> -----Original Message-----
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Shahaf Shuler
> Sent: Monday, September 4, 2017 8:12 AM
> To: tho...@monjalon.net
> Cc: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH 4/4] ethdev: add helpers to move to the new
> offloads API
>
> A new offloads API was introduced by commits:
>
> commit 121fff673172 ("ethdev: introduce Rx queue offloads API")
> commit 35ac80d92f29 ("ethdev: introduce Tx queue offloads API")
>
> In order to enable the PMDs to support only one of the APIs,
> a conversion functions from the old to new API were added.
>
> Signed-off-by: Shahaf Shuler <shah...@mellanox.com>
> ---
> lib/librte_ether/rte_ethdev.c | 99 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 97 insertions(+), 2 deletions(-)
>
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index 50f8aa98d..1aa21a129 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -1006,6 +1006,34 @@ rte_eth_dev_close(uint8_t port_id)
> dev->data->tx_queues = NULL;
> }
>
> +/**
> + * A conversion function from rxmode offloads API to rte_eth_rxq_conf
> + * offloads API.
> + */
> +static void
> +rte_eth_convert_rxmode_offloads(struct rte_eth_rxmode *rxmode,
> + struct rte_eth_rxq_conf *rxq_conf)
> +{
I think you need to:
rxq_conf->offloads = 0;
first here.
> + if (rxmode->header_split == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_HEADER_SPLIT;
> + if (rxmode->hw_ip_checksum == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_CHECKSUM;
> + if (rxmode->hw_vlan_filter == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
> + if (rxmode->hw_vlan_strip == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
> + if (rxmode->hw_vlan_extend == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
> + if (rxmode->jumbo_frame == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
> + if (rxmode->hw_strip_crc == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
> + if (rxmode->enable_scatter == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_SCATTER;
> + if (rxmode->enable_lro == 1)
> + rxq_conf->offloads |= DEV_RX_OFFLOAD_TCP_LRO;
> +}
> +
> int
> rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
> uint16_t nb_rx_desc, unsigned int socket_id,
> @@ -1016,6 +1044,8 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t
> rx_queue_id,
> uint32_t mbp_buf_size;
> struct rte_eth_dev *dev;
> struct rte_eth_dev_info dev_info;
> + struct rte_eth_rxq_conf rxq_trans_conf;
> + /* Holds translated configuration to be passed to the PMD */
> void **rxq;
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
> @@ -1062,6 +1092,11 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t
> rx_queue_id,
> return -EINVAL;
> }
>
> + if ((!(dev->data->dev_flags & RTE_ETH_DEV_RXQ_OFFLOAD)) &&
> + (dev->data->dev_conf.rxmode.ignore_offloads == 1)) {
> + return -ENOTSUP;
> + }
> +
> if (nb_rx_desc > dev_info.rx_desc_lim.nb_max ||
> nb_rx_desc < dev_info.rx_desc_lim.nb_min ||
> nb_rx_desc % dev_info.rx_desc_lim.nb_align != 0) {
> @@ -1086,8 +1121,15 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t
> rx_queue_id,
> if (rx_conf == NULL)
> rx_conf = &dev_info.default_rxconf;
>
> + rxq_trans_conf = *rx_conf;
> + if ((dev->data->dev_flags & RTE_ETH_DEV_RXQ_OFFLOAD) &&
> + (dev->data->dev_conf.rxmode.ignore_offloads == 0)) {
> + rte_eth_convert_rxmode_offloads(&dev->data->dev_conf.rxmode,
> + &rxq_trans_conf);
> + }
> +
> ret = (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
> - socket_id, rx_conf, mp);
> + socket_id, &rxq_trans_conf, mp);
> if (!ret) {
> if (!dev->data->min_rx_buf_size ||
> dev->data->min_rx_buf_size > mbp_buf_size)
> @@ -1097,6 +1139,49 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t
> rx_queue_id,
> return ret;
> }
>
> +/**
> + * A conversion function from txq_flags to rte_eth_txq_conf offloads API.
