On 12/4/2016 6:17 PM, Hemant Agrawal wrote:
> Signed-off-by: Hemant Agrawal <hemant.agra...@nxp.com>
> ---
> config/defconfig_arm64-dpaa2-linuxapp-gcc | 2 +
> drivers/net/dpaa2/Makefile | 5 ++
> drivers/net/dpaa2/dpaa2_logs.h | 77
> +++++++++++++++++++++++++++++++
> 3 files changed, 84 insertions(+)
> create mode 100644 drivers/net/dpaa2/dpaa2_logs.h
>
> diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc
> b/config/defconfig_arm64-dpaa2-linuxapp-gcc
> index 00f207e..5ff884b 100644
> --- a/config/defconfig_arm64-dpaa2-linuxapp-gcc
> +++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
> @@ -45,3 +45,5 @@ CONFIG_RTE_MAX_NUMA_NODES=1
> # Compile software PMD backed by NXP DPAA2 files
> #
> CONFIG_RTE_LIBRTE_DPAA2_PMD=y
> +CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
> +CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
> diff --git a/drivers/net/dpaa2/Makefile b/drivers/net/dpaa2/Makefile
> index ab17143..3032708 100644
> --- a/drivers/net/dpaa2/Makefile
> +++ b/drivers/net/dpaa2/Makefile
> @@ -35,8 +35,13 @@ include $(RTE_SDK)/mk/rte.vars.mk
> #
> LIB = librte_pmd_dpaa2.a
>
> +ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
> +CFLAGS += -O0 -g
> +CFLAGS += "-Wno-error"
> +else
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +endif
>
> CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
> CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/
> diff --git a/drivers/net/dpaa2/dpaa2_logs.h b/drivers/net/dpaa2/dpaa2_logs.h
> new file mode 100644
> index 0000000..956a940
> --- /dev/null
> +++ b/drivers/net/dpaa2/dpaa2_logs.h
> @@ -0,0 +1,77 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright (c) 2015-2016 Freescale Semiconductor, Inc. All rights
> reserved.
> + * Copyright (c) 2016 NXP. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Freescale Semiconductor, Inc nor the names of
> its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _DPAA2_LOGS_H_
> +#define _DPAA2_LOGS_H_
> +
> +#define PMD_INIT_LOG(level, fmt, args...) \
> + RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
> +
> +#ifdef RTE_LIBRTE_DPAA2_DEBUG_INIT
> +#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
> +#else
> +#define PMD_INIT_FUNC_TRACE() do { } while (0)
> +#endif
> +
> +#ifdef RTE_LIBRTE_DPAA2_DEBUG_RX
What do you think adding these config option to the config file in this
patch?
> +#define PMD_RX_LOG(level, fmt, args...) \
> + RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +#else
> +#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
> +#endif
> +
> +#ifdef RTE_LIBRTE_DPAA2_DEBUG_TX
> +#define PMD_TX_LOG(level, fmt, args...) \
> + RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +#else
> +#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
> +#endif
> +
> +#ifdef RTE_LIBRTE_DPAA2_DEBUG_TX_FREE
This config option was not documented?
> +#define PMD_TX_FREE_LOG(level, fmt, args...) \
> + RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +#else
> +#define PMD_TX_FREE_LOG(level, fmt, args...) do { } while (0)
> +#endif
> +
> +#ifdef RTE_LIBRTE_DPAA2_DEBUG_DRIVER
> +#define PMD_DRV_LOG_RAW(level, fmt, args...) \
> + RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
> +#else
> +#define PMD_DRV_LOG_RAW(level, fmt, args...) do { } while (0)
> +#endif
> +
> +#define PMD_DRV_LOG(level, fmt, args...) \
> + PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
> +
> +#endif /* _DPAA2_LOGS_H_ */
>
