From: Ian Stokes <ian.sto...@intel.com>
Preparing a port for timesync command procedure shall provide Rx type which
indicates the type for the Rx metadata in the ONPI interface. According to the
documentation, Rx type should always equal 0x18.
Signed-off-by: Tomaszx Wakula <tomaszx.wak...@intel.com>
Signed-off-by: Ian Stokes <ian.sto...@intel.com>
---
drivers/net/ice/base/ice_ptp_hw.c | 4 ++--
drivers/net/ice/base/ice_ptp_hw.h | 3 +++
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ice/base/ice_ptp_hw.c
b/drivers/net/ice/base/ice_ptp_hw.c
index c01d0c8045..52a6178fd4 100644
--- a/drivers/net/ice/base/ice_ptp_hw.c
+++ b/drivers/net/ice/base/ice_ptp_hw.c
@@ -3255,8 +3255,8 @@ ice_ptp_write_port_cmd_e822(struct ice_hw *hw, u8 port,
}
/* Rx case */
- err = ice_write_phy_reg_e822_lp(hw, port, P_REG_RX_TMR_CMD, val,
- lock_sbq);
+ err = ice_write_phy_reg_e822_lp(hw, port, P_REG_RX_TMR_CMD,
+ val | TS_CMD_RX_TYPE, lock_sbq);
if (err) {
ice_debug(hw, ICE_DBG_PTP, "Failed to write back RX_TMR_CMD,
err %d\n",
err);
diff --git a/drivers/net/ice/base/ice_ptp_hw.h
b/drivers/net/ice/base/ice_ptp_hw.h
index 0da20e6758..b1a53e7252 100644
--- a/drivers/net/ice/base/ice_ptp_hw.h
+++ b/drivers/net/ice/base/ice_ptp_hw.h
@@ -329,6 +329,9 @@ int ice_ptp_init_phy_cfg(struct ice_hw *hw);
#define TS_CMD_MASK_E810 0xFF
#define TS_CMD_MASK 0xF
#define SYNC_EXEC_CMD 0x3
+#define TS_CMD_RX_TYPE_S 0x4
+#define TS_CMD_RX_TYPE MAKEMASK(0x18, TS_CMD_RX_TYPE_S)
+
/* Macros to derive port low and high addresses on both quads */
#define P_Q0_L(a, p) ((((a) + (0x2000 * (p)))) & 0xFFFF)
--
2.43.0
