On Wed, 23 Apr 2025 19:59:17 +0400 Ivan Malov <ivan.ma...@arknetworks.am> wrote:
> New X4522 (dual port SFP56) and X4542 (dual port QSFP56) adaptors are > Medford4 (X4) chips that are based on EF10 architecture. An X4 NIC > supports multiple network engine types. This series provides support > only for the Medford2-alike, 'full-feature' (FF) network engine. This > shall not be confused with the concept of 'datapath FW variants': the > FF network engine supports both 'full-feature' and 'ultra-low-latency' > datapath FW variants, with corresponding Medford2-alike feature sets. > > The first part of the series provides general support for the adaptors, > whilst the second one adds support for the new management controller > interface for configuration of network port features (netport MCDI). > > For now, only support for physical functions (PFs) is concerned. There > is a small number of TODO and FIXME markings in the code. Those are > normal at this development stage and will be removed by future patches > when VF support has fleshed out. > > v2: > - squashed respective parts of commit [1] into commits [2] and [3] > - dropped irrelevant TODO and FIXME markings from the patches > - applied review notes and tested build in FreeBSD14-64 > > [1] https://mails.dpdk.org/archives/dev/2025-April/317109.html > [2] https://mails.dpdk.org/archives/dev/2025-April/317096.html > [3] https://mails.dpdk.org/archives/dev/2025-April/317098.html > > > Andy Moreton (2): > net/sfc: add Medford4 with only full feature datapath engine > common/sfc_efx/base: add port mode for 8 port hardware > > Denis Pryazhennikov (15): > common/sfc_efx/base: add Medford4 PCI IDs to common code > common/sfc_efx/base: add efsys option for Medford4 > common/sfc_efx/base: add Medford4 support to NIC module > common/sfc_efx/base: add Medford4 support to EV module > common/sfc_efx/base: add Medford4 support to FILTER module > common/sfc_efx/base: add Medford4 support to INTR module > common/sfc_efx/base: add Medford4 support to MAC module > common/sfc_efx/base: add Medford4 support to PHY module > common/sfc_efx/base: add Medford4 support to TUNNEL module > common/sfc_efx/base: add Medford4 support to MCDI module > common/sfc_efx/base: add Medford4 support to Rx module > common/sfc_efx/base: add Medford4 support to Tx module > drivers: enable support for AMD Solarflare X4 adapter family > common/sfc_efx/base: add new X4 port mode > common/sfc_efx/base: extend list of supported X4 port modes > > Ivan Malov (28): > common/sfc_efx/base: update MCDI headers > common/sfc_efx/base: provide a stub for basic netport attach > common/sfc_efx/base: provide defaults on netport attach path > common/sfc_efx/base: obtain assigned netport handle from NIC > common/sfc_efx/base: allow for const in MCDI struct accessor > common/sfc_efx/base: get netport fixed capabilities on probe > common/sfc_efx/base: decode netport link state on probe path > common/sfc_efx/base: fill in loopback modes on netport probe > common/sfc_efx/base: introduce Medford4 stub for PHY methods > common/sfc_efx/base: refactor EF10 link mode decoding helper > common/sfc_efx/base: provide PHY link get method on Medford4 > common/sfc_efx/base: implement PHY link control for Medford4 > common/sfc_efx/base: introduce Medford4 stub for MAC methods > common/sfc_efx/base: add MAC reconfigure method for Medford4 > common/sfc_efx/base: fill in software LUT for MAC statistics > common/sfc_efx/base: fill in MAC statistics mask on Medford4 > common/sfc_efx/base: support MAC statistics on Medford4 NICs > common/sfc_efx/base: implement MAC PDU controls for Medford4 > common/sfc_efx/base: correct MAC PDU calculation on Medford4 > net/sfc: make use of generic EFX MAC PDU calculation helpers > common/sfc_efx/base: ignore legacy link events on new boards > common/sfc_efx/base: add link event processing on new boards > net/sfc: query link status on link change events on new NICs > common/sfc_efx/base: subscribe to netport link change events > net/sfc: offer support for 200G link ability on new adaptors > common/sfc_efx/base: support controls for netport lane count > net/sfc: add support for control of physical port lane count > doc: advertise support for AMD Solarflare X45xx adapters > > .mailmap | 3 +- > doc/guides/nics/sfc_efx.rst | 9 +- > doc/guides/rel_notes/release_25_07.rst | 4 + > drivers/common/sfc_efx/base/ef10_ev.c | 39 + > drivers/common/sfc_efx/base/ef10_impl.h | 19 + > drivers/common/sfc_efx/base/ef10_nic.c | 93 +- > drivers/common/sfc_efx/base/ef10_phy.c | 43 +- > drivers/common/sfc_efx/base/ef10_tlv_layout.h | 9 +- > drivers/common/sfc_efx/base/efx.h | 98 +- > drivers/common/sfc_efx/base/efx_check.h | 25 +- > drivers/common/sfc_efx/base/efx_ev.c | 6 + > drivers/common/sfc_efx/base/efx_filter.c | 6 + > drivers/common/sfc_efx/base/efx_impl.h | 115 +- > drivers/common/sfc_efx/base/efx_intr.c | 6 + > drivers/common/sfc_efx/base/efx_mac.c | 56 +- > drivers/common/sfc_efx/base/efx_mcdi.c | 18 +- > drivers/common/sfc_efx/base/efx_mcdi.h | 2 +- > drivers/common/sfc_efx/base/efx_nic.c | 60 + > drivers/common/sfc_efx/base/efx_np.c | 1591 +++++ > drivers/common/sfc_efx/base/efx_phy.c | 88 +- > drivers/common/sfc_efx/base/efx_port.c | 1 + > drivers/common/sfc_efx/base/efx_regs_mcdi.h | 5868 ++++++++++++++++- > drivers/common/sfc_efx/base/efx_rx.c | 6 + > drivers/common/sfc_efx/base/efx_tunnel.c | 18 +- > drivers/common/sfc_efx/base/efx_tx.c | 33 + > drivers/common/sfc_efx/base/medford4_impl.h | 105 + > drivers/common/sfc_efx/base/medford4_mac.c | 286 + > drivers/common/sfc_efx/base/medford4_phy.c | 156 + > drivers/common/sfc_efx/base/meson.build | 3 + > drivers/common/sfc_efx/efsys.h | 2 + > drivers/common/sfc_efx/sfc_base_symbols.c | 2 + > drivers/net/sfc/sfc.c | 5 +- > drivers/net/sfc/sfc.h | 4 + > drivers/net/sfc/sfc_dp_tx.h | 3 + > drivers/net/sfc/sfc_ef10_tx.c | 13 +- > drivers/net/sfc/sfc_ethdev.c | 186 +- > drivers/net/sfc/sfc_ev.c | 51 +- > drivers/net/sfc/sfc_port.c | 27 +- > drivers/net/sfc/sfc_repr.c | 7 +- > drivers/net/sfc/sfc_repr.h | 1 + > drivers/net/sfc/sfc_tx.c | 2 + > 41 files changed, 8944 insertions(+), 125 deletions(-) > create mode 100644 drivers/common/sfc_efx/base/efx_np.c > create mode 100644 drivers/common/sfc_efx/base/medford4_impl.h > create mode 100644 drivers/common/sfc_efx/base/medford4_mac.c > create mode 100644 drivers/common/sfc_efx/base/medford4_phy.c > Applied to next-net. Resisted the urge to just squash all the patches together..
