Signed-off-by: Amr Mokhtar <amr.mokh...@intel.com>
---
lib/Makefile | 3 +
lib/librte_bbdev/Makefile | 59 ++
lib/librte_bbdev/rte_bbdev.c | 1065 ++++++++++++++++++++++++++++++++
lib/librte_bbdev/rte_bbdev.h | 637 +++++++++++++++++++
lib/librte_bbdev/rte_bbdev_op.h | 469 ++++++++++++++
lib/librte_bbdev/rte_bbdev_pci.h | 276 +++++++++
lib/librte_bbdev/rte_bbdev_pmd.h | 222 +++++++
lib/librte_bbdev/rte_bbdev_vdev.h | 102 +++
lib/librte_bbdev/rte_bbdev_version.map | 32 +
9 files changed, 2865 insertions(+)
create mode 100644 lib/librte_bbdev/Makefile
create mode 100644 lib/librte_bbdev/rte_bbdev.c
create mode 100644 lib/librte_bbdev/rte_bbdev.h
create mode 100644 lib/librte_bbdev/rte_bbdev_op.h
create mode 100644 lib/librte_bbdev/rte_bbdev_pci.h
create mode 100644 lib/librte_bbdev/rte_bbdev_pmd.h
create mode 100644 lib/librte_bbdev/rte_bbdev_vdev.h
create mode 100644 lib/librte_bbdev/rte_bbdev_version.map
diff --git a/lib/Makefile b/lib/Makefile
index 86caba1..0150d9d 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -53,6 +53,9 @@ DEPDIRS-librte_cryptodev := librte_eal librte_mempool
librte_ring librte_mbuf
DEPDIRS-librte_cryptodev += librte_kvargs
DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += librte_eventdev
DEPDIRS-librte_eventdev := librte_eal librte_ring
+DIRS-$(CONFIG_RTE_LIBRTE_BBDEV) += librte_bbdev
+DEPDIRS-librte_bbdev := librte_eal librte_mempool librte_ring librte_mbuf
+DEPDIRS-librte_bbdev += librte_kvargs
DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += librte_vhost
DEPDIRS-librte_vhost := librte_eal librte_mempool librte_mbuf librte_ether
DIRS-$(CONFIG_RTE_LIBRTE_HASH) += librte_hash
diff --git a/lib/librte_bbdev/Makefile b/lib/librte_bbdev/Makefile
new file mode 100644
index 0000000..519d49f
--- /dev/null
+++ b/lib/librte_bbdev/Makefile
@@ -0,0 +1,59 @@
+# BSD LICENSE
+#
+# Copyright(c) 2017 Intel Corporation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_bbdev.a
+
+# library version
+LIBABIVER := 1
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+# library source files
+SRCS-y += rte_bbdev.c
+
+# export include files
+SYMLINK-y-include += rte_bbdev_op.h
+SYMLINK-y-include += rte_bbdev.h
+SYMLINK-y-include += rte_bbdev_pmd.h
+SYMLINK-y-include += rte_bbdev_pci.h
+SYMLINK-y-include += rte_bbdev_vdev.h
+
+# versioning export map
+EXPORT_MAP := rte_bbdev_version.map
+
+# library dependencies
+DEPDIRS-y += lib/librte_eal lib/librte_mempool lib/librte_kvargs
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_bbdev/rte_bbdev.c b/lib/librte_bbdev/rte_bbdev.c
new file mode 100644
index 0000000..76641e0
--- /dev/null
+++ b/lib/librte_bbdev/rte_bbdev.c
@@ -0,0 +1,1065 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <stdbool.h>
+
+#include <rte_common.h>
+#include <rte_errno.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_eal.h>
+#include <rte_malloc.h>
+#include <rte_mempool.h>
+#include <rte_memzone.h>
+#include <rte_lcore.h>
+#include <rte_dev.h>
+#include <rte_spinlock.h>
+#include <rte_tailq.h>
+#include <rte_interrupts.h>
+
+#include "rte_bbdev_op.h"
+#include "rte_bbdev.h"
+#include "rte_bbdev_pmd.h"
+
+#define DEV_NAME "BBDEV"
+
+
+/* Helper macro to check dev_id is valid */
+#define VALID_DEV_OR_RET_ERR(dev, dev_id) do { \
+ if (dev == NULL) { \
+ rte_bbdev_log(ERR, "device %u is invalid", dev_id); \
+ return -ENODEV; \
+ } \
+} while (0)
+
+/* Helper macro to check dev_ops is valid */
+#define VALID_DEV_OPS_OR_RET_ERR(dev, dev_id) do { \
+ if (dev->dev_ops == NULL) { \
+ rte_bbdev_log(ERR, "NULL dev_ops structure in device %u", \
+ dev_id); \
+ return -ENODEV; \
+ } \
+} while (0)
+
+/* Helper macro to check that driver implements required function pointer */
+#define VALID_FUNC_OR_RET_ERR(func, dev_id) do { \
+ if (func == NULL) { \
+ rte_bbdev_log(ERR, "device %u does not support %s", \
+ dev_id, #func); \
+ return -ENOTSUP; \
+ } \
+} while (0)
+
+/* Helper macro to check that queue is valid */
+#define VALID_QUEUE_OR_RET_ERR(queue_id, dev) do { \
+ if (queue_id >= dev->data->num_queues) { \
+ rte_bbdev_log(ERR, "Invalid queue_id %u for device %u", \
+ queue_id, dev->data->dev_id); \
+ return -ERANGE; \
+ } \
+} while (0)
+
+/* List of callback functions registered by an application */
+struct rte_bbdev_callback {
+ TAILQ_ENTRY(rte_bbdev_callback) next; /* Callbacks list */
+ rte_bbdev_cb_fn cb_fn; /* Callback address */
+ void *cb_arg; /* Parameter for callback */
+ void *ret_param; /* Return parameter */
+ enum rte_bbdev_event_type event; /* Interrupt event type */
+ uint32_t active; /* Callback is executing */
+};
+
+/* spinlock for bbdev device callbacks */
+static rte_spinlock_t rte_bbdev_cb_lock = RTE_SPINLOCK_INITIALIZER;
+
+/* Global array of all devices. This is not static because it's used by the
+ * inline enqueue and dequeue functions
+ */
+struct rte_bbdev rte_bbdev_devices[RTE_BBDEV_MAX_DEVS];
+
+/* Global array with rte_bbdev_data structures */
+static struct rte_bbdev_data *rte_bbdev_data;
+
+/* Memzone name for global bbdev data pool */
+static const char *MZ_RTE_BBDEV_DATA = "rte_bbdev_data";
+
+/* Number of currently valid devices */
+static uint16_t num_devs;
+
+/* Return pointer to device structure, with validity check */
+static struct rte_bbdev *
+get_dev(uint16_t dev_id)
+{
+ if (rte_bbdev_is_valid(dev_id))
+ return &rte_bbdev_devices[dev_id];
+ return NULL;
+}
+
+/* Allocate global data array */
+static void
+rte_bbdev_data_alloc(void)
+{
+ const unsigned int flags = 0;
+ const struct rte_memzone *mz;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ mz = rte_memzone_reserve(MZ_RTE_BBDEV_DATA,
+ RTE_BBDEV_MAX_DEVS * sizeof(*rte_bbdev_data),
+ rte_socket_id(), flags);
+ } else
+ mz = rte_memzone_lookup(MZ_RTE_BBDEV_DATA);
+ if (mz == NULL)
+ rte_panic("Cannot allocate memzone for bbdev port data\n");
+
+ rte_bbdev_data = mz->addr;
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ memset(rte_bbdev_data, 0,
+ RTE_BBDEV_MAX_DEVS * sizeof(*rte_bbdev_data));
+}
+
+/* Find lowest device id with no attached device */
+static uint16_t
+find_free_dev_id(void)
+{
+ uint16_t i;
+ for (i = 0; i < RTE_BBDEV_MAX_DEVS; i++) {
+ if (!rte_bbdev_devices[i].attached)
+ return i;
+ }
+ return RTE_BBDEV_MAX_DEVS;
+}
+
+struct rte_bbdev *
+rte_bbdev_allocate(const char *name)
+{
+ int ret;
+ struct rte_bbdev *bbdev;
+ uint16_t dev_id;
+
+ if (name == NULL) {
+ rte_bbdev_log(ERR, "Invalid null device name");
+ return NULL;
+ }
+
+ if (rte_bbdev_get_named_dev(name) != NULL) {
+ rte_bbdev_log(ERR, "Device \"%s\" is already allocated", name);
+ return NULL;
+ }
+
+ dev_id = find_free_dev_id();
+ if (dev_id == RTE_BBDEV_MAX_DEVS) {
+ rte_bbdev_log(ERR, "Reached maximum number of devices");
+ return NULL;
+ }
+
+ bbdev = &rte_bbdev_devices[dev_id];
+
+ if (rte_bbdev_data == NULL)
+ rte_bbdev_data_alloc();
+
+ bbdev->data = &rte_bbdev_data[dev_id];
+ memset(bbdev->data, 0, sizeof(*bbdev->data));
+
+ bbdev->data->dev_id = dev_id;
+ bbdev->attached = true;
+
+ ret = snprintf(bbdev->data->name, RTE_BBDEV_NAME_MAX_LEN, "%s", name);
+ if ((ret < 0) || (ret >= RTE_BBDEV_NAME_MAX_LEN)) {
+ rte_bbdev_log(ERR, "Copying device name \"%s\" failed", name);
+ return NULL;
+ }
+
+ /* init user callbacks */
+ TAILQ_INIT(&(bbdev->list_cbs));
+
+ num_devs++;
+
+ rte_bbdev_log_debug("Initialised device %s (id = %u). Num devices = %u",
+ name, dev_id, num_devs);
+
+ return bbdev;
+}
+
+int
+rte_bbdev_release(struct rte_bbdev *bbdev)
+{
+ uint16_t dev_id;
+ struct rte_bbdev_callback *cb, *next;
+
+ if (bbdev == NULL) {
+ rte_bbdev_log(ERR, "NULL bbdev");
+ return -ENODEV;
+ }
+ dev_id = bbdev->data->dev_id;
+
+ /* free all callbacks from the device's list */
+ for (cb = TAILQ_FIRST(&bbdev->list_cbs); cb != NULL; cb = next) {
+
+ next = TAILQ_NEXT(cb, next);
+ TAILQ_REMOVE(&(bbdev->list_cbs), cb, next);
+ rte_free(cb);
+ }
+
+ memset(bbdev, 0, sizeof(*bbdev));
+ num_devs--;
+
+ rte_bbdev_log_debug(
+ "Un-initialised device id = %u. Num devices = %u",
+ dev_id, num_devs);
+ return 0;
+}
+
+struct rte_bbdev *
+rte_bbdev_get_named_dev(const char *name)
+{
+ unsigned int i;
+
+ if (name == NULL) {
+ rte_bbdev_log(ERR, "NULL driver name");
+ return NULL;
+ }
+
+ for (i = 0; i < RTE_BBDEV_MAX_DEVS; i++) {
+ struct rte_bbdev *dev = get_dev(i);
+ if (dev && (strncmp(dev->data->name,
+ name, RTE_BBDEV_NAME_MAX_LEN) == 0))
+ return dev;
+ }
+
+ return NULL;
+}
+
+uint16_t
+rte_bbdev_count(void)
+{
+ return num_devs;
+}
+
+bool
+rte_bbdev_is_valid(uint16_t dev_id)
+{
+ if ((dev_id < RTE_BBDEV_MAX_DEVS) && rte_bbdev_devices[dev_id].attached)
+ return true;
+ return false;
+}
+
+uint16_t
+rte_bbdev_find_next(uint16_t dev_id)
+{
+ dev_id++;
+ for (; dev_id < RTE_BBDEV_MAX_DEVS; dev_id++)
+ if (rte_bbdev_is_valid(dev_id))
+ break;
+ return dev_id;
+}
+
+int
+rte_bbdev_configure(uint16_t dev_id, uint16_t num_queues,
+ const struct rte_bbdev_conf *conf)
+{
+ unsigned int i;
+ int ret;
+ struct rte_bbdev_driver_info dev_info;
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ if (dev->data->started) {
