > >>>> > > > >>>> heh =) > > > >>>> > > > >>>> nsh> pi_css5 > > > >>>> Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave > > > >>>> > > > >>>> Usage: pi_css5 digits > > > >>>> > > > >>>> Number of digits of pi to calculate? > > > >>>> 4 > > > >>>> initi_assert: Current Version: NuttX stntest 12.7.0 > 10e44f8915-dirty > > > >>>> Oct 4 2024 23:50:23 arm > > > >>>> _assert: Assertion failed panic: at file: :0 task: 0x801bda1 > > > >>>> up_dump_register: R0: 00000004 R1: 00000000 R2: 00000000 R3: > > 00000000 > > > >>>> up_dump_register: R4: 00000004 R5: 00000033 R6: 2007d968 FP: > > 2007d9b0 > > > >>>> up_dump_register: R8: 2007d980 SB: 2007d998 SL: 2007d9f8 R11: > > 2007d9f9 > > > >>>> up_dump_register: IP: 2007db58 SP: 2007ef10 LR: 080089d9 PC: > > 080088f8 > > > >>>> up_dump_register: xPSR: 01000000 PRIMASK: 00000000 CONTROL: > 00000000 > > > >>>> up_dump_register: EXC_RETURN: ffffffe9 > > > >>>> dump_stack: User Stack: > > > >>>> dump_stack: base: 0x2007e858 > > > >>>> dump_stack: size: 00002016 > > > >>>> dump_stack: sp: 0x2007ef10 > > > >>>> stack_dump: 0x2007eef0: 00000000 3fe00000 00000000 00000000 > 00000000 > > > >>>> 00000000 80000010 00000000 > > > >>>> stack_dump: 0x2007ef10: 00000004 080089d9 00000000 08029735 > 00000000 > > > >>>> 00000000 00000000 0801c359 > > > >>>> stack_dump: 0x2007ef30: 2007d968 2007d9c8 00000002 2007d9f8 > 2007da20 > > > >>>> 2007da48 2007d9c8 2007da20 > > > >>>> stack_dump: 0x2007ef50: 00000000 00000000 2007d9e0 2007da48 > 00000001 > > > >>>> 00000003 00000002 2e386970 > > > >>>> stack_dump: 0x2007ef70: 00747874 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000004 ffffffe9 > > > >>>> stack_dump: 0x2007ef90: 00000000 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> stack_dump: 0x2007efb0: 00000000 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> stack_dump: 0x2007efd0: 00000000 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> stack_dump: 0x2007eff0: 00000000 0801bda1 2007d588 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> stack_dump: 0x2007f010: 00000000 08008b1d 2007e848 00000001 > 2007e848 > > > >>>> 08005cd9 00000000 00000000 > > > >>>> stack_dump: 0x2007f030: 00000000 00000000 00000000 00000000 > 00000000 > > > >>>> 00000000 00000000 00000000 > > > >>>> dump_tasks: PID GROUP PRI POLICY TYPE NPX STATE EVENT > > > >>>> SIGMASK STACKBASE STACKSIZE COMMAND > > > >>>> dump_task: 0 0 0 FIFO Kthread - Ready > > > >>>> 0000000000000000 0x2002bf5c 1008 <noname> > > > >>>> dump_task: 1 0 224 RR Kthread - Waiting Semaphore > > > >>>> 0000000000000000 0x2007c238 1984 <noname> 0x200201a4 > > 0x200201c8 > > > >>>> dump_task: 2 0 100 RR Kthread - Waiting Semaphore > > > >>>> 0000000000000000 0x2007cae8 1984 <noname> 0x200201dc > > 0x20020200 > > > >>>> dump_task: 4 4 100 RR Task - Waiting Semaphore > > > >>>> 0000000000000000 0x2007e058 2008 <noname> > > > >>>> dump_task: 5 5 100 RR Task - Running > > > >>>> 0000000000000000 0x2007e858 2016 <noname> > > > >>>> > > > >>>> BROKEN :-) > > > >>>> > > > >>>> nsh> radix2_big_64k > > > >>>> Malloc Failed from coremark-pro/mith/src/th_rand.c:241! > > > >>>> > > > >>>> BROKEN :-) > > > >>>> > > > >>>> % gmake clean distclean > > > >>>> > > > >>>> % ./tools/configure.sh -B stm32f769i-disco:nsh > > > >>>> > > > >>>> gmake menuconfig -> add apps / testing / ostest > > > >>>> > > > >>>> gmake -j8 > > > >>>> gmake flash > > > >>>> > > > >>>> % openocd -f interface/stlink.cfg -f target/stm32f7x.cfg -c > > 'program > > > >>>> nuttx.bin 0x08000000; reset run; exit' > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> > > > >>>> nsh> uname -a > > > >>>> NuttX 12.7.0 10e44f8915-dirty Oct 5 2024 00:02:28 arm > > stm32f769i-disco > > > >>>> > > > >>>> nsh> ostest > > > >>>> (..) > > > >>>> user_main: vfork() test > > > >>>> vfork_test: Child 69 ran successfully > > > >>>> > > > >>>> Final memory usage: > > > >>>> VARIABLE BEFORE AFTER > > > >>>> ======== ======== ======== > > > >>>> arena 7dcbc 7dcbc > > > >>>> ordblks 3 6 > > > >>>> mxordblk 59ad0 59ad0 > > > >>>> uordblks 4244 69a4 > > > >>>> fordblks 79a78 77318 > > > >>>> user_main: Exiting > > > >>>> ostest_main: Exiting with status 0 > > > >>>> > > > >>>> Looks like memory usage before and after seems to differ that > > confirms > > > >>>> the memory leak? > > > >>>> > > > >>>> I wanted to use "free" command but it is not built although it is > > not > > > >>>> disabled in the config: > > > >>>> > > > >>>> nsh> free > > > >>>> nsh: free: command not found > > > >>>> > > > >>>> % grep CONFIG_NSH_DISABLE_FREE .config > > > >>>> # CONFIG_NSH_DISABLE_FREE is not set > > > >>>> > > > >>>> > > > >>>> Lets try again with netsh configuration that had free available > and > > add > > > >>>> ostest: > > > >>>> > > > >>>> % gmake clean distclean > > > >>>> > > > >>>> % usr/bin/time -h ./tools/configure.sh -B stm32f769i-disco:netnsh > > > >>>> 4,24s real 1,95s user 2,60s sys > > > >>>> > > > >>>> % gmake menuconfig <- enable ostest > > > >>>> > > > >>>> % grep OSTEST .config > > > >>>> CONFIG_TESTING_OSTEST=y > > > >>>> CONFIG_TESTING_OSTEST_LOOPS=1 > > > >>>> CONFIG_TESTING_OSTEST_STACKSIZE=8192 > > > >>>> CONFIG_TESTING_OSTEST_NBARRIER_THREADS=8 > > > >>>> CONFIG_TESTING_OSTEST_RR_RANGE=10000 > > > >>>> CONFIG_TESTING_OSTEST_RR_RUNS=10 > > > >>>> # CONFIG_TESTING_OSTEST_FPUTESTDISABLE is not set > > > >>>> CONFIG_TESTING_OSTEST_FPULOOPS=16 > > > >>>> CONFIG_TESTING_OSTEST_FPUMSDELAY=750 > > > >>>> CONFIG_TESTING_OSTEST_FPUPRIORITY=100 > > > >>>> CONFIG_TESTING_OSTEST_FPUSTACKSIZE=2048 > > > >>>> CONFIG_TESTING_OSTEST_WAITRESULT=y > > > >>>> > > > >>>> > > > >>>> % /usr/bin/time -h gmake -j8 > > > >>>> 54,54s real 4m31,11s user 50,04s sys > > > >>>> > > > >>>> % gmake flash > > > >>>> LD: nuttx > > > >>>> CP: nuttx.hex > > > >>>> CP: nuttx.bin > > > >>>> > > > >>>> % openocd -f interface/stlink.cfg -f target/stm32f7x.cfg -c > > 'program > > > >>>> nuttx.bin 0x08000000; reset run; exit' > > > >>>> > > > >>>> % cu -l /dev/cuaU0 -s 115200 > > > >>>> Connected > > > >>>> $$$08170221053F680F3A7BF125 > > > >>>> nsh> uname -a > > > >>>> NuttX stntest 12.7.0 10e44f8915-dirty Oct 5 2024 00:43:15 arm > > > >>>> stm32f769i-disco > > > >>>> nsh> free > > > >>>> total used free maxused maxfree > > nused > > > >>>> nfree > > > >>>> Umem: 483056 10112 472944 11192 335096 > > 29 > > > >>>> 4 > > > >>>> nsh> uname -a > > > >>>> NuttX stntest 12.7.0 10e44f8915-dirty Oct 5 2024 00:43:15 arm > > > >>>> stm32f769i-disco > > > >>>> nsh> free > > > >>>> total used free maxused maxfree > > nused > > > >>>> nfree > > > >>>> Umem: 483056 10112 472944 11192 335096 > > 29 > > > >>>> 4 > > > >>>> > > > >>>> nsh> ostest > > > >>>> (..) > > > >>>> user_main: vfork() test > > > >>>> vfork_test: Child 140 ran successfully > > > >>>> > > > >>>> Final memory usage: > > > >>>> VARIABLE BEFORE AFTER > > > >>>> ======== ======== ======== > > > >>>> arena 75ef0 75ef0 > > > >>>> ordblks 4 6 > > > >>>> mxordblk 51cf8 51cf8 > > > >>>> uordblks 5500 7c68 > > > >>>> fordblks 709f0 6e288 > > > >>>> user_main: Exiting > > > >>>> ostest_main: Exiting with status 0 > > > >>>> > > > >>>> nsh> free > > > >>>> total used free maxused maxfree > > nused > > > >>>> nfree > > > >>>> Umem: 483056 10200 472856 49640 335096 > > 31 > > > >>>> 5 > > > >>>> > > > >>>> > > > >>>> nsh> ostest > > > >>>> (..) > > > >>>> user_main: vfork() test > > > >>>> vfork_test: Child 280 ran successfully > > > >>>> > > > >>>> Final memory usage: > > > >>>> VARIABLE BEFORE AFTER > > > >>>> ======== ======== ======== > > > >>>> arena 75ef0 75ef0 > > > >>>> ordblks 4 6 > > > >>>> mxordblk 51cf8 51cf8 > > > >>>> uordblks 5560 7c68 > > > >>>> fordblks 70990 6e288 > > > >>>> user_main: Exiting > > > >>>> ostest_main: Exiting with status 0 > > > >>>> > > > >>>> nsh> free > > > >>>> total used free maxused maxfree > > nused > > > >>>> nfree > > > >>>> Umem: 483056 10200 472856 49728 335096 > > 31 > > > >>>> 5 > > > >>>> > > > >>>> > > > >>>> -- > > > >>>> CeDeROM, SQ7MHZ, http://www.tomek.cedro.info > > > >>>> > > > >>>> > > > >> > > > > > > > > -- > > CeDeROM, SQ7MHZ, http://www.tomek.cedro.info > > >
