A session log-off was apparently enough. Ouf !
Maurice -----Message d'origine----- De : Kessler CTR Mark J [mailto:mark.kessler....@usmc.mil] Envoyé : lundi 9 décembre 2013 12:08 À : dev@flex.apache.org Objet : RE: [Builds/Jenkins] Help and advise needed Sounds like a good idea to restart the instance. Then run his start scripts. -Mark -----Original Message----- From: Maurice Amsellem [mailto:maurice.amsel...@systar.com] Sent: Monday, December 09, 2013 5:59 AM To: dev@flex.apache.org Subject: RE: [Builds/Jenkins] Help and advise needed I back back everything (mainly checked "Interact with desktop", then restarted the jenkins service and launched WindowsSlave through jnlp. But it now fails to connection to master, ( retries 10 times, then aborts). Note: I did "Prepare for shutdown" before stopping the service, but apparently , it didn't stop properly. Maybe there are some ports still used or some ghosts processes still running. What should I do now ? restart the VM? Maurice -----Message d'origine----- De : Erik de Bruin [mailto:e...@ixsoftware.nl] Envoyé : lundi 9 décembre 2013 11:13 À : dev@flex.apache.org Objet : Re: [Builds/Jenkins] Help and advise needed The slave agents should load automatically upon restart... If not, there are shortcuts to start it with all over the place ;-) EdB On Mon, Dec 9, 2013 at 11:03 AM, Maurice Amsellem <maurice.amsel...@systar.com> wrote: > I have set up the sample pixelbender job on mustella VM. > Now, I need to remove the "Interact with desktop" option in Jenkins windows > service and restart it. > > Can this be done without risk of the service not restarting properly? > Will the slave agent be restarted automatically? Or does it need to be > launched manually? > > Maurice > > -----Message d'origine----- > De : Maurice Amsellem [mailto:maurice.amsel...@systar.com] > Envoyé : lundi 9 décembre 2013 10:30 > À : dev@flex.apache.org > Objet : RE: [Builds/Jenkins] Help and advise needed > >>I don't mind experiments on the Mustella VM, but remember we don't have a >>proper backup in place. > > I am just going to run some builds, and change some variables. > Everything reversible. > > Maurice > > -----Message d'origine----- > De : Erik de Bruin [mailto:e...@ixsoftware.nl] Envoyé : lundi 9 > décembre 2013 10:23 À : dev@flex.apache.org Objet : Re: > [Builds/Jenkins] Help and advise needed > > I don't mind experiments on the Mustella VM, but remember we don't have a > proper backup in place. > > Our nr. 1 priority now, IMHO, must be to have reliable nightly builds in > place, so any contributors/third parties can get the Flex and FlexJS SDKs and > have the latest and greatest. > > EdB > > > > On Mon, Dec 9, 2013 at 10:13 AM, Maurice Amsellem > <maurice.amsel...@systar.com> wrote: >> 1) On this thread: >> >> https://twitter.com/bigosmallm/status/308466759130816512 >> >> Kevin answering to Om says: >> >> " [pbutil] needs a window, I think, it is failing to initialize OpenGL. If >> you launch it in a visible command window it may work". >> >> So could it be something like Jenkins service permissions ? Is the service >> running as "Local system", and "Interact with desktop" checked ? or is it >> running on a dedicated account? >> >> 2) what about experimenting on "our" mustella vm? >> We could install pixel bender, and try the "pixel bender compile" with >> different settings, see if we can reproduce the "AIF error". >> Of course, that would temporarily break the mustella tests... >> >> >> >> Maurice >> >> -----Message d'origine----- >> De : Erik de Bruin [mailto:e...@ixsoftware.nl] Envoyé : lundi 9 >> décembre 2013 10:01 À : dev@flex.apache.org Objet : Re: >> [Builds/Jenkins] Help and advise needed >> >> Om told me earlier he had the same error when setting up his local system, >> but it went away when the machine was properly set up and he couldn't >> reproduce it after that. This made me think that the root cause might be >> with the machine setup and not with the Jenkins config. >> >> EdB >> >> >> >> On Mon, Dec 9, 2013 at 9:55 AM, Maurice Amsellem >> <maurice.amsel...@systar.com> wrote: >>> Ok, never mind. >>> >>> So what else could it be? >>> >>> Does someone know how to reproduce the "AIF Internal exception" in >>> pixel-bender compiler ? >>> >>> Maurice >>> >>> -----Message d'origine----- >>> De : Erik de Bruin [mailto:e...@ixsoftware.nl] Envoyé : lundi 9 >>> décembre 2013 09:52 À : dev@flex.apache.org Objet : Re: >>> [Builds/Jenkins] Help and advise needed >>> >>> Nope, that's not it. When the last work was done on the new machine, the >>> builds also stopped working on the ORIGINAL, supposedly untouched, machine. >>> >>> EdB >>> >>> >>> >>> On Mon, Dec 9, 2013 at 9:49 AM, Maurice Amsellem >>> <maurice.amsel...@systar.com> wrote: >>>> Hi, >>>> >>>> I have checked the jenskins workspace, there is no env.properties in the >>>> root folder, which means all the env variables are set through system >>>> properties. >>>> So there is a possibility that they were not set the same in the new >>>> machine. >>>> >>>> Makes sense ? >>>> >>>> Maurice >>>> >>>> -----Message d'origine----- >>>> De : Justin Mclean [mailto:jus...@classsoftware.com] Envoyé : lundi >>>> 9 décembre 2013 09:43 À : dev@flex.apache.org Objet : Re: >>>> [Builds/Jenkins] Help and advise needed >>>> >>>> Hi, >>>> >>>> I'd think it would be unlikely that the Pixel Bender path would of changed >>>> as I would assume the Jenkins job was just copied over from the original >>>> windows machine. A good first set would be to check the setup on both (if >>>> we can) and set that the environment variable are the same on both and >>>> then ask if pixel bender has been installed on the second machine in the >>>> same location. >>>> >>>> Thanks, >>>> Justin >>> >>> >>> >>> -- >>> Ix Multimedia Software >>> >>> Jan Luykenstraat 27 >>> 3521 VB Utrecht >>> >>> T. 06-51952295 >>> I. www.ixsoftware.nl >> >> >> >> -- >> Ix Multimedia Software >> >> Jan Luykenstraat 27 >> 3521 VB Utrecht >> >> T. 06-51952295 >> I. www.ixsoftware.nl > > > > -- > Ix Multimedia Software > > Jan Luykenstraat 27 > 3521 VB Utrecht > > T. 06-51952295 > I. www.ixsoftware.nl -- Ix Multimedia Software Jan Luykenstraat 27 3521 VB Utrecht T. 06-51952295 I. www.ixsoftware.nl