+ rte_bbdev_log(ERR,
+ "Device %u cannot be configured when started",
+ dev_id);
+ return -EBUSY;
+ }
+
+ /* Get device driver information to get max number of queues */
+ VALID_FUNC_OR_RET_ERR(dev->dev_ops->info_get, dev_id);
+ memset(&dev_info, 0, sizeof(dev_info));
+ dev->dev_ops->info_get(dev, &dev_info);
+
+ if ((num_queues == 0) || (num_queues > dev_info.max_num_queues)) {
+ rte_bbdev_log(ERR,
+ "Device %u supports 0 < N <= %u queues, not %u",
+ dev_id, dev_info.max_num_queues, num_queues);
+ return -EINVAL;
+ }
+
+ /* If re-configuration, get driver to free existing internal memory */
+ if (dev->data->queues != NULL) {
+ VALID_FUNC_OR_RET_ERR(dev->dev_ops->queue_release, dev_id);
+ for (i = 0; i < dev->data->num_queues; i++) {
+ int ret = dev->dev_ops->queue_release(dev, i);
+ if (ret < 0) {
+ rte_bbdev_log(ERR,
+ "Device %u queue %u release
failed",
+ dev_id, i);
+ return ret;
+ }
+ }
+ /* Call optional device close */
+ if (dev->dev_ops->close) {
+ ret = dev->dev_ops->close(dev);
+ if (ret < 0) {
+ rte_bbdev_log(ERR,
+ "Device %u couldn't be closed",
+ dev_id);
+ return ret;
+ }
+ }
+ rte_free(dev->data->queues);
+ }
+
+ /* Allocate queue pointers */
+ dev->data->queues = rte_calloc_socket(DEV_NAME, num_queues,
+ sizeof(dev->data->queues[0]), RTE_CACHE_LINE_SIZE,
+ dev->data->socket_id);
+ if (dev->data->queues == NULL) {
+ rte_bbdev_log(ERR,
+ "calloc of %u queues for device %u on socket %i
failed",
+ num_queues, dev_id, dev->data->socket_id);
+ return -ENOMEM;
+ }
+
+ /* Store configuration */
+ memcpy(&dev->data->conf, (conf != NULL) ? conf : &dev_info.default_conf,
+ sizeof(dev->data->conf));
+ dev->data->num_queues = num_queues;
+
+ /* Call optional device configuration */
+ if (dev->dev_ops->configure) {
+ ret = dev->dev_ops->configure(dev, num_queues,
+ &dev->data->conf);
+ if (ret < 0) {
+ rte_bbdev_log(ERR,
+ "Device %u configuration failed",
+ dev_id);
+ goto error;
+ }
+ }
+
+ rte_bbdev_log_debug("Configured dev %u with %u queues", dev_id,
+ num_queues);
+ return 0;
+
+error:
+ dev->data->num_queues = 0;
+ memset(&dev->data->conf, 0, sizeof(dev->data->conf));
+ rte_free(dev->data->queues);
+ dev->data->queues = NULL;
+ return ret;
+}
+
+int
+rte_bbdev_queue_configure(uint16_t dev_id, uint16_t queue_id,
+ const struct rte_bbdev_queue_conf *conf)
+{
+ int ret = 0;
+ struct rte_bbdev_driver_info dev_info;
+ struct rte_bbdev *dev = get_dev(dev_id);
+ const struct rte_bbdev_op_cap *p;
+ struct rte_bbdev_queue_conf *stored_conf;
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ VALID_QUEUE_OR_RET_ERR(queue_id, dev);
+
+ if (dev->data->queues[queue_id].started || dev->data->started) {
+ rte_bbdev_log(ERR,
+ "Queue %u of device %u cannot be configured
when started",
+ queue_id, dev_id);
+ return -EBUSY;
+ }
+
+ VALID_FUNC_OR_RET_ERR(dev->dev_ops->queue_release, dev_id);
+ VALID_FUNC_OR_RET_ERR(dev->dev_ops->queue_setup, dev_id);
+
+ /* Get device driver information to verify config is valid */
+ VALID_FUNC_OR_RET_ERR(dev->dev_ops->info_get, dev_id);
+ memset(&dev_info, 0, sizeof(dev_info));
+ dev->dev_ops->info_get(dev, &dev_info);
+
+ /* Check configuration is valid */
+ if (conf != NULL) {
+ if ((conf->op_type == RTE_BBDEV_OP_NONE) &&
+ (dev_info.capabilities[0].type ==
+ RTE_BBDEV_OP_NONE)) {
+ ret = 1;
+ } else
+ for (p = dev_info.capabilities;
+ p->type != RTE_BBDEV_OP_NONE; p++) {
+ if (conf->op_type == p->type) {
+ ret = 1;
+ break;
+ }
+ }
+ if (ret == 0) {
+ rte_bbdev_log(ERR, "Invalid operation type");
+ return -EINVAL;
+ }
+ if (conf->queue_size > dev_info.queue_size_lim) {
+ rte_bbdev_log(ERR,
+ "Size (%u) of queue %u of device %u
must be: <= %u",
+ conf->queue_size, queue_id, dev_id,
+ dev_info.queue_size_lim);
+ return -EINVAL;
+ }
+ if (!rte_is_power_of_2(conf->queue_size)) {
+ rte_bbdev_log(ERR,
+ "Size (%u) of queue %u of device %u
must be a power of 2",
+ conf->queue_size, queue_id, dev_id);
+ return -EINVAL;
+ }
+ if (conf->priority > dev_info.max_queue_priority) {
+ rte_bbdev_log(ERR,
+ "Priority (%u) of queue %u of bdev %u
must be <= %u",
+ conf->priority, queue_id, dev_id,
+ dev_info.max_queue_priority);
+ return -EINVAL;
+ }
+ }
+
+ /* Release existing queue (in case of queue reconfiguration) */
+ if (dev->data->queues[queue_id].queue_private != NULL) {
+ ret = dev->dev_ops->queue_release(dev, queue_id);
+ if (ret < 0) {
+ rte_bbdev_log(ERR, "Device %u queue %u release failed",
+ dev_id, queue_id);
+ return ret;
+ }
+ }
+
+ /* Get driver to setup the queue */
+ ret = dev->dev_ops->queue_setup(dev, queue_id, (conf != NULL) ?
+ conf : &dev_info.default_queue_conf);
+ if (ret < 0) {
+ rte_bbdev_log(ERR,
+ "Device %u queue %u setup failed", dev_id,
+ queue_id);
+ return ret;
+ }
+
+ /* Store configuration */
+ stored_conf = &dev->data->queues[queue_id].conf;
+ memcpy(stored_conf,
+ (conf != NULL) ? conf : &dev_info.default_queue_conf,
+ sizeof(*stored_conf));
+
+ rte_bbdev_log_debug("Configured dev%uq%u (size=%u, type=%s, prio=%u)",
+ dev_id, queue_id, stored_conf->queue_size,
+ rte_bbdev_op_type_str(stored_conf->op_type),
+ stored_conf->priority);
+
+ return 0;
+}
+
+int
+rte_bbdev_start(uint16_t dev_id)
+{
+ int i;
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ if (dev->data->started) {
+ rte_bbdev_log_debug("Device %u is already started", dev_id);
+ return 0;
+ }
+
+ if (dev->dev_ops->start) {
+ int ret = dev->dev_ops->start(dev);
+ if (ret < 0) {
+ rte_bbdev_log(ERR, "Device %u start failed", dev_id);
+ return ret;
+ }
+ }
+
+ /* Store new state */
+ for (i = 0; i < dev->data->num_queues; i++)
+ if (!dev->data->queues[i].conf.deferred_start)
+ dev->data->queues[i].started = true;
+ dev->data->started = true;
+
+ rte_bbdev_log_debug("Started device %u", dev_id);
+ return 0;
+}
+
+int
+rte_bbdev_stop(uint16_t dev_id)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ if (!dev->data->started) {
+ rte_bbdev_log_debug("Device %u is already stopped", dev_id);
+ return 0;
+ }
+
+ if (dev->dev_ops->stop)
+ dev->dev_ops->stop(dev);
+ dev->data->started = false;
+
+ rte_bbdev_log_debug("Stopped device %u", dev_id);
+ return 0;
+}
+
+int
+rte_bbdev_close(uint16_t dev_id)
+{
+ int ret;
+ uint16_t i;
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ if (dev->data->started) {
+ ret = rte_bbdev_stop(dev_id);
+ if (ret < 0) {
+ rte_bbdev_log(ERR, "Device %u stop failed", dev_id);
+ return ret;
+ }
+ }
+
+ /* Free memory used by queues */
+ for (i = 0; i < dev->data->num_queues; i++) {
+ ret = dev->dev_ops->queue_release(dev, i);
+ if (ret < 0) {
+ rte_bbdev_log(ERR, "Device %u queue %u release failed",
+ dev_id, i);
+ return ret;
+ }
+ }
+ rte_free(dev->data->queues);
+
+ if (dev->dev_ops->close) {
+ ret = dev->dev_ops->close(dev);
+ if (ret < 0) {
+ rte_bbdev_log(ERR, "Device %u close failed", dev_id);
+ return ret;
+ }
+ }
+
+ /* Clear configuration */
+ dev->data->queues = NULL;
+ dev->data->num_queues = 0;
+ memset(&dev->data->conf, 0, sizeof(dev->data->conf));
+
+ rte_bbdev_log_debug("Closed device %u", dev_id);
+ return 0;
+}
+
+int
+rte_bbdev_queue_start(uint16_t dev_id, uint16_t queue_id)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ VALID_QUEUE_OR_RET_ERR(queue_id, dev);
+
+ if (dev->data->queues[queue_id].started) {
+ rte_bbdev_log_debug("Queue %u of device %u already started",
+ queue_id, dev_id);
+ return 0;
+ }
+
+ if (dev->dev_ops->queue_start) {
+ int ret = dev->dev_ops->queue_start(dev, queue_id);
+ if (ret < 0) {
+ rte_bbdev_log(ERR, "Device %u queue %u start failed",
+ dev_id, queue_id);
+ return ret;
+ }
+ }
+ dev->data->queues[queue_id].started = true;
+
+ rte_bbdev_log_debug("Started queue %u of device %u", queue_id, dev_id);
+ return 0;
+}
+
+int
+rte_bbdev_queue_stop(uint16_t dev_id, uint16_t queue_id)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ VALID_QUEUE_OR_RET_ERR(queue_id, dev);
+
+ if (!dev->data->queues[queue_id].started) {
+ rte_bbdev_log_debug("Queue %u of device %u already stopped",
+ queue_id, dev_id);
+ return 0;
+ }
+
+ if (dev->dev_ops->queue_stop) {
+ int ret = dev->dev_ops->queue_stop(dev, queue_id);
+ if (ret < 0) {
+ rte_bbdev_log(ERR, "Device %u queue %u stop failed",
+ dev_id, queue_id);
+ return ret;
+ }
+ }
+ dev->data->queues[queue_id].started = false;
+
+ rte_bbdev_log_debug("Stopped queue %u of device %u", queue_id, dev_id);
+ return 0;
+}
+
+/* Get device statistics */
+static void
+get_stats_from_queues(struct rte_bbdev *dev, struct rte_bbdev_stats *stats)
+{
+ unsigned int q_id;
+ for (q_id = 0; q_id < dev->data->num_queues; q_id++) {
+ struct rte_bbdev_stats *q_stats =
+ &dev->data->queues[q_id].queue_stats;
+
+ stats->enqueued_count += q_stats->enqueued_count;
+ stats->dequeued_count += q_stats->dequeued_count;
+ stats->enqueue_err_count += q_stats->enqueue_err_count;
+ stats->dequeue_err_count += q_stats->dequeue_err_count;
+ }
+ rte_bbdev_log_debug("Got stats on %u", dev->data->dev_id);
+}
+
+static void
+reset_stats_in_queues(struct rte_bbdev *dev)
+{
+ unsigned int q_id;
+ for (q_id = 0; q_id < dev->data->num_queues; q_id++) {
