> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Jingjing Wu
> Sent: Wednesday, January 27, 2016 9:50 AM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH v2 1/2] i40evf: allocate virtchnl cmd buffer for
> each vf
>
> Currently, i40evf PMD uses a global static buffer to send virtchnl command to
> host driver. It is shared by multi VFs.
> This patch changed to allocate virtchnl cmd buffer for each VF.
>
> Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
> ---
> drivers/net/i40e/i40e_ethdev.h | 2 +
> drivers/net/i40e/i40e_ethdev_vf.c | 181 +++++++++++++++-------------------
> ----
> 2 files changed, 74 insertions(+), 109 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_ethdev.h
> b/drivers/net/i40e/i40e_ethdev.h index 1f9792b..93122ad 100644
> --- a/drivers/net/i40e/i40e_ethdev.h
> +++ b/drivers/net/i40e/i40e_ethdev.h
> @@ -494,7 +494,9 @@ struct i40e_vf {
> bool link_up;
> bool vf_reset;
> volatile uint32_t pend_cmd; /* pending command not finished yet */
> + uint32_t cmd_retval; /* return value of the cmd response from PF */
> u16 pend_msg; /* flags indicates events from pf not handled yet */
> + uint8_t *aq_resp; /* buffer to store the adminq response from PF */
>
> /* VSI info */
> struct i40e_virtchnl_vf_resource *vf_res; /* All VSIs */ diff --git
> a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
> index 14d2a50..64e6957 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -103,9 +103,6 @@ enum i40evf_aq_result {
> I40EVF_MSG_CMD, /* Read async command result */
> };
>
> -/* A share buffer to store the command result from PF driver */ -static
> uint8_t cmd_result_buffer[I40E_AQ_BUF_SZ];
> -
> static int i40evf_dev_configure(struct rte_eth_dev *dev); static int
> i40evf_dev_start(struct rte_eth_dev *dev); static void
> i40evf_dev_stop(struct rte_eth_dev *dev); @@ -237,31 +234,39 @@
> i40evf_set_mac_type(struct i40e_hw *hw) }
>
> /*
> - * Parse admin queue message.
> - *
> - * return value:
> - * < 0: meet error
> - * 0: read sys msg
> - * > 0: read cmd result
> + * Read data in admin queue to get msg from pf driver
> */
> static enum i40evf_aq_result
> -i40evf_parse_pfmsg(struct i40e_vf *vf,
> - struct i40e_arq_event_info *event,
> - struct i40evf_arq_msg_info *data)
> +i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info
> +*data)
> {
> - enum i40e_virtchnl_ops opcode = (enum i40e_virtchnl_ops)\
> - rte_le_to_cpu_32(event->desc.cookie_high);
> - enum i40e_status_code retval = (enum i40e_status_code)\
> - rte_le_to_cpu_32(event->desc.cookie_low);
> - enum i40evf_aq_result ret = I40EVF_MSG_CMD;
> + struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> + struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> + struct i40e_arq_event_info event;
> + enum i40e_virtchnl_ops opcode;
> + enum i40e_status_code retval;
> + int ret;
> + enum i40evf_aq_result result = I40EVF_MSG_NON;
>
> + event.buf_len = data->buf_len;
> + event.msg_buf = data->msg;
> + ret = i40e_clean_arq_element(hw, &event, NULL);
> + /* Can't read any msg from adminQ */
> + if (ret) {
> + if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
> + result = I40EVF_MSG_NON;
> + else
> + result = I40EVF_MSG_ERR;
> + return result;
> + }
> +
> + opcode = (enum
> i40e_virtchnl_ops)rte_le_to_cpu_32(event.desc.cookie_high);
> + retval = (enum
> +i40e_status_code)rte_le_to_cpu_32(event.desc.cookie_low);
> /* pf sys event */
> if (opcode == I40E_VIRTCHNL_OP_EVENT) {
> struct i40e_virtchnl_pf_event *vpe =
> - (struct i40e_virtchnl_pf_event *)event->msg_buf;
> + (struct i40e_virtchnl_pf_event *)event.msg_buf;
>
> - /* Initialize ret to sys event */
> - ret = I40EVF_MSG_SYS;
