Hi Pascal,

Thanks for the update, I see your point instead of mixing up with int32_t and 
uint64_t; converting to ' struct ether_addr' makes sense.

I will check internally and thanks once again for the suggestion.

Thanks
Vipin Varghese

> -----Original Message-----
> From: Pascal Mazon [mailto:pascal.ma...@6wind.com]
> Sent: Monday, February 5, 2018 3:55 PM
> To: dev@dpdk.org; Varghese, Vipin <vipin.vargh...@intel.com>
> Cc: Yigit, Ferruh <ferruh.yi...@intel.com>; Jain, Deepak K
> <deepak.k.j...@intel.com>; Pascal Mazon <pascal.ma...@6wind.com>
> Subject: [PATCH v2] net/tap: allow user MAC to be passed as args
> 
> From: Vipin Varghese <vipin.vargh...@intel.com>
> 
> Allow TAP PMD to pass user desired MAC address as argument.
> The argument value is processed as string, where each 2 bytes are converted to
> HEX MAC address after validation.
> 
> Signed-off-by: Vipin Varghese <vipin.vargh...@intel.com>
> Signed-off-by: Pascal Mazon <pascal.ma...@6wind.com>
> ---
> 
> Hi Vipin,
> 
> I suggest the following patch for your MAC address argument, if that suits 
> you.
> I removed ETH_TAP_MAC_STR_FXD and ETH_TAP_MAC_STR_USR that were not
> really useful. I find it nicer to deal with MAC mostly inside set_mac_type().
> What do you think? Can you test that it fits your needs?
> 
> Best regards,
> Pascal
> 
>  doc/guides/nics/tap.rst       |  6 ++++
>  drivers/net/tap/rte_eth_tap.c | 80 +++++++++++++++++++++++++++++-----------
> ---
>  2 files changed, 60 insertions(+), 26 deletions(-)
> 
> diff --git a/doc/guides/nics/tap.rst b/doc/guides/nics/tap.rst index
> dc6f834ca0a1..6b083c846b21 100644
> --- a/doc/guides/nics/tap.rst
> +++ b/doc/guides/nics/tap.rst
> @@ -69,6 +69,12 @@ for each interface string containing ``mac=fixed``. The
> MAC address is formatted  as 00:'d':'t':'a':'p':[00-FF]. Convert the 
> characters to
> hex and you get the  actual MAC address: ``00:64:74:61:70:[00-FF]``.
> 
> +   --vdev=net_tap0,mac="00:64:74:61:70:11"
> +
> +The MAC address will have a user value passed as string. The MAC
> +address is in format with delimeter ``:``. The string is byte converted
> +to hex and you get the actual MAC address: ``00:64:74:61:70:11``.
> +
>  It is possible to specify a remote netdevice to capture packets from by 
> adding
> ``remote=foo1``, for example::
> 
> diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c 
> index
> 29d635613c0b..d9e5ec92b8f0 100644
> --- a/drivers/net/tap/rte_eth_tap.c
> +++ b/drivers/net/tap/rte_eth_tap.c
> @@ -49,6 +49,10 @@
>  #define ETH_TAP_MAC_ARG         "mac"
>  #define ETH_TAP_MAC_FIXED       "fixed"
> 
> +#define ETH_TAP_USR_MAC_FMT     "xx:xx:xx:xx:xx:xx"
> +#define ETH_TAP_CMP_MAC_FMT     "0123456789ABCDEFabcdef"
> +#define ETH_TAP_MAC_ARG_FMT     "["ETH_TAP_MAC_FIXED "|"
> ETH_TAP_USR_MAC_FMT"]"
> +
>  static struct rte_vdev_driver pmd_tap_drv;
> 
>  static const char *valid_arguments[] = { @@ -278,15 +282,8 @@
> tap_rx_offload_get_queue_capa(void)
>  static bool
>  tap_rxq_are_offloads_valid(struct rte_eth_dev *dev, uint64_t offloads)  {
> -     uint64_t port_offloads = dev->data->dev_conf.rxmode.offloads;
> -     uint64_t queue_supp_offloads = tap_rx_offload_get_queue_capa();
> -     uint64_t port_supp_offloads = tap_rx_offload_get_port_capa();
> -
> -     if ((offloads & (queue_supp_offloads | port_supp_offloads)) !=
> -         offloads)
> -             return false;
> -     if ((port_offloads ^ offloads) & port_supp_offloads)
> -             return false;
> +     (void)dev;
> +     (void)offloads;
>       return true;
>  }
> 
> @@ -1335,7 +1332,7 @@ static const struct eth_dev_ops ops = {
> 
>  static int
>  eth_dev_tap_create(struct rte_vdev_device *vdev, char *tap_name,
> -                char *remote_iface, int fixed_mac_type)
> +                char *remote_iface, struct ether_addr *mac_addr)
>  {
>       int numa_node = rte_socket_id();
>       struct rte_eth_dev *dev;
> @@ -1397,16 +1394,10 @@ eth_dev_tap_create(struct rte_vdev_device *vdev,
> char *tap_name,
>               pmd->txq[i].fd = -1;
>       }
> 
> -     if (fixed_mac_type) {
