Well, I started to work on the BLE support on NRF51822 and it seems that 16KB is not enough for this, considering all the stack space needed for BLE on NuttX (mainly due to the worker threads and all net stuff). I guess I will continue this when the NRF52832 arrives, since it has 64KB of SRAM, which should be good enough. Luckily, it seems the RADIO peripheral is almost the same so I can simply port the code I have made so far easily.
Best, Matias On Fri, Jul 3, 2020, at 11:41, Matias N. wrote: > Hi, > I can take a look and see if this would work on my nrf51822. Stil, it would > be better to have > the code author prepare a PR against NuttX. I see recent commits so it > appears an actively maintained > WIP. > > On a related subject: I have ordered an NRF52832 board and module, for which > my ultimate intentions would be to have NuttX support for RADIO peripheral > (as was discussed recently on the list). Since the board will take some time > to arrive and since it appears that NRF51822 RADIO peripheral is mostly > compatible, I could slowly start to work on it (assuming this NRF51822 port > is usable to do so). > > Again, I would learn Bluetooth low-level stuff on the way. I don't mind this, > but of course if someone else is working/planning to work on this it would be > good to align efforts to avoid duplicate and wasted work. > > Alan, if you haven't contacted the code author we could send him an email. > > Best, > Matias > > On Thu, Jul 2, 2020, at 19:43, Alan Carvalho de Assis wrote: >> Hi Everyone, >> >> It appears that someone is porting NuttX to BBC MicroBit board >> >> https://github.com/SaitoYutaka/incubator-nuttx >> >> Very interesting! >> >> He is testing on QEMU, maybe someone with an nRF51822 board could give >> it a try! ;-) >> >> BR, >> >> Alan >> >
