x550 devices not do interrupt vector mapping before enable Rx/Tx queue interrupt, makes interrupt mode can't work neither with igb_uio or VFIO.
Fixes: d2e72774e58c ("ixgbe/base: support X550") Signed-off-by: Qiming Yang <qiming.y...@intel.com> --- v2 changes: * fixed other cause interrupt vector map and typo issue --- drivers/net/ixgbe/ixgbe_ethdev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 9b06ac1..0caafd5 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -5611,7 +5611,8 @@ ixgbe_set_ivar_map(struct ixgbe_hw *hw, int8_t direction, tmp |= (msix_vector << (8 * (queue & 0x3))); IXGBE_WRITE_REG(hw, IXGBE_IVAR(idx), tmp); } else if ((hw->mac.type == ixgbe_mac_82599EB) || - (hw->mac.type == ixgbe_mac_X540)) { + (hw->mac.type == ixgbe_mac_X540) || + (hw->mac.type == ixgbe_mac_X550)) { if (direction == -1) { /* other causes */ idx = ((queue & 1) * 8); @@ -5719,6 +5720,7 @@ ixgbe_configure_msix(struct rte_eth_dev *dev) break; case ixgbe_mac_82599EB: case ixgbe_mac_X540: + case ixgbe_mac_X550: ixgbe_set_ivar_map(hw, -1, 1, IXGBE_MISC_VEC_ID); break; default: -- 2.7.4