> + result = I40EVF_MSG_SYS;
> switch (vpe->event) {
> case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
> vf->link_up =
> @@ -286,74 +291,17 @@ i40evf_parse_pfmsg(struct i40e_vf *vf,
> }
> } else {
> /* async reply msg on command issued by vf previously */
> - ret = I40EVF_MSG_CMD;
> + result = I40EVF_MSG_CMD;
> /* Actual data length read from PF */
> - data->msg_len = event->msg_len;
> + data->msg_len = event.msg_len;
> }
> - /* fill the ops and result to notify VF */
> +
> data->result = retval;
> data->ops = opcode;
>
> - return ret;
> -}
> -
> -/*
> - * Read data in admin queue to get msg from pf driver
> - */
> -static enum i40evf_aq_result
> -i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info
> *data) -{
> - struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> - struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> - struct i40e_arq_event_info event;
> - int ret;
> - enum i40evf_aq_result result = I40EVF_MSG_NON;
> -
> - event.buf_len = data->buf_len;
> - event.msg_buf = data->msg;
> - ret = i40e_clean_arq_element(hw, &event, NULL);
> - /* Can't read any msg from adminQ */
> - if (ret) {
> - if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
> - result = I40EVF_MSG_NON;
> - else
> - result = I40EVF_MSG_ERR;
> - return result;
> - }
> -
> - /* Parse the event */
> - result = i40evf_parse_pfmsg(vf, &event, data);
> -
> return result;
> }
>
> -/*
> - * Polling read until command result return from pf driver or meet error.
> - */
> -static int
> -i40evf_wait_cmd_done(struct rte_eth_dev *dev,
> - struct i40evf_arq_msg_info *data)
> -{
> - int i = 0;
> - enum i40evf_aq_result ret;
> -
> -#define MAX_TRY_TIMES 20
> -#define ASQ_DELAY_MS 100
> - do {
> - /* Delay some time first */
> - rte_delay_ms(ASQ_DELAY_MS);
> - ret = i40evf_read_pfmsg(dev, data);
> - if (ret == I40EVF_MSG_CMD)
> - return 0;
> - else if (ret == I40EVF_MSG_ERR)
> - return -1;
> -
> - /* If don't read msg or read sys event, continue */
> - } while(i++ < MAX_TRY_TIMES);
> -
> - return -1;
> -}
> -
> /**
> * clear current command. Only call in case execute
> * _atomic_set_cmd successfully.
> @@ -380,13 +328,18 @@ _atomic_set_cmd(struct i40e_vf *vf, enum
> i40e_virtchnl_ops ops)
> return !ret;
> }
>
> +#define MAX_TRY_TIMES 20
> +#define ASQ_DELAY_MS 100
> +
> static int
> i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
> {
> struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
> - int err = -1;
> struct i40evf_arq_msg_info info;
> + enum i40evf_aq_result ret;
> + int err = -1;
> + int i = 0;
>
> if (_atomic_set_cmd(vf, args->ops))
> return -1;
> @@ -404,19 +357,22 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev,
> struct vf_cmd_info *args)
> return err;
> }
>
> - err = i40evf_wait_cmd_done(dev, &info);
> - /* read message and it's expected one */
> - if (!err && args->ops == info.ops)
> - _clear_cmd(vf);
> - else if (err) {
> - PMD_DRV_LOG(ERR, "Failed to read message from
> AdminQ");
> - _clear_cmd(vf);
> - }
> - else if (args->ops != info.ops)
> - PMD_DRV_LOG(ERR, "command mismatch, expect %u,
> get %u",
> - args->ops, info.ops);
> + do {
> + /* Delay some time first */
> + rte_delay_ms(ASQ_DELAY_MS);
> + ret = i40evf_read_pfmsg(dev, &info);
> + if (ret == I40EVF_MSG_CMD) {
> + err = 0;
> + break;
> + } else if (ret == I40EVF_MSG_ERR) {
> + err = -1;
> + break;
> + }
> + /* If don't read msg or read sys event, continue */
> + } while (i++ < MAX_TRY_TIMES);
> + _clear_cmd(vf);
>
> - return (err | info.result);
> + return (err | vf->cmd_retval);
> }
>
Why combine the i40evf_parse_pfmsg and i40evf_read_pfmsg into one function
i40evf_read_pfmsg?