+ struct rte_bbdev_stats *q_stats =
+ &dev->data->queues[q_id].queue_stats;
+
+ memset(q_stats, 0, sizeof(*q_stats));
+ }
+ rte_bbdev_log_debug("Reset stats on %u", dev->data->dev_id);
+}
+
+int
+rte_bbdev_stats_get(uint16_t dev_id, struct rte_bbdev_stats *stats)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ if (stats == NULL) {
+ rte_bbdev_log(ERR, "NULL stats structure");
+ return -EINVAL;
+ }
+
+ memset(stats, 0, sizeof(*stats));
+ if (dev->dev_ops->stats_get != NULL)
+ dev->dev_ops->stats_get(dev, stats);
+ else
+ get_stats_from_queues(dev, stats);
+
+ rte_bbdev_log_debug("Retrieved stats of device %u", dev_id);
+ return 0;
+}
+
+int
+rte_bbdev_stats_reset(uint16_t dev_id)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+
+ if (dev->dev_ops->stats_reset != NULL)
+ dev->dev_ops->stats_reset(dev);
+ else
+ reset_stats_in_queues(dev);
+
+ rte_bbdev_log_debug("Reset stats of device %u", dev_id);
+ return 0;
+}
+
+int
+rte_bbdev_info_get(uint16_t dev_id, struct rte_bbdev_info *dev_info)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_FUNC_OR_RET_ERR(dev->dev_ops->info_get, dev_id);
+
+ if (dev_info == NULL) {
+ rte_bbdev_log(ERR, "NULL dev info structure");
+ return -EINVAL;
+ }
+
+ /* Copy data maintained by device interface layer */
+ memset(dev_info, 0, sizeof(*dev_info));
+ dev_info->dev_name = dev->data->name;
+ dev_info->conf = dev->data->conf;
+ dev_info->num_queues = dev->data->num_queues;
+ dev_info->bus = rte_bus_find_by_device(dev->device);
+ dev_info->socket_id = dev->data->socket_id;
+ dev_info->started = dev->data->started;
+
+ /* Copy data maintained by device driver layer */
+ dev->dev_ops->info_get(dev, &dev_info->drv);
+
+ rte_bbdev_log_debug("Retrieved info of device %u", dev_id);
+ return 0;
+}
+
+int
+rte_bbdev_queue_info_get(uint16_t dev_id, uint16_t queue_id,
+ struct rte_bbdev_queue_info *dev_info)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ VALID_QUEUE_OR_RET_ERR(queue_id, dev);
+
+ if (dev_info == NULL) {
+ rte_bbdev_log(ERR, "NULL queue info structure");
+ return -EINVAL;
+ }
+
+ /* Copy data to output */
+ memset(dev_info, 0, sizeof(*dev_info));
+ dev_info->conf = dev->data->queues[queue_id].conf;
+ dev_info->started = dev->data->queues[queue_id].started;
+
+ rte_bbdev_log_debug("Retrieved info of queue %u of device %u",
+ queue_id, dev_id);
+ return 0;
+}
+
+/* Calculate size needed to store bbdev_op, depending on type */
+static unsigned int
+get_bbdev_op_size(enum rte_bbdev_op_type type)
+{
+ unsigned int result = sizeof(struct rte_bbdev_op);
+ switch (type) {
+ case RTE_BBDEV_OP_NONE:
+ result += RTE_MAX(sizeof(struct rte_bbdev_op_turbo_dec),
+ sizeof(struct rte_bbdev_op_turbo_enc));
+ break;
+ case RTE_BBDEV_OP_TURBO_DEC:
+ result += sizeof(struct rte_bbdev_op_turbo_dec);
+ break;
+ case RTE_BBDEV_OP_TURBO_ENC:
+ result += sizeof(struct rte_bbdev_op_turbo_enc);
+ break;
+ default:
+ break;
+ }
+
+ return result;
+}
+
+/* Initialise a bbdev_op structure */
+static void
+bbdev_op_init(struct rte_mempool *mempool, void *arg, void *element,
+ __rte_unused unsigned int n)
+{
+ struct rte_bbdev_op *op = element;
+ enum rte_bbdev_op_type type = *(enum rte_bbdev_op_type *)arg;
+
+ memset(op, 0, mempool->elt_size);
+ op->generic = op + 1;
+ op->type = type;
+ op->mempool = mempool;
+}
+
+struct rte_mempool *
+rte_bbdev_op_pool_create(const char *name, enum rte_bbdev_op_type type,
+ unsigned int num_elements, unsigned int cache_size,
+ int socket_id)
+{
+ struct rte_bbdev_op_pool_private *priv;
+ struct rte_mempool *mp;
+
+ if (name == NULL) {
+ rte_bbdev_log(ERR, "NULL name for op pool");
+ return NULL;
+ }
+
+ if (type >= RTE_BBDEV_OP_TYPE_COUNT) {
+ rte_bbdev_log(ERR,
+ "Invalid op type (%u), should be less than %u",
+ type, RTE_BBDEV_OP_TYPE_COUNT);
+ return NULL;
+ }
+
+ mp = rte_mempool_create(name, num_elements, get_bbdev_op_size(type),
+ cache_size, sizeof(struct rte_bbdev_op_pool_private),
+ NULL, NULL, bbdev_op_init, &type, socket_id, 0);
+ if (mp == NULL) {
+ rte_bbdev_log(ERR,
+ "Failed to create op pool %s (num ops=%u, op
size=%u) with error: %s",
+ name, num_elements, get_bbdev_op_size(type),
+ rte_strerror(rte_errno));
+ return NULL;
+ }
+
+ rte_bbdev_log_debug(
+ "Op pool %s created for %u ops (type=%s, cache=%u,
socket=%u, size=%u)",
+ name, num_elements, rte_bbdev_op_type_str(type),
+ cache_size, socket_id, get_bbdev_op_size(type));
+
+ priv = (struct rte_bbdev_op_pool_private *)rte_mempool_get_priv(mp);
+ priv->type = type;
+
+ return mp;
+}
+
+int
+rte_bbdev_callback_register(uint16_t dev_id, enum rte_bbdev_event_type event,
+ rte_bbdev_cb_fn cb_fn, void *cb_arg)
+{
+ struct rte_bbdev_callback *user_cb;
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ if (event >= RTE_BBDEV_EVENT_MAX) {
+ rte_bbdev_log(ERR,
+ "Invalid event type (%u), should be less than
%u",
+ event, RTE_BBDEV_EVENT_MAX);
+ return -EINVAL;
+ }
+
+ if (cb_fn == NULL) {
+ rte_bbdev_log(ERR, "NULL callback function");
+ return -EINVAL;
+ }
+
+ rte_spinlock_lock(&rte_bbdev_cb_lock);
+
+ TAILQ_FOREACH(user_cb, &(dev->list_cbs), next) {
+ if (user_cb->cb_fn == cb_fn &&
+ user_cb->cb_arg == cb_arg &&
+ user_cb->event == event)
+ break;
+ }
+
+ /* create a new callback. */
+ if (user_cb == NULL) {
+ user_cb = rte_zmalloc("INTR_USER_CALLBACK",
+ sizeof(struct rte_bbdev_callback), 0);
+ if (user_cb != NULL) {
+ user_cb->cb_fn = cb_fn;
+ user_cb->cb_arg = cb_arg;
+ user_cb->event = event;
+ TAILQ_INSERT_TAIL(&(dev->list_cbs), user_cb, next);
+ }
+ }
+
+ rte_spinlock_unlock(&rte_bbdev_cb_lock);
+ return (user_cb == NULL) ? -ENOMEM : 0;
+}
+
+int
+rte_bbdev_callback_unregister(uint16_t dev_id, enum rte_bbdev_event_type event,
+ rte_bbdev_cb_fn cb_fn, void *cb_arg)
+{
+ int ret = 0;
+ struct rte_bbdev_callback *cb, *next;
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+
+ if (event >= RTE_BBDEV_EVENT_MAX) {
+ rte_bbdev_log(ERR,
+ "Invalid event type (%u), should be less than
%u",
+ event, RTE_BBDEV_EVENT_MAX);
+ return -EINVAL;
+ }
+
+ if (cb_fn == NULL) {
+ rte_bbdev_log(ERR,
+ "NULL callback function cannot be
unregistered");
+ return -EINVAL;
+ }
+
+ dev = &rte_bbdev_devices[dev_id];
+ rte_spinlock_lock(&rte_bbdev_cb_lock);
+
+ for (cb = TAILQ_FIRST(&dev->list_cbs); cb != NULL; cb = next) {
+
+ next = TAILQ_NEXT(cb, next);
+
+ if (cb->cb_fn != cb_fn || cb->event != event ||
+ (cb_arg != (void *)-1 && cb->cb_arg != cb_arg))
+ continue;
+
+ /* If this callback is not executing right now, remove it. */
+ if (cb->active == 0) {
+ TAILQ_REMOVE(&(dev->list_cbs), cb, next);
+ rte_free(cb);
+ } else
+ ret = -EAGAIN;
+ }
+
+ rte_spinlock_unlock(&rte_bbdev_cb_lock);
+ return ret;
+}
+
+void
+rte_bbdev_pmd_callback_process(struct rte_bbdev *dev,
+ enum rte_bbdev_event_type event, void *ret_param)
+{
+ struct rte_bbdev_callback *cb_lst;
+ struct rte_bbdev_callback dev_cb;
+
+ if (dev == NULL) {
+ rte_bbdev_log(ERR, "NULL device");
+ return;
+ }
+
+ if (dev->data == NULL) {
+ rte_bbdev_log(ERR, "NULL data structure");
+ return;
+ }
+
+ if (event >= RTE_BBDEV_EVENT_MAX) {
+ rte_bbdev_log(ERR,
+ "Invalid event type (%u), should be less than
%u",
+ event, RTE_BBDEV_EVENT_MAX);
+ return;
+ }
+
+ rte_spinlock_lock(&rte_bbdev_cb_lock);
+ TAILQ_FOREACH(cb_lst, &(dev->list_cbs), next) {
+ if (cb_lst->cb_fn == NULL || cb_lst->event != event)
+ continue;
+ dev_cb = *cb_lst;
+ cb_lst->active = 1;
+ if (ret_param != NULL)
+ dev_cb.ret_param = ret_param;
+
+ rte_spinlock_unlock(&rte_bbdev_cb_lock);
+ dev_cb.cb_fn(dev->data->dev_id, dev_cb.event,
+ dev_cb.cb_arg, dev_cb.ret_param);
+ rte_spinlock_lock(&rte_bbdev_cb_lock);
+ cb_lst->active = 0;
+ }
+ rte_spinlock_unlock(&rte_bbdev_cb_lock);
+}
+
+int
+rte_bbdev_queue_intr_enable(uint16_t dev_id, uint16_t queue_id)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+ VALID_QUEUE_OR_RET_ERR(queue_id, dev);
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+ VALID_FUNC_OR_RET_ERR(dev->dev_ops->queue_intr_enable, dev_id);
+ return dev->dev_ops->queue_intr_enable(dev, queue_id);
+}
+
+int
+rte_bbdev_queue_intr_disable(uint16_t dev_id, uint16_t queue_id)
+{
+ struct rte_bbdev *dev = get_dev(dev_id);
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+ VALID_QUEUE_OR_RET_ERR(queue_id, dev);
+ VALID_DEV_OPS_OR_RET_ERR(dev, dev_id);
+ VALID_FUNC_OR_RET_ERR(dev->dev_ops->queue_intr_disable, dev_id);
+ return dev->dev_ops->queue_intr_disable(dev, queue_id);
+}
+
+int
+rte_bbdev_queue_intr_ctl(uint16_t dev_id, uint16_t queue_id, int epfd, int op,
+ void *data)
+{
+ uint32_t vec;
+ struct rte_bbdev *dev = get_dev(dev_id);
+ struct rte_intr_handle *intr_handle;
+ int ret;
+
+ VALID_DEV_OR_RET_ERR(dev, dev_id);
+ VALID_QUEUE_OR_RET_ERR(queue_id, dev);
+
+ intr_handle = dev->intr_handle;
+ if (!intr_handle || !intr_handle->intr_vec) {
+ rte_bbdev_log(ERR, "Device %u intr handle unset\n", dev_id);
+ return -ENOTSUP;
+ }
+
+ if (queue_id >= RTE_MAX_RXTX_INTR_VEC_ID) {
+ rte_bbdev_log(ERR, "Device %u queue_id %u is too big\n",
+ dev_id, queue_id);
+ return -ENOTSUP;
+ }
+
+ vec = intr_handle->intr_vec[queue_id];