> -             /* fixed mac = 00:64:74:61:70:<iface_idx> */
> -             static int iface_idx;
> -             char mac[ETHER_ADDR_LEN] = "\0dtap";
> -
> -             mac[ETHER_ADDR_LEN - 1] = iface_idx++;
> -             rte_memcpy(&pmd->eth_addr, mac, ETHER_ADDR_LEN);
> -     } else {
> +     if (is_zero_ether_addr(mac_addr))
>               eth_random_addr((uint8_t *)&pmd->eth_addr);
> -     }
> +     else
> +             rte_memcpy(&pmd->eth_addr, mac_addr, sizeof(mac_addr));
> 
>       /* Immediately create the netdevice (this will create the 1st queue). */
>       /* rx queue */
> @@ -1577,10 +1568,47 @@ set_mac_type(const char *key __rte_unused,
>            const char *value,
>            void *extra_args)
>  {
> -     if (value &&
> -         !strncasecmp(ETH_TAP_MAC_FIXED, value,
> strlen(ETH_TAP_MAC_FIXED)))
> -             *(int *)extra_args = 1;
> +     char mac_temp[strlen(ETH_TAP_USR_MAC_FMT) + 1], *mac_byte =
> NULL;
> +     struct ether_addr *user_mac = extra_args;
> +     unsigned int index = 0;
> +
> +     if (!value)
> +             return 0;
> +
> +     if (!strncasecmp(ETH_TAP_MAC_FIXED, value,
> +                     strlen(ETH_TAP_MAC_FIXED))) {
> +             static int iface_idx;
> +
> +             /* fixed mac = 00:64:74:61:70:<iface_idx> */
> +             memcpy((char *)user_mac->addr_bytes, "\0dtap",
> ETHER_ADDR_LEN);
> +             user_mac->addr_bytes[ETHER_ADDR_LEN - 1] = iface_idx++ +
> '0';
> +             goto success;
> +     }
> +
> +     if (strlen(value) != strlen(ETH_TAP_USR_MAC_FMT))
> +             goto error;
> +
> +     snprintf(mac_temp, sizeof(mac_temp), "%s", value);
> +     mac_byte = strtok(mac_temp, ":");
> +
> +     while ((mac_byte != NULL) &&
> +                     strspn(mac_byte, ETH_TAP_CMP_MAC_FMT) &&
> +                     strlen(mac_byte) == 2) {
> +             user_mac->addr_bytes[index++] = (char) strtoul(mac_byte,
> NULL, 16);
> +             mac_byte = strtok(NULL, ":");
> +     }
> +
> +     if (index != 6)
> +             goto error;
> +
> +success:
> +     RTE_LOG(DEBUG, PMD, "TAP user MAC param (%s)\n", value);
>       return 0;
> +
> +error:
> +     RTE_LOG(ERR, PMD, "TAP user MAC (%s) is not in format (%s|%s)\n",
> +             value, ETH_TAP_MAC_FIXED, ETH_TAP_USR_MAC_FMT);
> +     return -1;
>  }
> 
>  /* Open a TAP interface device.
> @@ -1594,7 +1622,7 @@ rte_pmd_tap_probe(struct rte_vdev_device *dev)
>       int speed;
>       char tap_name[RTE_ETH_NAME_MAX_LEN];
>       char remote_iface[RTE_ETH_NAME_MAX_LEN];
> -     int fixed_mac_type = 0;
> +     struct ether_addr user_mac = {0};
> 
>       name = rte_vdev_device_name(dev);
>       params = rte_vdev_device_args(dev);
> @@ -1640,7 +1668,7 @@ rte_pmd_tap_probe(struct rte_vdev_device *dev)
>                               ret = rte_kvargs_process(kvlist,
>                                                        ETH_TAP_MAC_ARG,
>                                                        &set_mac_type,
> -                                                      &fixed_mac_type);
> +                                                      &user_mac);
>                               if (ret == -1)
>                                       goto leave;
>                       }
> @@ -1651,7 +1679,7 @@ rte_pmd_tap_probe(struct rte_vdev_device *dev)
>       RTE_LOG(NOTICE, PMD, "Initializing pmd_tap for %s as %s\n",
>               name, tap_name);
> 
> -     ret = eth_dev_tap_create(dev, tap_name, remote_iface,
> fixed_mac_type);
> +     ret = eth_dev_tap_create(dev, tap_name, remote_iface, &user_mac);
> 
>  leave:
>       if (ret == -1) {
> @@ -1716,5 +1744,5 @@ RTE_PMD_REGISTER_ALIAS(net_tap, eth_tap);
> RTE_PMD_REGISTER_PARAM_STRING(net_tap,
>                             ETH_TAP_IFACE_ARG "=<string> "
>                             ETH_TAP_SPEED_ARG "=<int> "
> -                           ETH_TAP_MAC_ARG "=" ETH_TAP_MAC_FIXED " "
> +                           ETH_TAP_MAC_ARG "=" ETH_TAP_MAC_ARG_FMT
>                             ETH_TAP_REMOTE_ARG "=<string>");
> --
> 2.11.0

Reply via email to