Introducing below api for pci bar space rd/wr. Currently used for
pci iobar rd/wr.
Api's are:
- rte_eal_pci_read_bar
- rte_eal_pci_write_bar
virtio when used for vfio-mode then virtio driver will use these api
to do rd/wr operation on ioport pci bar.
Signed-off-by: Santosh Shukla <sshukla at mvista.com>
---
lib/librte_eal/common/include/rte_pci.h | 38 ++++++++++++++++++++++++++++
lib/librte_eal/linuxapp/eal/eal_pci.c | 28 ++++++++++++++++++++
lib/librte_eal/linuxapp/eal/eal_pci_init.h | 6 +++++
lib/librte_eal/linuxapp/eal/eal_pci_vfio.c | 28 ++++++++++++++++++++
4 files changed, 100 insertions(+)
diff --git a/lib/librte_eal/common/include/rte_pci.h
b/lib/librte_eal/common/include/rte_pci.h
index 334c12e..53437cc 100644
--- a/lib/librte_eal/common/include/rte_pci.h
+++ b/lib/librte_eal/common/include/rte_pci.h
@@ -471,6 +471,44 @@ int rte_eal_pci_read_config(const struct rte_pci_device
*device,
void *buf, size_t len, off_t offset);
/**
+ * Read PCI bar space.
+ *
+ * @param device
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ * @param buf
+ * A data buffer where the bytes should be read into
+ * @param len
+ * The length of the data buffer.
+ * @param offset
+ * The offset into PCI bar space
+ * @param bar_idx
+ * The pci bar index (valid range is 0..5)
+ */
+int rte_eal_pci_read_bar(const struct rte_pci_device *device,
+ void *buf, size_t len, off_t offset, int bar_idx);
+
+/**
+ * Write PCI bar space.
+ *
+ * @param device
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ * @param buf
+ * A data buffer containing the bytes should be written
+ * @param len
+ * The length of the data buffer.
+ * @param offset
+ * The offset into PCI config space
+ * @param bar_idx
+ * The pci bar index (valid range is 0..5)
+*/
+int rte_eal_pci_write_bar(const struct rte_pci_device *device,
+ const void *buf, size_t len, off_t offset,
+ int bar_idx);
+
+
+/**
* Write PCI config space.
*
* @param device
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c
b/lib/librte_eal/linuxapp/eal/eal_pci.c
index bc5b5be..22d3321 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -621,6 +621,34 @@ int rte_eal_pci_write_config(const struct rte_pci_device
*device,
}
}
+int rte_eal_pci_read_bar(const struct rte_pci_device *device __rte_unused,
+ void *buf __rte_unused,
+ size_t len __rte_unused,
+ off_t offset __rte_unused,
+ int bar_idx __rte_unused)
+{
+#ifdef VFIO_PRESENT
+ const struct rte_intr_handle *intr_handle = &device->intr_handle;
+ return pci_vfio_read_bar(intr_handle, buf, len, offset, bar_idx);
+#else
+ return 0; /* UIO's not applicable */
+#endif
+}
+
+int rte_eal_pci_write_bar(const struct rte_pci_device *device __rte_unused,
+ const void *buf __rte_unused,
+ size_t len __rte_unused,
+ off_t offset __rte_unused,
+ int bar_idx __rte_unused)
+{
+#ifdef VFIO_PRESENT
+ const struct rte_intr_handle *intr_handle = &device->intr_handle;
+ return pci_vfio_write_bar(intr_handle, buf, len, offset, bar_idx);
+#else
+ return 0; /* UIO's not applicable */
+#endif
+}
+
/* Init the PCI EAL subsystem */
int
rte_eal_pci_init(void)
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_init.h
b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
index a17c708..3bc592b 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_init.h
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
@@ -68,6 +68,12 @@ int pci_vfio_read_config(const struct rte_intr_handle
*intr_handle,
int pci_vfio_write_config(const struct rte_intr_handle *intr_handle,
const void *buf, size_t len, off_t offs);
+int pci_vfio_read_bar(const struct rte_intr_handle *intr_handle,
+ void *buf, size_t len, off_t offs, int bar_idx);
+
+int pci_vfio_write_bar(const struct rte_intr_handle *intr_handle,
+ const void *buf, size_t len, off_t offs, int bar_idx);
+
/* map VFIO resource prototype */
int pci_vfio_map_resource(struct rte_pci_device *dev);
int pci_vfio_get_group_fd(int iommu_group_fd);
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
index 4077eb6..7ec203c 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
@@ -93,6 +93,34 @@ pci_vfio_write_config(const struct rte_intr_handle
*intr_handle,
VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + offs);
}
+int
+pci_vfio_read_bar(const struct rte_intr_handle *intr_handle,
+ void *buf, size_t len, off_t offs, int bar_idx)
+{
+ if (bar_idx < VFIO_PCI_BAR0_REGION_INDEX
+ || bar_idx > VFIO_PCI_BAR5_REGION_INDEX) {
+ RTE_LOG(ERR, EAL, "invalid bar_idx!\n");
+ return -1;
+ }
+
+ return pread64(intr_handle->vfio_dev_fd, buf, len,
+ VFIO_GET_REGION_ADDR(bar_idx) + offs);
+}
+
+int
+pci_vfio_write_bar(const struct rte_intr_handle *intr_handle,
+ const void *buf, size_t len, off_t offs, int bar_idx)
+{
+ if (bar_idx < VFIO_PCI_BAR0_REGION_INDEX
+ || bar_idx > VFIO_PCI_BAR5_REGION_INDEX) {
+ RTE_LOG(ERR, EAL, "invalid bar_idx!\n");
+ return -1;
+ }
+
+ return pwrite64(intr_handle->vfio_dev_fd, buf, len,
+ VFIO_GET_REGION_ADDR(bar_idx) + offs);
+}
+
/* get PCI BAR number where MSI-X interrupts are */
static int
pci_vfio_get_msix_bar(int fd, int *msix_bar, uint32_t *msix_table_offset,
--
1.7.9.5
