Hi, Arthas Does testpmd run OK, and what is boot parameter you used to boot Tile-Gx?
>-----Original Message----- >From: Arthas [mailto:kangzy1982 at qq.com] >Sent: Wednesday, September 23, 2015 1:21 PM >To: dev >Cc: zlu >Subject: Re: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >and I wrote a sample RX example, got an other information. > > >PMD: xgbe1: Could not register memseg @0x1ffd2000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff41000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff3e000000, -1111. >PMD: xgbe1: Could not register memseg @0x1ff2d000000, -1111. >PMD: xgbe1: Could not register memseg @0x1fee6000000, -1111. >PMD: xgbe1: Could not register memseg @0x1fee3000000, -1111. >PMD: xgbe1: Buffer stack memory 0x1fee4b90000 - 0x1fee4be557f. >PMD: xgbe1: eDMA ring memory 0x1fee4bf0000 - 0x1fee4bf1fff. >PMD: xgbe1: iDMA ring 0 memory 0x1fee4bec000 - 0x1fee4bedfff. > > > > Regards, Arthas > >------------------ Original ------------------ >From: "Arthas";<kangzy1982 at qq.com>; >Date: Wed, Sep 23, 2015 01:17 PM >To: "dev"<dev at dpdk.org>; >Subject: [dpdk-dev] DPDK v2.1.0 tilegx on TileraMDE-4.2.2.169597 > >Hi, I'm working on tilegx platform. and I wrote a sample dpdk trafgen for tilegx. >But I got a error with rte_mbuf rte_pktmbuf_append. > >PANIC in rte_mbuf_sanity_check(): >bad phys addr >7: [/trafgen(_start+0x70) [0x100b308]] >6: [/lib/libc.so.6(__libc_start_main+0x200) [0x1fff7a6e4c8]] >5: [/trafgen(main+0x2148) [0x1017b78]] >4: [/trafgen(rte_pktmbuf_dump+0x58) [0x102c7a8]] >3: [/trafgen(rte_mbuf_sanity_check+0x1a8) [0x102c700]] >2: [/trafgen(__rte_panic+0xc0) [0x1091e80]] >1: [/trafgen(rte_dump_stack+0x40) [0x104cf00]] > > >DPDK compiled with CONFIG_RTE_LIBRTE_MBUF_DEBUG=y! > > Regards, Arthas