+ ret = rte_intr_rx_ctl(intr_handle, epfd, op, vec, data);
+ if (ret && (ret != -EEXIST)) {
+ rte_bbdev_log(ERR,
+ "dev %u q %u int ctl error op %d epfd %d vec
%u\n",
+ dev_id, queue_id, op, epfd, vec);
+ return ret;
+ }
+
+ return 0;
+}
+
+
+const char *
+rte_bbdev_op_type_str(enum rte_bbdev_op_type op_type)
+{
+ static const char * const op_types[] = {
+ "RTE_BBDEV_OP_NONE",
+ "RTE_BBDEV_OP_TURBO_DEC",
+ "RTE_BBDEV_OP_TURBO_ENC",
+ };
+
+ if (op_type < RTE_BBDEV_OP_TYPE_COUNT)
+ return op_types[op_type];
+
+ rte_bbdev_log(ERR, "Invalid operation type");
+ return "";
+}
+
+
+int bbdev_logtype;
+
+RTE_INIT(rte_bbdev_init_log);
+static void
+rte_bbdev_init_log(void)
+{
+ bbdev_logtype = rte_log_register("lib.bbdev");
+ if (bbdev_logtype >= 0)
+ rte_log_set_level(bbdev_logtype, RTE_LOG_NOTICE);
+}
diff --git a/lib/librte_bbdev/rte_bbdev.h b/lib/librte_bbdev/rte_bbdev.h
new file mode 100644
index 0000000..61974a8
--- /dev/null
+++ b/lib/librte_bbdev/rte_bbdev.h
@@ -0,0 +1,637 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BBDEV_H_
+#define _RTE_BBDEV_H_
+
+/**
+ * @file rte_bbdev.h
+ *
+ * Wireless base band device application APIs.
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * This API allows an application to discover, configure and use a device to
+ * process operations. An asynchronous API (enqueue, followed by later dequeue)
+ * is used for processing operations.
+ *
+ * The functions in this API are not thread-safe when called on the same
+ * target object (a device, or a queue on a device), with the exception that
+ * one thread can enqueue operations to a queue while another thread dequeues
+ * from the same queue.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+
+#include <rte_bus.h>
+#include <rte_cpuflags.h>
+#include <rte_memory.h>
+
+#include "rte_bbdev_op.h"
+
+#ifndef RTE_BBDEV_MAX_DEVS
+#define RTE_BBDEV_MAX_DEVS 128 /**< Max number of devices */
+#endif
+
+/**
+ * Get the total number of devices that have been successfully initialised.
+ *
+ * @return
+ * The total number of usable devices.
+ */
+uint16_t
+rte_bbdev_count(void);
+
+/**
+ * Check if a device is valid.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @return
+ * true if device ID is valid and device is attached, false otherwise.
+ */
+bool
+rte_bbdev_is_valid(uint16_t dev_id);
+
+/**
+ * Get the next enabled device.
+ *
+ * @param dev_id
+ * The current device
+ *
+ * @return
+ * - The next device, or
+ * - RTE_BBDEV_MAX_DEVS if none found
+ */
+uint16_t
+rte_bbdev_find_next(uint16_t dev_id);
+
+/** Iterate through all enabled devices */
+#define RTE_BBDEV_FOREACH(i) for (i = rte_bbdev_find_next(-1); \
+ i < RTE_BBDEV_MAX_DEVS; \
+ i = rte_bbdev_find_next(i))
+
+/** Device configuration structure */
+struct rte_bbdev_conf {
+ int socket; /**< NUMA socket used for memory allocation */
+};
+
+/**
+ * Configure a device.
+ * This function must be called on a device before setting up the queues and
+ * starting the device. It can also be called when a device is in the stopped
+ * state. If any device queues have been configured their configuration will be
+ * cleared by a call to this function.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param num_queues
+ * Number of queues to configure on device.
+ * @param conf
+ * The device configuration. If NULL, a default configuration will be used.
+ *
+ * @return
+ * - 0 on success
+ * - EINVAL if num_queues is invalid, 0 or greater than maximum
+ * - EBUSY if the identified device has already started
+ * - ENOMEM if unable to allocate memory
+ */
+int
+rte_bbdev_configure(uint16_t dev_id, uint16_t num_queues,
+ const struct rte_bbdev_conf *conf);
+
+/** Device queue configuration structure */
+struct rte_bbdev_queue_conf {
+ int socket; /**< NUMA socket used for memory allocation */
+ uint32_t queue_size; /**< Size of queue */
+ uint8_t priority; /**< Queue priority */
+ bool deferred_start; /**< Do not start queue when device is started. */
+ enum rte_bbdev_op_type op_type; /**< Operation type */
+};
+
+/**
+ * Configure a queue on a device.
+ * This function can be called after device configuration, and before starting.
+ * It can also be called when the device or the queue is in the stopped state.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the queue.
+ * @param conf
+ * The queue configuration. If NULL, a default configuration will be used.
+ *
+ * @return
+ * - 0 on success
+ * - EINVAL if the identified queue size or priority are invalid
+ * - EBUSY if the identified queue or its device have already started
+ */
+int
+rte_bbdev_queue_configure(uint16_t dev_id, uint16_t queue_id,
+ const struct rte_bbdev_queue_conf *conf);
+
+/**
+ * Start a device.
+ * This is the last step needed before enqueueing operations is possible.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @return
+ * - 0 on success
+ * - negative value on failure - as returned from PMD driver
+ */
+int
+rte_bbdev_start(uint16_t dev_id);
+
+/**
+ * Stop a device.
+ * The device can be reconfigured, and restarted after being stopped.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @return
+ * - 0 on success
+ */
+int
+rte_bbdev_stop(uint16_t dev_id);
+
+/**
+ * Close a device.
+ * The device cannot be restarted without reconfiguration!
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @return
+ * - 0 on success
+ */
+int
+rte_bbdev_close(uint16_t dev_id);
+
+/**
+ * Start a specified queue on a device.
+ * This is only needed if the queue has been stopped, or if the deferred_start
+ * flag has been set when configuring the queue.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the queue.
+ *
+ * @return
+ * - 0 on success
+ * - negative value on failure - as returned from PMD driver
+ */
+int
+rte_bbdev_queue_start(uint16_t dev_id, uint16_t queue_id);
+
+/**
+ * Stop a specified queue on a device, to allow re configuration.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the queue.
+ *
+ * @return
+ * - 0 on success
+ * - negative value on failure - as returned from PMD driver
+ */
+int
+rte_bbdev_queue_stop(uint16_t dev_id, uint16_t queue_id);
+
+/** Device statistics. */
+struct rte_bbdev_stats {
+ uint64_t enqueued_count; /**< Count of all operations enqueued */
+ uint64_t dequeued_count; /**< Count of all operations dequeued */
+ /** Total error count on operations enqueued */
+ uint64_t enqueue_err_count;
+ /** Total error count on operations dequeued */
+ uint64_t dequeue_err_count;
+};
+
+/**
+ * Retrieve the general I/O statistics of a device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param stats
+ * Pointer to structure to where statistics will be copied. On error, this
+ * location may or may not have been modified.
+ *
+ * @return
+ * - 0 on success
+ * - EINVAL if invalid parameter pointer is provided
+ */
+int
+rte_bbdev_stats_get(uint16_t dev_id, struct rte_bbdev_stats *stats);
+
+/**
+ * Reset the statistics of a device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @return
+ * - 0 on success
+ */
+int
+rte_bbdev_stats_reset(uint16_t dev_id);
+
+/** Device information supplied by the device's driver */
+struct rte_bbdev_driver_info {
+ /** Driver name */
+ const char *driver_name;
+
+ /** Maximum number of queues supported by the device */
+ unsigned int max_num_queues;
+ /** Queue size limit (queue size must also be power of 2) */
+ uint32_t queue_size_lim;
+ /** Set if device off-loads operation to hardware */
+ bool hardware_accelerated;
+ /** Max value supported by queue priority */
+ uint8_t max_queue_priority;
+ /** Set if device supports per-queue interrupts */
+ bool queue_intr_supported;
+ /** Minimum alignment of buffers, in bytes */
+ uint16_t min_alignment;
+ /** Default configuration used if none is supplied */
+ struct rte_bbdev_conf default_conf;
+ /** Default queue configuration used if none is supplied */
+ struct rte_bbdev_queue_conf default_queue_conf;
+ /** Device operation capabilities */
+ const struct rte_bbdev_op_cap *capabilities;
+ /** Device cpu_flag requirements */
+ const enum rte_cpu_flag_t *cpu_flag_reqs;
+};
+
+/** Macro used at end of bbdev PMD list */
+#define RTE_BBDEV_END_OF_CAPABILITIES_LIST() \
+ { RTE_BBDEV_OP_NONE }
+
+/** Device information structure used by an application to discover a devices
+ * capabilities and current configuration
+ */
+struct rte_bbdev_info {
+ int socket_id; /**< NUMA socket that device is on */
+ const char *dev_name; /**< Unique device name */
+ const struct rte_bus *bus; /**< Bus information */
+ uint16_t num_queues; /**< Number of queues currently configured */
+ struct rte_bbdev_conf conf; /**< Current device configuration */
+ bool started; /**< Set if device is currently started */
+ struct rte_bbdev_driver_info drv; /**< Info from device driver */
+};
+
+/**
+ * Retrieve information about a device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param dev_info
+ * Pointer to structure to where information will be copied. On error, this
+ * location may or may not have been modified.
