Awesome, thanks! Op za 26 sep. 2020 10:31 p.m. schreef Bob Feretich < bob.feret...@rafresearch.com>:
> Nuttx already supports the STM32F722RET6.� The configuration controls > can be found at > > https://github.com/apache/incubator-nuttx/tree/master/boards/arm/stm32f7/nucleo-144/configs/f722-nsh > > That chip family was tested using the Nucleo-144 development board, which > has the STM32F722ZE (144-pin version of that chip) mounted on it. > > To configure for the STM32F722RE MCU, change the defconfig file replacing: > CONFIG_ARCH_CHIP_STM32F722ZE=y > with > CONFIG_ARCH_CHIP_STM32F722RE=y > > You then need to examine the other files in the� > incubator-nuttx/boards/arm/stm32f7/nucleo-144/ > subtree and modifying whatever is needed to account for any differences > between your board and the Nucleo-144. > > Regards, > Bob > > > On 9/26/2020 12:32 AM, disruptivesolution...@gmail.com wrote: > > NuttX speaks of "boards" and not about MCUs. Maybe a dumb question, but does > NuttX run on custom made PCB's where one uses the MCU named in "boards"? Or > is there something with a bootloader or something? With DFU I can push > nuttx.bin right (if the mcu supports it). > > > > Is there some wish to add the STM32F722RET6? And could one make one in > NuttX based on a F7 already? > > > > Thanks in advance > > Ben > > > > >
