In the event of a change in AXGBE mode, the current auto-negotiation
needs to be reset and the AN cycle needs to be re-triggered. However,
the current code ignores the return value of axgbe_set_mode(), leading to
false information as the link is declared without checking the status
register.

Fix this by propagating the mode switch status information to
axgbe_phy_status().

Fixes: 102b6ec3d5c3 ("net/axgbe: support auto-negotiation for 1Gbps")
Cc: sta...@dpdk.org

Signed-off-by: Venkat Kumar Ande <venkatkumar.a...@amd.com>
---
 drivers/net/axgbe/axgbe_mdio.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_mdio.c b/drivers/net/axgbe/axgbe_mdio.c
index 9fe30e83bc..130a67479e 100644
--- a/drivers/net/axgbe/axgbe_mdio.c
+++ b/drivers/net/axgbe/axgbe_mdio.c
@@ -1028,7 +1028,7 @@ static enum axgbe_mode axgbe_phy_status_aneg(struct 
axgbe_port *pdata)
        return pdata->phy_if.phy_impl.an_outcome(pdata);
 }
 
-static void axgbe_phy_status_result(struct axgbe_port *pdata)
+static bool axgbe_phy_status_result(struct axgbe_port *pdata)
 {
        enum axgbe_mode mode;
 
@@ -1065,8 +1065,13 @@ static void axgbe_phy_status_result(struct axgbe_port 
*pdata)
 
        pdata->phy.duplex = DUPLEX_FULL;
 
-       if (axgbe_set_mode(pdata, mode) && pdata->an_again)
+       if (!axgbe_set_mode(pdata, mode))
+               return false;
+
+       if (pdata->an_again)
                axgbe_phy_reconfig_aneg(pdata);
+
+       return true;
 }
 
 static int autoneg_time_out(unsigned long autoneg_start_time)
@@ -1133,7 +1138,10 @@ static void axgbe_phy_status(struct axgbe_port *pdata)
                                return;
                        }
                }
-               axgbe_phy_status_result(pdata);
+
+               if (axgbe_phy_status_result(pdata))
+                       return;
+
                if (rte_bit_relaxed_get32(AXGBE_LINK_INIT, &pdata->dev_state))
                        rte_bit_relaxed_clear32(AXGBE_LINK_INIT,
                                                &pdata->dev_state);
-- 
2.34.1

Reply via email to