+ *
+ * @return
+ * - 0 on success
+ * - EINVAL if invalid parameter pointer is provided
+ */
+int
+rte_bbdev_info_get(uint16_t dev_id, struct rte_bbdev_info *dev_info);
+
+/** Queue information */
+struct rte_bbdev_queue_info {
+ /** Current device configuration */
+ struct rte_bbdev_queue_conf conf;
+ /** Set if queue is currently started */
+ bool started;
+};
+
+/**
+ * Retrieve information about a specific queue on a device.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the queue.
+ * @param dev_info
+ * Pointer to structure to where information will be copied. On error, this
+ * location may or may not have been modified.
+ *
+ * @return
+ * - 0 on success
+ * - EINVAL if invalid parameter pointer is provided
+ */
+int
+rte_bbdev_queue_info_get(uint16_t dev_id, uint16_t queue_id,
+ struct rte_bbdev_queue_info *dev_info);
+
+/** @internal The data structure associated with each queue of a device. */
+struct rte_bbdev_queue_data {
+ void *queue_private; /**< Driver-specific per-queue data */
+ struct rte_bbdev_queue_conf conf; /**< Current configuration */
+ struct rte_bbdev_stats queue_stats; /**< Queue statistics */
+ bool started; /**< Queue state */
+};
+
+/** @internal Enqueue operations for processing on queue of a device. */
+typedef uint16_t (*rte_bbdev_enqueue_ops_t)(struct rte_bbdev_queue_data
*q_data,
+ struct rte_bbdev_op **ops, uint16_t num);
+
+/** @internal Dequeue operations from a queue of a device. */
+typedef uint16_t (*rte_bbdev_dequeue_ops_t)(struct rte_bbdev_queue_data
*q_data,
+ struct rte_bbdev_op **ops, uint16_t num);
+
+#ifndef RTE_BBDEV_NAME_MAX_LEN
+#define RTE_BBDEV_NAME_MAX_LEN 64 /**< Max length of device name */
+#endif
+
+/**
+ * @internal The data associated with a device, with no function pointers.
+ * This structure is safe to place in shared memory to be common among
+ * different processes in a multi-process configuration. Drivers can access
+ * these fields, but should never write to them!
+ */
+struct rte_bbdev_data {
+ char name[RTE_BBDEV_NAME_MAX_LEN]; /**< Unique identifier name */
+ void *dev_private; /**< Driver-specific private data */
+ uint16_t num_queues; /**< Number of currently configured queues */
+ struct rte_bbdev_queue_data *queues; /**< Queue structures */
+ uint16_t dev_id; /**< Device ID */
+ int socket_id; /**< NUMA socket that device is on */
+ struct rte_bbdev_conf conf; /**< Current configuration */
+ bool started; /**< Device run-time state */
+};
+
+/* Forward declarations */
+struct rte_bbdev_ops;
+struct rte_bbdev_callback;
+struct rte_intr_handle;
+
+/** Structure to keep track of registered callbacks */
+TAILQ_HEAD(rte_bbdev_cb_list, rte_bbdev_callback);
+
+/**
+ * @internal The data structure associated with a device. Drivers can access
+ * these fields, but should only write to the *_ops fields.
+ */
+struct __rte_cache_aligned rte_bbdev {
+ rte_bbdev_enqueue_ops_t enqueue_ops; /**< Enqueue function */
+ rte_bbdev_dequeue_ops_t dequeue_ops; /**< Dequeue function */
+ const struct rte_bbdev_ops *dev_ops; /**< Functions exported by PMD */
+ struct rte_bbdev_data *data; /**< Pointer to device data */
+ bool attached; /**< If device is currently attached or not */
+ struct rte_device *device; /**< Backing device */
+ /** User application callback for interrupts if present */
+ struct rte_bbdev_cb_list list_cbs;
+ struct rte_intr_handle *intr_handle; /**< Device interrupt handle */
+};
+
+/** @internal array of all devices */
+extern struct rte_bbdev rte_bbdev_devices[];
+
+/**
+ * Enqueue a burst of processed operations to a queue of the device.
+ * This functions only enqueues as many operations as currently possible and
+ * does not block until @p num_ops entries in the queue are available.
+ * This function does not provide any error notification to avoid the
+ * corresponding overhead.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the queue.
+ * @param ops
+ * Pointer array containing operations to be enqueued Must have at least
+ * @p num_ops entries
+ * @param num_ops
+ * The maximum number of operations to enqueue.
+ *
+ * @return
+ * The number of operations actually enqueued (this is the number of
processed
+ * entries in the @p ops array).
+ */
+static inline uint16_t
+rte_bbdev_enqueue_ops(uint16_t dev_id, uint16_t queue_id,
+ struct rte_bbdev_op **ops, uint16_t num_ops)
+{
+ struct rte_bbdev *dev = &rte_bbdev_devices[dev_id];
+ struct rte_bbdev_queue_data *q_data = &dev->data->queues[queue_id];
+ uint16_t n = dev->enqueue_ops(q_data, ops, num_ops);
+
+ rte_bbdev_log_verbose("%u ops enqueued to dev%u,q%u. Type = %s\n",
+ num_ops, dev_id, queue_id,
+ rte_bbdev_op_type_str(ops[0]->type));
+
+ return n;
+}
+
+/**
+ * Dequeue a burst of processed operations from a queue of the device.
+ * This functions returns only the current contents of the queue, and does not
+ * block until @ num_ops is available.
+ * This function does not provide any error notification to avoid the
+ * corresponding overhead.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ * @param queue_id
+ * The index of the queue.
+ * @param ops
+ * Pointer array where operations will be dequeued to. Must have at least
+ * @p num_ops entries
+ * @param num_ops
+ * The maximum number of operations to dequeue.
+ *
+ * @return
+ * The number of operations actually dequeued (this is the number of entries
+ * copied into the @p ops array).
+ */
+static inline uint16_t
+rte_bbdev_dequeue_ops(uint16_t dev_id, uint16_t queue_id,
+ struct rte_bbdev_op **ops, uint16_t num_ops)
+{
+ struct rte_bbdev *dev = &rte_bbdev_devices[dev_id];
+ struct rte_bbdev_queue_data *q_data = &dev->data->queues[queue_id];
+ uint16_t n = dev->dequeue_ops(q_data, ops, num_ops);
+
+ rte_bbdev_log_verbose("%u ops dequeued to dev%u,q%u\n",
+ n, dev_id, queue_id);
+
+ return n;
+}
+
+/** Definitions of device event types */
+enum rte_bbdev_event_type {
+ RTE_BBDEV_EVENT_UNKNOWN, /**< unknown event type */
+ RTE_BBDEV_EVENT_ERROR, /**< error interrupt event */
+ RTE_BBDEV_EVENT_DEQUEUE, /**< dequeue event */
+ RTE_BBDEV_EVENT_MAX /**< max value of this enum */
+};
+
+/**
+ * Typedef for application callback function registered by application
+ * software for notification of device events
+ *
+ * @param dev_id
+ * Device identifier
+ * @param event
+ * Device event to register for notification of.
+ * @param cb_arg
+ * User specified parameter to be passed to user's callback function.
+ * @param ret_param
+ * To pass data back to user application.
+ */
+typedef void (*rte_bbdev_cb_fn)(uint16_t dev_id,
+ enum rte_bbdev_event_type event, void *cb_arg,
+ void *ret_param);
+
+/**
+ * Register a callback function for specific device id. Multiple callbacks can
+ * be added and will be called in the order they are added when an event is
+ * triggered. Callbacks are called in a separate thread created by the DPDK
EAL.
+ *
+ * @param dev_id
+ * Device id.
+ * @param event
+ * The event that the callback will be registered for.
+ * @param cb_fn
+ * User supplied callback function to be called.
+ * @param cb_arg
+ * Pointer to parameter that will be passed to the callback.
+ *
+ * @return
+ * Zero on success, negative value on failure.
+ */
+int
+rte_bbdev_callback_register(uint16_t dev_id, enum rte_bbdev_event_type event,
+ rte_bbdev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * Unregister a callback function for specific device id.
+ *
+ * @param dev_id
+ * The device identifier.
+ * @param event
+ * The event that the callback will be unregistered for.
+ * @param cb_fn
+ * User supplied callback function to be unregistered.
+ * @param cb_arg
+ * Pointer to the parameter supplied when registering the callback.
+ * (void *)-1 means to remove all registered callbacks with the specified
+ * function address.
+ *
+ * @return
+ * - 0 on success
+ * - EINVAL if invalid parameter pointer is provided
+ * - EAGAIN if the provided callback pointer does not exist
+ */
+int
+rte_bbdev_callback_unregister(uint16_t dev_id, enum rte_bbdev_event_type event,
+ rte_bbdev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * Enable a one-shot interrupt on the next operation enqueued to a particular
+ * queue. The interrupt will be triggered when the operation is ready to be
+ * dequeued. To handle the interrupt, an epoll file descriptor must be
+ * registered using rte_bbdev_queue_intr_ctl(), and then an application
+ * thread/lcore can wait for the interrupt using rte_epoll_wait().
+ *
+ * @param dev_id
+ * The device identifier.
+ * @param queue_id
+ * The index of the queue.
+ *
+ * @return
+ * - 0 on success
+ * - negative value on failure - as returned from PMD driver
+ */
+int
+rte_bbdev_queue_intr_enable(uint16_t dev_id, uint16_t queue_id);
+
+/**
+ * Disable a one-shot interrupt on the next operation enqueued to a particular
+ * queue (if it has been enabled).
+ *
+ * @param dev_id
+ * The device identifier.
+ * @param queue_id
+ * The index of the queue.
+ *
+ * @return
+ * - 0 on success
+ * - negative value on failure - as returned from PMD driver
+ */
+int
+rte_bbdev_queue_intr_disable(uint16_t dev_id, uint16_t queue_id);
+
+/**
+ * Control interface for per-queue interrupts.
+ *
+ * @param dev_id
+ * The device identifier.
+ * @param queue_id
+ * The index of the queue.
+ * @param epfd
+ * Epoll file descriptor that will be associated with the interrupt source.
+ * If the special value RTE_EPOLL_PER_THREAD is provided, a per thread epoll
+ * file descriptor created by the EAL is used (RTE_EPOLL_PER_THREAD can also
+ * be used when calling rte_epoll_wait()).
+ * @param op
+ * The operation be performed for the vector.RTE_INTR_EVENT_ADD or
+ * RTE_INTR_EVENT_DEL.
+ * @param data
+ * User context, that will be returned in the epdata.data field of the
+ * rte_epoll_event structure filled in by rte_epoll_wait().
