The RAM size was correctly defined. I increased the flash size to 256KB while testing also. My problem is not due to a bug, 16KB is just too little. There are other variants of NRF51822 with 32KB RAM. I suspect that should also be OK.
Best, Matias On Sun, Jul 5, 2020, at 21:22, saito yutaka wrote: > Hello. > > > Well, I started to work on the BLE support on NRF51822 and it seems that > 16KB is not enough for this, considering all the stack space needed for BLE > on NuttX (mainly due to the worker threads and all net stuff). > > Sorry, I think that linker script is wrong. > I modifyed script. > > https://github.com/SaitoYutaka/incubator-nuttx/commit/204388d50c0e4f5db52ea5a76ae15c2b528eaaba > > Thanks > Saito Yutaka > > 2020年7月6日(月) 7:33 Matias N. <mat...@imap.cc>: > > > Well, I started to work on the BLE support on NRF51822 and it seems that > > 16KB is not enough for this, considering all the stack space needed for BLE > > on NuttX (mainly due to the worker threads and all net stuff). I guess I > > will continue this when the NRF52832 arrives, since it has 64KB of SRAM, > > which should be good enough. Luckily, it seems the RADIO peripheral is > > almost the same so I can simply port the code I have made so far easily. > > > > Best, > > Matias > > > > On Fri, Jul 3, 2020, at 11:41, Matias N. wrote: > > > Hi, > > > I can take a look and see if this would work on my nrf51822. Stil, it > > would be better to have > > > the code author prepare a PR against NuttX. I see recent commits so it > > appears an actively maintained > > > WIP. > > > > > > On a related subject: I have ordered an NRF52832 board and module, for > > which my ultimate intentions would be to have NuttX support for RADIO > > peripheral (as was discussed recently on the list). Since the board will > > take some time to arrive and since it appears that NRF51822 RADIO > > peripheral is mostly compatible, I could slowly start to work on it > > (assuming this NRF51822 port is usable to do so). > > > > > > Again, I would learn Bluetooth low-level stuff on the way. I don't mind > > this, but of course if someone else is working/planning to work on this it > > would be good to align efforts to avoid duplicate and wasted work. > > > > > > Alan, if you haven't contacted the code author we could send him an > > email. > > > > > > Best, > > > Matias > > > > > > On Thu, Jul 2, 2020, at 19:43, Alan Carvalho de Assis wrote: > > >> Hi Everyone, > > >> > > >> It appears that someone is porting NuttX to BBC MicroBit board > > >> > > >> https://github.com/SaitoYutaka/incubator-nuttx > > >> > > >> Very interesting! > > >> > > >> He is testing on QEMU, maybe someone with an nRF51822 board could give > > >> it a try! ;-) > > >> > > >> BR, > > >> > > >> Alan > > >> > > > > > >
