flr_timeout was removed from the code a while ago, updating doc.
Fix minor typo in 5GNR example.
Fixes: 2d4306438c92 ("baseband/fpga_5gnr_fec: add configure function")
Cc: sta...@dpdk.org
Signed-off-by: Hernan Vargas <hernan.var...@intel.com>
---
doc/guides/bbdevs/fpga_5gnr_fec.rst | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst
b/doc/guides/bbdevs/fpga_5gnr_fec.rst
index 956dd6bed560..99fc936829a8 100644
--- a/doc/guides/bbdevs/fpga_5gnr_fec.rst
+++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
@@ -100,7 +100,6 @@ parameters defined in ``rte_fpga_5gnr_fec_conf`` structure:
uint8_t dl_bandwidth;
uint8_t ul_load_balance;
uint8_t dl_load_balance;
- uint16_t flr_time_out;
};
- ``pf_mode_en``: identifies whether only PF is to be used, or the VFs. PF and
@@ -126,10 +125,6 @@ parameters defined in ``rte_fpga_5gnr_fec_conf`` structure:
If all hardware queues exceeds the watermark, no code blocks will be
streamed in from UL/DL code block FIFO.
-- ``flr_time_out``: specifies how many 16.384us to be FLR time out. The
- time_out = flr_time_out x 16.384us. For instance, if you want to set 10ms for
- the FLR time out then set this setting to 0x262=610.
-
An example configuration code calling the function
``rte_fpga_5gnr_fec_configure()`` is shown
below:
@@ -154,7 +149,7 @@ below:
/* setup FPGA PF */
ret = rte_fpga_5gnr_fec_configure(info->dev_name, &conf);
TEST_ASSERT_SUCCESS(ret,
- "Failed to configure 4G FPGA PF for bbdev %s",
+ "Failed to configure 5GNR FPGA PF for bbdev %s",
info->dev_name);
--
2.37.1