+ *
+ * @return
+ * - 0 on success
+ * - ENOTSUP if interrupts are not supported by the identified device
+ * - negative value on failure - as returned from PMD driver
+ */
+int
+rte_bbdev_queue_intr_ctl(uint16_t dev_id, uint16_t queue_id, int epfd, int op,
+ void *data);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BBDEV_H_ */
diff --git a/lib/librte_bbdev/rte_bbdev_op.h b/lib/librte_bbdev/rte_bbdev_op.h
new file mode 100644
index 0000000..c023d9a
--- /dev/null
+++ b/lib/librte_bbdev/rte_bbdev_op.h
@@ -0,0 +1,469 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BBDEV_OP_H_
+#define _RTE_BBDEV_OP_H_
+
+/**
+ * @file rte_bbdev_op.h
+ *
+ * Defines wireless base band layer 1 operations and capabilities
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+#include <rte_common.h>
+#include <rte_mbuf.h>
+#include <rte_memory.h>
+#include <rte_mempool.h>
+
+#define RTE_BBDEV_MAX_CODE_BLOCKS 64
+
+extern int bbdev_logtype;
+
+/**
+ * Helper macro for logging
+ *
+ * @param level
+ * Log level: EMERG, ALERT, CRIT, ERR, WARNING, NOTICE, INFO, or DEBUG
+ * @param fmt
+ * The format string, as in printf(3).
+ * @param ...
+ * The variable arguments required by the format string.
+ *
+ * @return
+ * - 0 on success
+ * - Negative on error
+ */
+#define rte_bbdev_log(level, fmt, ...) \
+ rte_log(RTE_LOG_ ## level, bbdev_logtype, fmt "\n", ##__VA_ARGS__)
+
+/**
+ * Helper macro for debug logging with extra source info
+ *
+ * @param fmt
+ * The format string, as in printf(3).
+ * @param ...
+ * The variable arguments required by the format string.
+ *
+ * @return
+ * - 0 on success
+ * - Negative on error
+ */
+#define rte_bbdev_log_debug(fmt, ...) \
+ rte_bbdev_log(DEBUG, RTE_STR(__LINE__) ":%s() " fmt, __func__, \
+ ##__VA_ARGS__)
+
+/**
+ * Helper macro for extra conditional logging from datapath
+ *
+ * @param fmt
+ * The format string, as in printf(3).
+ * @param ...
+ * The variable arguments required by the format string.
+ *
+ * @return
+ * - 0 on success
+ * - Negative on error
+ */
+#define rte_bbdev_log_verbose(fmt, ...) \
+ (void)((RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL) ? \
+ rte_log(RTE_LOG_DEBUG, \
+ bbdev_logtype, ": " fmt "\n", ##__VA_ARGS__) : 0)
+
+/** Flags for turbo decoder operation and capability structure */
+enum rte_bbdev_op_td_flag_bitmasks {
+ /** If sub block de-interleaving is to be performed. */
+ RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE = (1ULL << 0),
+ /** To use CRC Type 24B (otherwise use CRC Type 24A). */
+ RTE_BBDEV_TURBO_CRC_TYPE_24B = (1ULL << 1),
+ /** If turbo equalization is to be performed. */
+ RTE_BBDEV_TURBO_EQUALIZER = (1ULL << 2),
+ /** If set, saturate soft output to +/-127 */
+ RTE_BBDEV_TURBO_SOFT_OUT_SATURATE = (1ULL << 3),
+ /**
+ * Set to 1 to start iteration from even, else odd; one iteration =
+ * max_iteration + 0.5
+ */
+ RTE_BBDEV_TURBO_HALF_ITERATION_EVEN = (1ULL << 4),
+ /**
+ * If 0, TD stops after CRC matches; else if 1, runs to end of next
+ * odd iteration after CRC matches
+ */
+ RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH = (1ULL << 5),
+ /** Set if soft output is required to be output */
+ RTE_BBDEV_TURBO_SOFT_OUTPUT = (1ULL << 6),
+ /** Set to enable early termination mode */
+ RTE_BBDEV_TURBO_EARLY_TERMINATION = (1ULL << 7),
+ /**
+ * Set if the input is a raw data (E bytes, no NULL bytes). If not set
+ * the input is a full circular buffer with data (Kw bytes) as decribed
+ * in spec. 36.212, chapter 5.1.4.1.2.
+ */
+ RTE_BBDEV_TURBO_RAW_INPUT_DATA = (1ULL << 8),
+ /** Set if a device supports decoder dequeue interrupts */
+ RTE_BBDEV_TURBO_DEC_INTERRUPTS = (1ULL << 9),
+};
+
+/** Flags for turbo encoder operation and capability structure */
+enum rte_bbdev_op_te_flag_bitmasks {
+ /** Ignore rv_index and set K0 = 0 */
+ RTE_BBDEV_TURBO_RV_INDEX_BYPASS = (1ULL << 0),
+ /** If rate matching is to be performed */
+ RTE_BBDEV_TURBO_RATE_MATCH = (1ULL << 1),
+ /** This bit must be set to enable CRC-24B generation */
+ RTE_BBDEV_TURBO_CRC_24B_ATTACH = (1ULL << 2),
+ /** This bit must be set to enable CRC-24A generation */
+ RTE_BBDEV_TURBO_CRC_24A_ATTACH = (1ULL << 3),
+ /** Set if a device supports encoder dequeue interrupts */
+ RTE_BBDEV_TURBO_ENC_INTERRUPTS = (1ULL << 4)
+};
+
+/** Data input and output buffer for BBDEV operations */
+struct rte_bbdev_op_data {
+ struct rte_mbuf *data;
+ /**< First mbuf segment with input/output data. Each segment represents
+ * one Code Block. For the input operation a mbuf needs to contain
+ * all Code Blocks. For the output operation the mbuf should consist of
+ * only one segment and the driver will take care of allocating and
+ * chaining another segments for the consecutive Code Blocks if needed.
+ */
+ uint32_t offset;
+ /**< The starting point for the Turbo input/output, in bytes, from the
+ * start of the first segment's data buffer. It must be smaller than the
+ * first segment's data_len!
+ */
+ uint32_t length;
+ /**< Length of Transport Block - number of bytes for Turbo Encode/Decode
+ * operation for input; length of the output for output operation.
+ */
+};
+
+struct rte_bbdev_op_dec_cb_params {
+ uint16_t k; /**< size of the input code block in bits (40 - 6144) */
+ uint32_t e; /**< length in bits of the rate match output (17 bits) */
+};
+
+struct rte_bbdev_op_dec_tb_params {
+ /**< size of the input code block in bits (40 - 6144). Used when
+ * code block index r < c_neg
+ */
+ uint16_t k_neg;
+ /**< size of the input code block in bits (40 - 6144). Used when
+ * code block index r >= c_neg
+ */
+ uint16_t k_pos;
+ uint8_t c_neg; /**< number of code block using k_neg (0 - 63) */
+ uint8_t c; /**< total number of code blocks (1 - 64) */
+ uint8_t cab; /**< number of code blocks using ea before switch to eb */
+ /**< length in bits of the rate match output (17 bits). Used when
+ * code block index r < cab
+ */
+ uint32_t ea;
+ /**< length in bits of the rate match output (17 bits). Used when
+ * code block index r >= cab
+ */
+ uint32_t eb;
+ uint8_t cb_idx; /**< Code block index */
+};
+
+/** Operation structure for the Turbo Decoder */
+struct rte_bbdev_op_turbo_dec {
+ struct rte_bbdev_op_data input; /**< input src data */
+ struct rte_bbdev_op_data hard_output; /**< hard output buffer */
+ struct rte_bbdev_op_data soft_output; /**< soft output buffer */
+
+ uint32_t op_flags; /**< Flags from rte_bbdev_op_td_flag_bitmasks */
+ uint8_t rv_index; /**< Rv index for rate matching (0 - 3) */
+ uint8_t iter_min:4; /**< min number of iterations */
+ uint8_t iter_max:4; /**< max number of iterations */
+ uint8_t iter_count; /**< Actual num. of iterations performed */
+ /** 5 bit extrinsic scale (scale factor on extrinsic info) */
+ uint8_t ext_scale;
+ /** Number of MAP engines, must be power of 2 (or 0 to auto-select) */
+ uint8_t num_maps;
+ uint8_t code_block_mode; /**< 0 - transpot block, 1 - code block */
+ union {
+ /** Struct which stores Code Block specific parameters */
+ struct rte_bbdev_op_dec_cb_params cb_params;
+ /** Struct which stores Transport Block specific parameters */
+ struct rte_bbdev_op_dec_tb_params tb_params;
+ };
+};
+
+struct rte_bbdev_op_enc_cb_params {
+ uint16_t k; /**< size of the input code block in bits (40 - 6144) */
+ uint32_t e; /**< length in bits of the rate match output (17 bits) */
+ uint16_t ncb; /**< Ncb parameter for rate matching, range [k:3(k+4)] */
+};
+
+struct rte_bbdev_op_enc_tb_params {
+ /**< size of the input code block in bits (40 - 6144). Used when
+ * code block index r < c_neg
+ */
+ uint16_t k_neg;
+ /**< size of the input code block in bits (40 - 6144). Used when
+ * code block index r >= c_neg
+ */
+ uint16_t k_pos;
+ uint8_t c_neg; /**< number of code block using k_neg (0 - 63) */
+ uint8_t c; /**< total number of code blocks (1 - 64) */
+ uint8_t cab; /**< number of code blocks using ea before switch to eb */
+ /**< length in bits of the rate match output (17 bits). Used when
+ * code block index r < cab
+ */
+ uint32_t ea;
+ /**< length in bits of the rate match output (17 bits). Used when
+ * code block index r >= cab
+ */
+ uint32_t eb;
+ /**< Ncb parameter for rate matching, range [k : 3(k+4)]. Used when
+ * code block index r < c_neg
+ */
+ uint16_t ncb_neg;
+ /**< Ncb parameter for rate matching, range [k : 3(k+4)]. Used when
+ * code block index r >= c_neg
+ */
+ uint16_t ncb_pos;
+ uint8_t cb_idx; /**< Code block index */
+};
+
+/** Operation structure for the Turbo Encoder */
+struct rte_bbdev_op_turbo_enc {
+ struct rte_bbdev_op_data input; /**< input src data */
+ struct rte_bbdev_op_data output; /**< output buffer */
+
+ uint32_t op_flags; /**< Flags from rte_bbdev_op_te_flag_bitmasks */
+ int32_t n_soft; /**< total number of soft bits according to UE cat. */
+ int32_t k_mimo; /**< MIMO type */
+ int32_t mdl_harq; /**< the maximum number of DL HARQ processes */
+ /**< total number of bits available for transmission of one TB */
+ int32_t g;
+ int32_t nl; /**< number of layer */
+ int32_t qm; /**< modulation type */
+ uint8_t rv_index; /**< Rv index for rate matching (0 - 3) */
+ uint8_t code_block_mode; /**< 0 - transpot block, 1 - code block */
+ union {
+ /** Struct which stores Code Block specific parameters */
+ struct rte_bbdev_op_enc_cb_params cb_params;
+ /** Struct which stores Transport Block specific parameters */
+ struct rte_bbdev_op_enc_tb_params tb_params;
+ };
+};
+
+/** List of the capabilities for the Turbo Decoder */
+struct rte_bbdev_op_cap_turbo_dec {
+ /** Flags from rte_bbdev_op_td_flag_bitmasks */
+ uint32_t capability_flags;
+ uint8_t num_buffers_src; /**< Num input code block buffers */
+ /** Num hard output code block buffers */
+ uint8_t num_buffers_hard_out;
+ /** Num soft output code block buffers if supported by the driver */
+ uint8_t num_buffers_soft_out;
+};
+
+/** List of the capabilities for the Turbo Encoder */
+struct rte_bbdev_op_cap_turbo_enc {
+ /** Flags from rte_bbdev_op_te_flag_bitmasks */
+ uint32_t capability_flags;
+ uint8_t num_buffers_src; /**< Num input code block buffers */
+ uint8_t num_buffers_dst; /**< Num output code block buffers */
+};
+
+/** Different operation types supported by the device */
+enum rte_bbdev_op_type {
+ RTE_BBDEV_OP_NONE, /**< Dummy operation that does nothing */
+ RTE_BBDEV_OP_TURBO_DEC, /**< Turbo decode */
+ RTE_BBDEV_OP_TURBO_ENC, /**< Turbo encode */
+ RTE_BBDEV_OP_TYPE_COUNT, /**< Count of different op types */
+};
+
+/** Bit indexes of possible errors reported through status field */
+enum {
+ RTE_BBDEV_DRV_ERROR,
+ RTE_BBDEV_DATA_ERROR,
+ RTE_BBDEV_CRC_ERROR,
+};
+
+/** Structure specifying a single operation */
+struct rte_bbdev_op {
+ enum rte_bbdev_op_type type; /**< Type of this operation */
+ int status; /**< Status of operation that was performed */
+ struct rte_mempool *mempool; /**< Mempool which op instance is in */
+ void *opaque_data; /**< Opaque pointer for user data */
+ /**
+ * Anonymous union of operation-type specific parameters. When allocated
+ * using rte_bbdev_op_pool_create(), space is allocated for the
+ * parameters at the end of each rte_bbdev_op structure, and the
+ * pointers here point to it.
