This patch is needed for base driver support because the NW_MNG_IF_SEL
register fields are used to determine SGMII link for busy SGMII register
reads.
Signed-off-by: Wei Dai <wei....@intel.com>
---
drivers/net/ixgbe/base/ixgbe_x550.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c
b/drivers/net/ixgbe/base/ixgbe_x550.c
index c7ccd81..0011f21 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -2444,6 +2444,9 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
DEBUGFUNC("ixgbe_init_phy_ops_X550em");
+ hw->mac.ops.set_lan_id(hw);
+ ixgbe_read_mng_if_sel_x550em(hw);
+
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
ixgbe_setup_mux_ctl(hw);
@@ -2483,7 +2486,8 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
/* Identify the PHY or SFP module */
ret_val = phy->ops.identify(hw);
- if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED ||
+ ret_val == IXGBE_ERR_PHY_ADDR_INVALID)
return ret_val;
/* Setup function pointers based on detected hardware */
--
2.7.4
