On Tue, Jan 09, 2018 at 05:29:36PM +0000, Bruce Richardson wrote:
> On Sun, Dec 31, 2017 at 05:32:01AM +0530, Pavan Nikhilesh wrote:
> > Add Cavium octeontx and thunder nicvf to meson build infrastructure.
> >
> > Signed-off-by: Pavan Nikhilesh <pbhagavat...@caviumnetworks.com>
> > ---
> > drivers/net/meson.build | 3 ++-
> > drivers/net/octeontx/base/meson.build | 12 ++++++++++++
> > drivers/net/octeontx/meson.build | 10 ++++++++++
> > drivers/net/thunderx/Makefile | 2 +-
> > drivers/net/thunderx/base/meson.build | 17
> > +++++++++++++++++
> > drivers/net/thunderx/meson.build | 9 +++++++++
> > ...x_nicvf_version.map => rte_pmd_thunderx_version.map} | 0
> > 7 files changed, 51 insertions(+), 2 deletions(-)
> > create mode 100644 drivers/net/octeontx/base/meson.build
> > create mode 100644 drivers/net/octeontx/meson.build
> > create mode 100644 drivers/net/thunderx/base/meson.build
> > create mode 100644 drivers/net/thunderx/meson.build
> > rename drivers/net/thunderx/{rte_pmd_thunderx_nicvf_version.map =>
> > rte_pmd_thunderx_version.map} (100%)
> >
>
> Some minor comments below.
>
> > diff --git a/drivers/net/meson.build b/drivers/net/meson.build
> > index 72e1d3578..b132d3558 100644
> > --- a/drivers/net/meson.build
> > +++ b/drivers/net/meson.build
> > @@ -3,7 +3,8 @@
> >
> > drivers = ['af_packet', 'bonding',
> > 'e1000', 'fm10k', 'i40e', 'ixgbe',
> > - 'null', 'pcap', 'ring']
> > + 'null', 'pcap', 'ring',
> > + 'octeontx', 'thunderx']
> > std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
> > std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std
> > std_deps += ['bus_vdev'] # same with vdev bus
> > diff --git a/drivers/net/octeontx/base/meson.build
> > b/drivers/net/octeontx/base/meson.build
> > new file mode 100644
> > index 000000000..637483d68
> > --- /dev/null
> > +++ b/drivers/net/octeontx/base/meson.build
> > @@ -0,0 +1,12 @@
> > +sources = [
> > + 'octeontx_bgx.c',
> > + 'octeontx_pkivf.c',
> > + 'octeontx_pkovf.c'
> > +]
> > +
> > +base_lib = static_library('octeontx_base', sources,
> > + c_args: cflags,
> > + dependencies: static_rte_bus_pci,
> > + include_directories: mempool_octeontx_dir)
> > +
> > +base_objs = base_lib.extract_all_objects()
> > diff --git a/drivers/net/octeontx/meson.build
> > b/drivers/net/octeontx/meson.build
> > new file mode 100644
> > index 000000000..f263a4b51
> > --- /dev/null
> > +++ b/drivers/net/octeontx/meson.build
> > @@ -0,0 +1,10 @@
> > +subdir('base')
> > +objs = [base_objs]
> > +
> > +sources = files('octeontx_rxtx.c',
> > + 'octeontx_ethdev.c'
> > + )
> > +
> > +deps += ['mempool_octeontx', 'eventdev']
> > +
> > +includes += include_directories('base')
> > diff --git a/drivers/net/thunderx/Makefile b/drivers/net/thunderx/Makefile
> > index e50e1ad8c..3e4501d34 100644
> > --- a/drivers/net/thunderx/Makefile
> > +++ b/drivers/net/thunderx/Makefile
> > @@ -44,7 +44,7 @@ LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
> > LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
> > LDLIBS += -lrte_bus_pci
> >
> > -EXPORT_MAP := rte_pmd_thunderx_nicvf_version.map
> > +EXPORT_MAP := rte_pmd_thunderx_version.map
> >
> > LIBABIVER := 1
> >
> > diff --git a/drivers/net/thunderx/base/meson.build
> > b/drivers/net/thunderx/base/meson.build
> > new file mode 100644
> > index 000000000..867a6d661
> > --- /dev/null
> > +++ b/drivers/net/thunderx/base/meson.build
> > @@ -0,0 +1,17 @@
> > +sources = [
> > + 'nicvf_bsvf.c',
> > + 'nicvf_hw.c',
> > + 'nicvf_mbox.c'
> > +]
> > +
> > +depends = ['ethdev']
> > +static_obj = []
> > +foreach d: depends
> > + static_obj += [get_variable('static_rte_' + d)]
> > +endforeach
> > +
> > +base_lib = static_library('nicvf_base', sources,
> > + c_args: cflags,
> > + dependencies: static_obj)
> > +
>
> Given there is only one dependency here, I think it's probably best just
> to do like you did with the octeontx base code, and put it explicitly in
> the dependencies line, rather than bothering with a loop.
Agreed, will remove the loop and include directly.
>
> > +base_objs = base_lib.extract_all_objects()
> > diff --git a/drivers/net/thunderx/meson.build
> > b/drivers/net/thunderx/meson.build
> > new file mode 100644
> > index 000000000..17852f732
> > --- /dev/null
> > +++ b/drivers/net/thunderx/meson.build
> > @@ -0,0 +1,9 @@
> > +subdir('base')
> > +objs = [base_objs]
> > +
> > +sources = files('nicvf_ethdev.c',
> > + 'nicvf_svf.c',
> > + 'nicvf_rxtx.c')
> > +cflags += '-Ofast'
>
> Is there a reason this is explicitly needed? The optimization flags for
> the DPDK build as a whole should be covered by the meson top-level
> flags, based on the build type. With this given here, changing the build
> type to "debug" or "debugoptimized" may not work as expected for the
> driver.
I do agree that this would mess up meson debug build. In traditional make
environment we could control file specific cflags but as far as I see I couldnt
find the support for it in meson.
AFAIK meson's default cflags include '-O3' and not '-Ofast'. I will do a quick
benchmark before v2 based on that include the cflag. Also, in case if -Ofast is
necessary I will add a condition to enable it only in case of a normal build.
>
> > +
> > +includes += include_directories('base')
> > diff --git a/drivers/net/thunderx/rte_pmd_thunderx_nicvf_version.map
> > b/drivers/net/thunderx/rte_pmd_thunderx_version.map
> > similarity index 100%
> > rename from drivers/net/thunderx/rte_pmd_thunderx_nicvf_version.map
> > rename to drivers/net/thunderx/rte_pmd_thunderx_version.map
> > --
> > 2.15.1
> >