> + */
> +static void
> +rte_eth_convert_txq_flags(struct rte_eth_txq_conf *txq_conf)
> +{
> + uint32_t txq_flags = txq_conf->txq_flags;
> + uint64_t *offloads = &txq_conf->offloads;
I think you need to:
*offloads = 0;
first here.
BTW, might be a bit cleaner:
uint64_t offloads;
offloads = 0;
<conversion code>
txq_conf->tx_offloads = offloads;
Konstantin
> +
> + if (!(txq_flags & ETH_TXQ_FLAGS_NOMULTSEGS))
> + *offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
> + if (!(txq_flags & ETH_TXQ_FLAGS_NOVLANOFFL))
> + *offloads |= DEV_TX_OFFLOAD_VLAN_INSERT;
> + if (!(txq_flags & ETH_TXQ_FLAGS_NOXSUMSCTP))
> + *offloads |= DEV_TX_OFFLOAD_SCTP_CKSUM;
> + if (!(txq_flags & ETH_TXQ_FLAGS_NOXSUMUDP))
> + *offloads |= DEV_TX_OFFLOAD_UDP_CKSUM;
> + if (!(txq_flags & ETH_TXQ_FLAGS_NOXSUMTCP))
> + *offloads |= DEV_TX_OFFLOAD_TCP_CKSUM;
> +}
> +
> +/**
> + * A conversion function between rte_eth_txq_conf offloads API to txq_flags
> + * offloads API.
> + */
> +static void
> +rte_eth_convert_txq_offloads(struct rte_eth_txq_conf *txq_conf)
> +{
> + uint32_t *txq_flags = &txq_conf->txq_flags;
> + uint64_t offloads = txq_conf->offloads;
> +
> + if (!(offloads & DEV_TX_OFFLOAD_MULTI_SEGS))
> + *txq_flags |= ETH_TXQ_FLAGS_NOMULTSEGS;
> + if (!(offloads & DEV_TX_OFFLOAD_VLAN_INSERT))
> + *txq_flags |= ETH_TXQ_FLAGS_NOVLANOFFL;
> + if (!(offloads & DEV_TX_OFFLOAD_SCTP_CKSUM))
> + *txq_flags |= ETH_TXQ_FLAGS_NOXSUMSCTP;
> + if (!(offloads & DEV_TX_OFFLOAD_UDP_CKSUM))
> + *txq_flags |= ETH_TXQ_FLAGS_NOXSUMUDP;
> + if (!(offloads & DEV_TX_OFFLOAD_TCP_CKSUM))
> + *txq_flags |= ETH_TXQ_FLAGS_NOXSUMTCP;
> +}
> +
> int
> rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
> uint16_t nb_tx_desc, unsigned int socket_id,
> @@ -1104,6 +1189,8 @@ rte_eth_tx_queue_setup(uint8_t port_id, uint16_t
> tx_queue_id,
> {
> struct rte_eth_dev *dev;
> struct rte_eth_dev_info dev_info;
> + struct rte_eth_txq_conf txq_trans_conf;
> + /* Holds translated configuration to be passed to the PMD */
> void **txq;
>
> RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
> @@ -1148,8 +1235,16 @@ rte_eth_tx_queue_setup(uint8_t port_id, uint16_t
> tx_queue_id,
> if (tx_conf == NULL)
> tx_conf = &dev_info.default_txconf;
>
> + txq_trans_conf = *tx_conf;
> + if ((dev->data->dev_flags & RTE_ETH_DEV_TXQ_OFFLOAD) &&
> + (!(tx_conf->txq_flags & ETH_TXQ_FLAGS_IGNORE)))
> + rte_eth_convert_txq_flags(&txq_trans_conf);
> + else if (!(dev->data->dev_flags & RTE_ETH_DEV_TXQ_OFFLOAD) &&
> + (tx_conf->txq_flags & ETH_TXQ_FLAGS_IGNORE))
> + rte_eth_convert_txq_offloads(&txq_trans_conf);
> +
> return (*dev->dev_ops->tx_queue_setup)(dev, tx_queue_id, nb_tx_desc,
> - socket_id, tx_conf);
> + socket_id, &txq_trans_conf);
> }
>
> void
> --
> 2.12.0