+ */
+ RTE_STD_C11
+ union {
+ void *generic;
+ struct rte_bbdev_op_turbo_dec *turbo_dec;
+ struct rte_bbdev_op_turbo_enc *turbo_enc;
+ };
+};
+
+/** Operation capabilities supported by a device */
+struct rte_bbdev_op_cap {
+ enum rte_bbdev_op_type type; /**< Type of operation */
+ union {
+ struct rte_bbdev_op_cap_turbo_dec turbo_dec;
+ struct rte_bbdev_op_cap_turbo_enc turbo_enc;
+ } cap; /**< Operation-type specific capabilities */
+};
+
+/** @internal Private data structure stored with operation pool. */
+struct rte_bbdev_op_pool_private {
+ enum rte_bbdev_op_type type; /**< Type of operations in a pool */
+};
+
+/**
+ * Converts queue operation type from enum to string
+ *
+ * @param op_type
+ * Operation type as enum
+ *
+ * @returns
+ * Operation type as string
+ *
+ */
+const char*
+rte_bbdev_op_type_str(enum rte_bbdev_op_type op_type);
+
+/**
+ * Creates a bbdev operation mempool
+ *
+ * @param name
+ * Pool name.
+ * @param type
+ * Operation type, use RTE_BBDEV_OP_NONE for a pool which supports all
+ * operation types.
+ * @param num_elements
+ * Number of elements in the pool.
+ * @param cache_size
+ * Number of elements to cache on an lcore, see rte_mempool_create() for
+ * further details about cache size.
+ * @param socket_id
+ * Socket to allocate memory on.
+ *
+ * @return
+ * - Pointer to a mempool on success,
+ * - NULL pointer on failure.
+ */
+struct rte_mempool *
+rte_bbdev_op_pool_create(const char *name, enum rte_bbdev_op_type type,
+ unsigned int num_elements, unsigned int cache_size,
+ int socket_id);
+
+/**
+ * Bulk allocate operations from a mempool with parameter defaults reset.
+ *
+ * @param mempool
+ * Operation mempool, created by rte_bbdev_op_pool_create().
+ * @param type
+ * Operation type to allocate
+ * @param ops
+ * Output array to place allocated operations
+ * @param num_ops
+ * Number of operations to allocate
+ *
+ * @returns
+ * - 0 on success
+ * - EINVAL if invalid mempool is provided
+ */
+static inline int
+rte_bbdev_op_alloc_bulk(struct rte_mempool *mempool,
+ enum rte_bbdev_op_type type, struct rte_bbdev_op **ops,
+ uint16_t num_ops)
+{
+ struct rte_bbdev_op_pool_private *priv;
+ uint16_t i;
+ int ret;
+
+ /* Check type */
+ priv = (struct rte_bbdev_op_pool_private *)
+ rte_mempool_get_priv(mempool);
+ if (unlikely((priv->type != type) &&
+ (priv->type != RTE_BBDEV_OP_NONE)))
+ return -EINVAL;
+
+ /* Get elements */
+ ret = rte_mempool_get_bulk(mempool, (void **)ops, num_ops);
+ if (unlikely(ret < 0))
+ return ret;
+
+ /* Reset to default */
+ for (i = 0; i < num_ops; i++) {
+ struct rte_bbdev_op *op = ops[i];
+ op->type = type;
+ }
+
+ rte_bbdev_log_verbose("%u ops allocated from %s, type = %s\n",
+ num_ops, mempool->name,
+ rte_bbdev_op_type_str(type));
+
+ return 0;
+}
+
+/**
+ * Free operation structures that were allocated by rte_bbdev_op_alloc_bulk().
+ * All structures must belong to the same mempool.
+ *
+ * @param ops
+ * Operation structures
+ * @param num_ops
+ * Number of structures
+ */
+static inline void
+rte_bbdev_op_free_bulk(struct rte_bbdev_op **ops, unsigned int num_ops)
+{
+ if (num_ops > 0) {
+ rte_mempool_put_bulk(ops[0]->mempool, (void **)ops, num_ops);
+ rte_bbdev_log_verbose("%u ops freed to %s\n", num_ops,
+ ops[0]->mempool->name);
+ }
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BBDEV_OP_H_ */
diff --git a/lib/librte_bbdev/rte_bbdev_pci.h b/lib/librte_bbdev/rte_bbdev_pci.h
new file mode 100644
index 0000000..128ee58
--- /dev/null
+++ b/lib/librte_bbdev/rte_bbdev_pci.h
@@ -0,0 +1,276 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BBDEV_PCI_H_
+#define _RTE_BBDEV_PCI_H_
+
+/**
+ * @file rte_bbdev_pci.h
+ *
+ * Wireless base band PCI-driver-facing APIs.
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * This API provides the helper functions for device PCI drivers to register
+ * with the bbdev interface. User applications should not use this API.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <rte_log.h>
+#include <rte_pci.h>
+
+#include "rte_bbdev_pmd.h"
+
+/**
+ * @internal
+ * Initialisation function of a HW driver invoked for each matching HW device
+ * detected during the EAL initialisation phase, or when a new device is
+ * attached. The driver should initialise the device and its own software
+ * context.
+ *
+ * @param dev
+ * This is a new device structure instance that is associated with the
+ * matching device.
+ * The driver *must* populate the following fields:
+ * - dev_ops
+ * - enqueue_ops
+ * - dequeue_ops
+ *
+ * @return
+ * - 0 on success
+ */
+typedef int (*rte_bbdev_init_t)(struct rte_bbdev *dev);
+
+/**
+ * @internal
+ * Finalization function of a HW driver invoked for each matching HW device
+ * detected during the closing phase, or when a device is detached.
+ *
+ * @param dev
+ * The device structure instance that is associated with the matching device.
+ *
+ * @return
+ * - 0 on success
+ */
+typedef int (*rte_bbdev_uninit_t)(struct rte_bbdev *dev);
+
+/**
+ * @internal
+ * Allocates a new bbdev slot for an PCI device and returns the pointer to that
+ * slot for the driver to use.
+ *
+ * @param dev
+ * Pointer to the PCI device
+ *
+ * @param private_data_size
+ * Size of private data structure
+ *
+ * @return
+ * A pointer to a rte_bbdev or NULL if allocation failed.
+ */
+static inline struct rte_bbdev *
+rte_bbdev_pci_allocate(struct rte_pci_device *dev, size_t private_data_size)
+{
+ const char *name;
+ struct rte_bbdev *bbdev = NULL;
+
+ if (dev == NULL) {
+ rte_bbdev_log(ERR, "NULL PCI device");
+ return NULL;
+ }
+
+ name = dev->device.name;
+
+ /* Allocate memory to be used privately by drivers */
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ bbdev = rte_bbdev_allocate(name);
+ if (!bbdev)
+ return NULL;
+
+ if (private_data_size) {
+ bbdev->data->dev_private = rte_zmalloc_socket(name,
+ private_data_size, RTE_CACHE_LINE_SIZE,
+ dev->device.numa_node);
+ if (bbdev->data->dev_private == NULL) {
+ rte_bbdev_log(CRIT,
+ "Allocate of %zu bytes for
device \"%s\"failed",
+ private_data_size, name);
+ rte_bbdev_release(bbdev);
+ return NULL;
+ }
+ }
+ }
+
+ bbdev->data->socket_id = dev->device.numa_node;
+ return bbdev;
+}
+
+static inline void
+rte_bbdev_pci_release(struct rte_bbdev *bbdev)
+{
+ int ret;
+ uint16_t dev_id = bbdev->data->dev_id;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(bbdev->data->dev_private);
+
+ ret = rte_bbdev_release(bbdev);
+ if (ret)
+ rte_bbdev_log(ERR, "Device %i failed to uninit: %i", dev_id,
+ ret);
+
+ rte_bbdev_log_debug("Un-initialised HW device id = %u", dev_id);
+}
+
+/**
+ * @internal
+ * Wrapper for use by pci drivers as a .probe function to attach to a bbdev
+ * interface.
+ */
+static inline int
+rte_bbdev_pci_generic_probe(struct rte_pci_device *pci_dev,
+ size_t private_data_size,
+ rte_bbdev_init_t dev_init)
+{
+ struct rte_bbdev *bbdev = NULL;
+ char dev_name[RTE_BBDEV_NAME_MAX_LEN];
+ int ret;
+
+ rte_pci_device_name(&pci_dev->addr, dev_name, sizeof(dev_name));
+
+ bbdev = rte_bbdev_pci_allocate(pci_dev, private_data_size);
+ if (bbdev == NULL)
+ return -ENOMEM;
+
+ /* Fill HW specific part of device structure */
+ bbdev->device = &pci_dev->device;
+ bbdev->intr_handle = &pci_dev->intr_handle;
+
+ /* Invoke PMD device initialization function */
+ if (dev_init) {
+ ret = dev_init(bbdev);
+
+ if (bbdev->dev_ops == NULL) {
+ rte_bbdev_log(ERR, "NULL dev_ops structure in device
%u",
+ bbdev->data->dev_id);
+ return -ENODEV;
+ }
+
+ if (bbdev->enqueue_ops == NULL) {
+ rte_bbdev_log(ERR,
+ "NULL enqueue_ops structure in device
%u",
+ bbdev->data->dev_id);
+ return -ENODEV;
+ }
+ if (bbdev->dequeue_ops == NULL) {
+ rte_bbdev_log(ERR,
+ "NULL dequeue_ops structure in device
%u",
+ bbdev->data->dev_id);
+ return -ENODEV;
+ }
+
+ if (ret < 0) {
+ rte_bbdev_log(ERR,
+ "Driver %s(vendor_id=0x%x
device_id=0x%x): failed: %i",
+ pci_dev->driver->driver.name,
+ pci_dev->id.vendor_id,
+ pci_dev->id.device_id, ret);
+ rte_bbdev_pci_release(bbdev);
+ return -ENXIO;
+ }
+ } else {
+ rte_bbdev_log(ERR,
+ "Device init function doesn't exist for driver
%s",
+ pci_dev->driver->driver.name);
+ return -ENODEV;
+ }
+
+ rte_bbdev_log_debug("Initialised HW device %s (id = %u)",
+ dev_name, bbdev->data->dev_id);
+ return 0;
+}
+
+/**
+ * @internal
+ * Wrapper for use by pci drivers as a .remove function to detach a bbdev
+ * interface.
