The "FW" PHY type now supports speeds 10M, 100M, and 1G. Previously,
only the 1G speed was reported in the
ixgbe_get_supported_physical_layer_X550em() function for this PHY type.
This patch is to add the 10M and 100M options.
Signed-off-by: Wei Dai <wei....@intel.com>
---
drivers/net/ixgbe/base/ixgbe_type.h | 1 +
drivers/net/ixgbe/base/ixgbe_x550.c | 8 +++++++-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_type.h
b/drivers/net/ixgbe/base/ixgbe_type.h
index 6ab466b..9851d84 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -3426,6 +3426,7 @@ typedef u32 ixgbe_physical_layer;
#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
#define IXGBE_PHYSICAL_LAYER_1000BASE_SX 0x4000
+#define IXGBE_PHYSICAL_LAYER_10BASE_T 0x8000
/* Flow Control Data Sheet defined values
* Calculation and defines taken from 802.1bb Annex O
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c
b/drivers/net/ixgbe/base/ixgbe_x550.c
index 0011f21..f1f1fbe 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -3784,7 +3784,13 @@ u32 ixgbe_get_supported_physical_layer_X550em(struct
ixgbe_hw *hw)
physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
break;
case ixgbe_phy_fw:
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_1GB_FULL)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_100_FULL)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+ if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_10_FULL)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10BASE_T;
+ break;
default:
break;
}
--
2.7.4
