Update driver to use new AESNI Multibuffer IPSec library single
operation functionality (cipher only and authentication only).
This patch also adds tests for this new feature.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch at intel.com>
---
app/test/test_cryptodev.c | 34 ++++++++++++++++++++
app/test/test_cryptodev_aes_test_vectors.h | 36 ++++++++++++++-------
app/test/test_cryptodev_hash_test_vectors.h | 36 ++++++++++++++-------
doc/guides/cryptodevs/aesni_mb.rst | 2 --
doc/guides/rel_notes/release_17_02.rst | 1 +
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 49 +++++++++++++++++++----------
6 files changed, 116 insertions(+), 42 deletions(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index f1f3542..5895d99 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -1466,6 +1466,38 @@ test_AES_CBC_HMAC_SHA512_decrypt_perform(struct
rte_cryptodev_sym_session *sess,
}
static int
+test_AES_cipheronly_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_AESNI_MB_PMD,
+ BLKCIPHER_AES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_authonly_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_AESNI_MB_PMD,
+ BLKCIPHER_AUTHONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_AES_chain_mb_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -6559,6 +6591,8 @@ static struct unit_test_suite
cryptodev_aesni_mb_testsuite = {
.teardown = testsuite_teardown,
.unit_test_cases = {
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_chain_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown, test_AES_cipheronly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown, test_authonly_mb_all),
TEST_CASES_END() /**< NULL terminate unit test array */
}
diff --git a/app/test/test_cryptodev_aes_test_vectors.h
b/app/test/test_cryptodev_aes_test_vectors.h
index efbe7da..898aae1 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -1025,84 +1025,96 @@ static const struct blockcipher_test_case
aes_cipheronly_test_cases[] = {
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-128-CBC Decryption",
.test_data = &aes_test_data_4,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-192-CBC Encryption",
.test_data = &aes_test_data_10,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-192-CBC Decryption",
.test_data = &aes_test_data_10,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-256-CBC Encryption",
.test_data = &aes_test_data_11,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-256-CBC Decryption",
.test_data = &aes_test_data_11,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-128-CTR Encryption",
.test_data = &aes_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-128-CTR Decryption",
.test_data = &aes_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-192-CTR Encryption",
.test_data = &aes_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-192-CTR Decryption",
.test_data = &aes_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-256-CTR Encryption",
.test_data = &aes_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "AES-256-CTR Decryption",
.test_data = &aes_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
};
diff --git a/app/test/test_cryptodev_hash_test_vectors.h
b/app/test/test_cryptodev_hash_test_vectors.h
index 9f095cf..a897de4 100644
--- a/app/test/test_cryptodev_hash_test_vectors.h
+++ b/app/test/test_cryptodev_hash_test_vectors.h
@@ -358,13 +358,15 @@ static const struct blockcipher_test_case
hash_test_cases[] = {
.test_descr = "HMAC-MD5 Digest",
.test_data = &hmac_md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "HMAC-MD5 Digest Verify",
.test_data = &hmac_md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "SHA1 Digest",
@@ -382,13 +384,15 @@ static const struct blockcipher_test_case
hash_test_cases[] = {
.test_descr = "HMAC-SHA1 Digest",
.test_data = &hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "HMAC-SHA1 Digest Verify",
.test_data = &hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "SHA224 Digest",
@@ -406,13 +410,15 @@ static const struct blockcipher_test_case
hash_test_cases[] = {
.test_descr = "HMAC-SHA224 Digest",
.test_data = &hmac_sha224_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "HMAC-SHA224 Digest Verify",
.test_data = &hmac_sha224_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "SHA256 Digest",
@@ -430,13 +436,15 @@ static const struct blockcipher_test_case
hash_test_cases[] = {
.test_descr = "HMAC-SHA256 Digest",
.test_data = &hmac_sha256_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "HMAC-SHA256 Digest Verify",
.test_data = &hmac_sha256_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "SHA384 Digest",
@@ -454,13 +462,15 @@ static const struct blockcipher_test_case
hash_test_cases[] = {
.test_descr = "HMAC-SHA384 Digest",
.test_data = &hmac_sha384_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "HMAC-SHA384 Digest Verify",
.test_data = &hmac_sha384_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "SHA512 Digest",
@@ -478,13 +488,15 @@ static const struct blockcipher_test_case
hash_test_cases[] = {
.test_descr = "HMAC-SHA512 Digest",
.test_data = &hmac_sha512_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "HMAC-SHA512 Digest Verify",
.test_data = &hmac_sha512_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
};
diff --git a/doc/guides/cryptodevs/aesni_mb.rst
b/doc/guides/cryptodevs/aesni_mb.rst
index b47cb6a..cb429d7 100644
--- a/doc/guides/cryptodevs/aesni_mb.rst
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -62,8 +62,6 @@ Limitations
-----------
* Chained mbufs are not supported.