+ */
+static inline int
+rte_bbdev_pci_generic_remove(struct rte_pci_device *pci_dev,
+ rte_bbdev_uninit_t dev_uninit)
+{
+ struct rte_bbdev *bbdev;
+ int ret;
+ uint8_t dev_id;
+
+ if (pci_dev == NULL)
+ return -EINVAL;
+
+ /* Find device */
+ bbdev = rte_bbdev_get_named_dev(pci_dev->device.name);
+ if (bbdev == NULL) {
+ rte_bbdev_log(CRIT,
+ "Couldn't find HW dev \"%s\" to uninitialise
it",
+ pci_dev->device.name);
+ return -ENODEV;
+ }
+ dev_id = bbdev->data->dev_id;
+
+ /* Close device before uninit */
+ ret = rte_bbdev_close(dev_id);
+ if (ret < 0)
+ rte_bbdev_log(ERR,
+ "Device %i failed to close during uninit: %i",
+ dev_id, ret);
+
+ /* Invoke PMD device uninit function */
+ if (dev_uninit) {
+ ret = dev_uninit(bbdev);
+ if (ret)
+ rte_bbdev_log(ERR, "Device %i failed to uninit: %i",
+ dev_id, ret);
+ }
+
+ rte_bbdev_pci_release(bbdev);
+ return 0;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BBDEV_PCI_H_ */
diff --git a/lib/librte_bbdev/rte_bbdev_pmd.h b/lib/librte_bbdev/rte_bbdev_pmd.h
new file mode 100644
index 0000000..9cfbc18
--- /dev/null
+++ b/lib/librte_bbdev/rte_bbdev_pmd.h
@@ -0,0 +1,222 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BBDEV_PMD_H_
+#define _RTE_BBDEV_PMD_H_
+
+/**
+ * @file rte_bbdev_pmd.h
+ *
+ * Wireless base band driver-facing APIs.
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * This API provides the mechanism for device drivers to register with the
+ * bbdev interface. User applications should not use this API.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <rte_log.h>
+
+#include "rte_bbdev.h"
+
+/** Suggested value for SW based devices */
+#define RTE_BBDEV_DEFAULT_MAX_NB_QUEUES RTE_MAX_LCORE
+
+/** Suggested value for SW based devices */
+#define RTE_BBDEV_QUEUE_SIZE_LIMIT 16384
+
+/**
+ * @internal
+ * Allocates a new slot for a bbdev and returns the pointer to that slot
+ * for the driver to use.
+ *
+ * @param name
+ * Unique identifier name for each bbdev device
+ *
+ * @return
+ * - Slot in the rte_bbdev array for a new device;
+ */
+struct rte_bbdev *
+rte_bbdev_allocate(const char *name);
+
+/**
+ * @internal
+ * Release the specified bbdev.
+ *
+ * @param bbdev
+ * The *bbdev* pointer is the address of the *rte_bbdev* structure.
+ * @return
+ * - 0 on success, negative on error
+ */
+int
+rte_bbdev_release(struct rte_bbdev *bbdev);
+
+/**
+ * Get the device structure for a named device.
+ *
+ * @param name
+ * Name of the device
+ *
+ * @return
+ * - The device structure pointer, or
+ * - NULL otherwise
+ *
+ */
+struct rte_bbdev *
+rte_bbdev_get_named_dev(const char *name);
+
+/**
+ * Definitions of all functions exported by a driver through the the generic
+ * structure of type *rte_bbdev_ops* supplied in the *rte_bbdev* structure
+ * associated with a device.
+ */
+
+/** @internal Function used to configure a device. */
+typedef int (*rte_bbdev_configure_t)(struct rte_bbdev *dev, uint16_t
num_queues,
+ const struct rte_bbdev_conf *conf);
+
+/** @internal Function to allocate and configure a device queue. */
+typedef int (*rte_bbdev_queue_setup_t)(struct rte_bbdev *dev,
+ uint16_t queue_id, const struct rte_bbdev_queue_conf *conf);
+
+/* @internal
+ * Function to release memory resources allocated for a device queue.
+ */
+typedef int (*rte_bbdev_queue_release_t)(struct rte_bbdev *dev,
+ uint16_t queue_id);
+
+/** @internal Function to start a configured device. */
+typedef int (*rte_bbdev_start_t)(struct rte_bbdev *dev);
+
+/** @internal Function to stop a device. */
+typedef void (*rte_bbdev_stop_t)(struct rte_bbdev *dev);
+
+/** @internal Function to close a device. */
+typedef int (*rte_bbdev_close_t)(struct rte_bbdev *dev);
+
+/** @internal Function to start a device queue. */
+typedef int (*rte_bbdev_queue_start_t)(struct rte_bbdev *dev,
+ uint16_t queue_id);
+
+/** @internal Function to stop a device queue. */
+typedef int (*rte_bbdev_queue_stop_t)(struct rte_bbdev *dev, uint16_t
queue_id);
+
+/** @internal Function to read stats from a device. */
+typedef void (*rte_bbdev_stats_get_t)(struct rte_bbdev *dev,
+ struct rte_bbdev_stats *stats);
+
+/** @internal Function to reset stats on a device. */
+typedef void (*rte_bbdev_stats_reset_t)(struct rte_bbdev *dev);
+
+/** @internal Function to retrieve specific information of a device. */
+typedef void (*rte_bbdev_info_get_t)(struct rte_bbdev *dev,
+ struct rte_bbdev_driver_info *dev_info);
+
+/** @internal Function to retrieve specific information of a device. */
+typedef void (*rte_bbdev_info_get_t)(struct rte_bbdev *dev,
+ struct rte_bbdev_driver_info *dev_info);
+
+/* @internal
+ * Function to enable interrupt for next op on a queue of a device.
+ */
+typedef int (*rte_bbdev_queue_intr_enable_t)(struct rte_bbdev *dev,
+ uint16_t queue_id);
+
+/* @internal
+ * Function to disable interrupt for next op on a queue of a device.
+ */
+typedef int (*rte_bbdev_queue_intr_disable_t)(struct rte_bbdev *dev,
+ uint16_t queue_id);
+
+/**
+ * Operations implemented by drivers. Fields marked as "Required" must be
+ * provided by a driver for a device to have basic functionality. "Optional"
+ * fields are for non-vital operations
+ */
+struct rte_bbdev_ops {
+ /**< Configure device. Optional. */
+ rte_bbdev_configure_t configure;
+ /**< Start device. Optional. */
+ rte_bbdev_start_t start;
+ /**< Stop device. Optional. */
+ rte_bbdev_stop_t stop;
+ /**< Close device. Optional. */
+ rte_bbdev_close_t close;
+
+ /**< Get device info. Required. */
+ rte_bbdev_info_get_t info_get;
+ /** Get device statistics. Optional. */
+ rte_bbdev_stats_get_t stats_get;
+ /** Reset device statistics. Optional. */
+ rte_bbdev_stats_reset_t stats_reset;
+
+ /** Set up a device queue. Required. */
+ rte_bbdev_queue_setup_t queue_setup;
+ /** Release a queue. Required. */
+ rte_bbdev_queue_release_t queue_release;
+ /** Start a queue. Optional. */
+ rte_bbdev_queue_start_t queue_start;
+ /**< Stop a queue pair. Optional. */
+ rte_bbdev_queue_stop_t queue_stop;
+
+ /** Enable queue interrupt. Optional */
+ rte_bbdev_queue_intr_enable_t queue_intr_enable;
+ /** Disable queue interrupt. Optional */
+ rte_bbdev_queue_intr_disable_t queue_intr_disable;
+};
+
+/**
+ * Executes all the user application registered callbacks for the specific
+ * device and event type.
+ *
+ * @param dev
+ * Pointer to the device structure.
+ * @param event
+ * Event type.
+ * @param ret_param
+ * To pass data back to user application.
+ */
+void
+rte_bbdev_pmd_callback_process(struct rte_bbdev *dev,
+ enum rte_bbdev_event_type event, void *ret_param);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BBDEV_PMD_H_ */
diff --git a/lib/librte_bbdev/rte_bbdev_vdev.h
b/lib/librte_bbdev/rte_bbdev_vdev.h
new file mode 100644
index 0000000..fbaef2e
--- /dev/null
+++ b/lib/librte_bbdev/rte_bbdev_vdev.h
@@ -0,0 +1,102 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BBDEV_VDEV_H_
+#define _RTE_BBDEV_VDEV_H_
+
+/**
+ * @file rte_bbdev_vdev.h
+ *
+ * Wireless base band virtual device driver-facing APIs.
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * This API provides the helper functions for virtual device drivers to
register
+ * with the bbdev interface. User applications should not use this API.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <rte_vdev.h>
+
+#include "rte_bbdev_pmd.h"
+
+/**
+ * @internal
+ * Allocates a new slot for a virtual bbdev and returns the pointer to that
slot
+ * for the driver to use.
+ *
+ * @param dev
+ * Pointer to virtual device
+ *
+ * @param private_data_size
+ * Size of private data structure
+ *
+ * @return
+ * A pointer to a rte_bbdev or NULL if allocation failed.
+ */
+static inline struct rte_bbdev *
+rte_bbdev_vdev_allocate(struct rte_vdev_device *dev, size_t private_data_size)
+{
+ struct rte_bbdev *bbdev;
+ const char *name = rte_vdev_device_name(dev);
+
+ bbdev = rte_bbdev_allocate(name);
+ if (!bbdev)
+ return NULL;
+
+ if (private_data_size) {
+ bbdev->data->dev_private = rte_zmalloc_socket(name,
+ private_data_size, RTE_CACHE_LINE_SIZE,
+ dev->device.numa_node);
+ if (!bbdev->data->dev_private) {
+ rte_bbdev_release(bbdev);
+ return NULL;
+ }
+ }
+
+ bbdev->data->socket_id = dev->device.numa_node;
+ bbdev->device = &dev->device;
+ bbdev->intr_handle = NULL;
+
+ return bbdev;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BBDEV_VDEV_H_ */
diff --git a/lib/librte_bbdev/rte_bbdev_version.map
b/lib/librte_bbdev/rte_bbdev_version.map
new file mode 100644
index 0000000..1c9320a
--- /dev/null
+++ b/lib/librte_bbdev/rte_bbdev_version.map
@@ -0,0 +1,32 @@
+EXPERIMENTAL {
+ global:
+
+ rte_bbdev_allocate;
+ rte_bbdev_callback_register;
+ rte_bbdev_callback_unregister;
+ rte_bbdev_close;
+ rte_bbdev_configure;
+ rte_bbdev_count;
+ rte_bbdev_devices;
+ rte_bbdev_find_next;
+ rte_bbdev_get_named_dev;
+ rte_bbdev_info_get;
+ rte_bbdev_is_valid;
+ rte_bbdev_op_pool_create;
+ rte_bbdev_op_type_str;
+ rte_bbdev_pmd_callback_process;
+ rte_bbdev_queue_configure;
+ rte_bbdev_queue_info_get;
+ rte_bbdev_queue_intr_ctl;
+ rte_bbdev_queue_intr_disable;
+ rte_bbdev_queue_intr_enable;
+ rte_bbdev_queue_start;
+ rte_bbdev_queue_stop;
+ rte_bbdev_release;
+ rte_bbdev_start;
+ rte_bbdev_stats_get;
+ rte_bbdev_stats_reset;
+ rte_bbdev_stop;
+
+ local: *;
+};
\ No newline at end of file
--
2.7.4
