Thanks for the responses. Any others?
On Fri, Dec 4, 2020, at 08:36, David Sidrane wrote: > Hi Matais, > > I use GNU ARM Eclipse http://gnuarmeclipse.github.io/ but it is now > https://eclipse-embed-cdt.github.io/ > > I value it for the Segger debugger integration and SVD support. > > I use make file builds imported from git. > > I use a lot of the PX4 boards the FMUv2 2.4.6 (Pixhawk2), FMUv4 (Pixracer > RC15) FMUV5 (Pixhawk4) > > IMXRT10x0-EVK > Nuceo-144 (F7,H7...) > OlimexSTM32 > > I always disable the built-in JTAG and use a Segger JLink or a JTrace and > real FTDI serial ports (isolated), not virtual ones. This decouples the > debugging hHW from the power cycling of the target. > > Imxrt has a cross bar switch but it is not any-to-any as it sounds like > the nRF52 is. > > David > > -----Original Message----- > From: Matias N. [mailto:mat...@imap.cc] > Sent: Thursday, December 03, 2020 5:54 PM > To: dev@nuttx.apache.org > Subject: about IDEs and dev boards > > Hi, > I was wondering what IDEs do you use with NuttX and what is your preferred > dev board (can be more than one). > I'm curious since I have used QtCreator for long time now and generally > works well, but it has some quirks. > And on hardware side I always favored STM32 boards (with embedded > debugger) but after getting into nRF52 I found > it to be much easier to work with and seems a very well designed SoC from > the users perspective. The "mux (almost) any peripheral to any pin" is > great (any other chip does that?). > > Best, > Matias >