-* Hash only is not supported.
-* Cipher only is not supported.
* Only in-place is currently supported (destination address is the same as
source address).
* Only supports session-oriented API implementation (session-less APIs are not
supported).
diff --git a/doc/guides/rel_notes/release_17_02.rst
b/doc/guides/rel_notes/release_17_02.rst
index 4f666df..5aa8a94 100644
--- a/doc/guides/rel_notes/release_17_02.rst
+++ b/doc/guides/rel_notes/release_17_02.rst
@@ -49,6 +49,7 @@ New Features
* The Intel(R) Multi Buffer Crypto for IPsec library used in
AESNI MB PMD has been moved to a new repository, in github.
+ * Support for single operations (cipher only and authentication only).
Resolved Issues
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
index f07cd07..7591cc5 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -110,21 +110,22 @@ calculate_auth_precomputes(hash_one_block_t
one_block_hash,
static int
aesni_mb_get_chain_order(const struct rte_crypto_sym_xform *xform)
{
- /*
- * Multi-buffer only supports HASH_CIPHER or CIPHER_HASH chained
- * operations, all other options are invalid, so we must have exactly
- * 2 xform structs chained together
- */
- if (xform->next == NULL || xform->next->next != NULL)
+ if (xform == NULL)
return -1;
- if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
- xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER)
- return HASH_CIPHER;
-
- if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
- xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+ if ((xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) &&
+ (xform->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) &&
+ ((xform->next == NULL) ||
+ (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)))
return CIPHER_HASH;
+ if ((xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) &&
+ (xform->cipher.op == RTE_CRYPTO_CIPHER_OP_DECRYPT) &&
+ (xform->next == NULL))
+ return HASH_CIPHER;
+ if ((xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) &&
+ (xform->next == NULL ||
+ xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER))
+ return HASH_CIPHER;
return -1;
}
@@ -137,6 +138,11 @@ aesni_mb_set_session_auth_parameters(const struct
aesni_mb_ops *mb_ops,
{
hash_one_block_t hash_oneblock_fn;
+ if (xform == NULL) {
+ sess->auth.algo = NULL_HASH;
+ return 0;
+ }
+
if (xform->type != RTE_CRYPTO_SYM_XFORM_AUTH) {
MB_LOG_ERR("Crypto xform struct not of type auth");
return -1;
@@ -199,6 +205,11 @@ aesni_mb_set_session_cipher_parameters(const struct
aesni_mb_ops *mb_ops,
{
aes_keyexp_t aes_keyexp_fn;
+ if (xform == NULL) {
+ sess->cipher.mode = NULL_CIPHER;
+ return 0;
+ }
+
if (xform->type != RTE_CRYPTO_SYM_XFORM_CIPHER) {
MB_LOG_ERR("Crypto xform struct not of type cipher");
return -1;
@@ -270,8 +281,13 @@ aesni_mb_set_session_parameters(const struct aesni_mb_ops
*mb_ops,
switch (aesni_mb_get_chain_order(xform)) {
case HASH_CIPHER:
sess->chain_order = HASH_CIPHER;
- auth_xform = xform;
- cipher_xform = xform->next;
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+ auth_xform = xform;
+ cipher_xform = xform->next;
+ } else {
+ cipher_xform = xform;
+ auth_xform = xform->next;
+ }
break;
case CIPHER_HASH:
sess->chain_order = CIPHER_HASH;
@@ -396,7 +412,7 @@ process_crypto_op(struct aesni_mb_qp *qp, struct
rte_crypto_op *op,
}
/* Set digest output location */
- if (job->cipher_direction == DECRYPT) {
+ if (job->cipher_direction == DECRYPT && job->hash_alg != NULL_HASH) {
job->auth_tag_output = (uint8_t *)rte_pktmbuf_append(m_dst,
get_digest_byte_length(job->hash_alg));
@@ -471,7 +487,8 @@ post_process_mb_job(struct aesni_mb_qp *qp, JOB_AES_HMAC
*job)
return op;
} else if (job->chain_order == HASH_CIPHER) {
/* Verify digest if required */
- if (memcmp(job->auth_tag_output, op->sym->auth.digest.data,
+ if (job->hash_alg != NULL_HASH && memcmp(job->auth_tag_output,
+ op->sym->auth.digest.data,
job->auth_tag_output_len_in_bytes) != 0)
op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
--
2.7.4
