On 2015/10/13 0:26, Bernard Iremonger wrote:
> add dev_flags to rte_eth_dev_data, add macros for dev_flags.
> add kdrv to rte_eth_dev_data.
> add numa_node to rte_eth_dev_data.
> add drv_name to rte_eth_dev_data.
> use dev_type to distinguish between vdev's and pdev's.
> remove pci_dev branches.
>
> Signed-off-by: Bernard Iremonger <bernard.iremonger at intel.com>
I have a question, if we only apply the patch set till here, does DPDK
work fine?
Thanks,
Michael
> ---
> lib/librte_ether/rte_ethdev.c | 40 +++++++++++++++++-----------------------
> lib/librte_ether/rte_ethdev.h | 15 +++++++++++++++
> 2 files changed, 32 insertions(+), 23 deletions(-)
>
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index f593f6e..4187595 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -424,7 +424,7 @@ rte_eth_dev_socket_id(uint8_t port_id)
> {
> if (!rte_eth_dev_is_valid_port(port_id))
> return -1;
> - return rte_eth_devices[port_id].pci_dev->numa_node;
> + return rte_eth_devices[port_id].data->numa_node;
> }
>
> uint8_t
> @@ -503,27 +503,25 @@ rte_eth_dev_get_name_by_port(uint8_t port_id, char
> *name)
> static int
> rte_eth_dev_is_detachable(uint8_t port_id)
> {
> - uint32_t drv_flags;
> + uint32_t dev_flags;
>
> if (!rte_eth_dev_is_valid_port(port_id)) {
> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> return -EINVAL;
> }
>
> - if (rte_eth_devices[port_id].dev_type == RTE_ETH_DEV_PCI) {
> - switch (rte_eth_devices[port_id].pci_dev->kdrv) {
> - case RTE_KDRV_IGB_UIO:
> - case RTE_KDRV_UIO_GENERIC:
> - case RTE_KDRV_NIC_UIO:
> - break;
> - case RTE_KDRV_VFIO:
> - default:
> - return -ENOTSUP;
> - }
> + switch (rte_eth_devices[port_id].data->kdrv) {
> + case RTE_KDRV_IGB_UIO:
> + case RTE_KDRV_UIO_GENERIC:
> + case RTE_KDRV_NIC_UIO:
> + case RTE_KDRV_NONE:
> + break;
> + case RTE_KDRV_VFIO:
> + default:
> + return -ENOTSUP;
> }
> -
> - drv_flags = rte_eth_devices[port_id].driver->pci_drv.drv_flags;
> - return !(drv_flags & RTE_PCI_DRV_DETACHABLE);
> + dev_flags = rte_eth_devices[port_id].data->dev_flags;
> + return !(dev_flags & RTE_ETH_DEV_DETACHABLE);
> }
>
> /* attach the new physical device, then store port_id of the device */
> @@ -1143,14 +1141,11 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t
> nb_rx_q, uint16_t nb_tx_q,
> * If link state interrupt is enabled, check that the
> * device supports it.
> */
> - if (dev_conf->intr_conf.lsc == 1) {
> - const struct rte_pci_driver *pci_drv = &dev->driver->pci_drv;
> -
> - if (!(pci_drv->drv_flags & RTE_PCI_DRV_INTR_LSC)) {
> + if ((dev_conf->intr_conf.lsc == 1) &&
> + (!(dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC))) {
> PMD_DEBUG_TRACE("driver %s does not support lsc\n",
> - pci_drv->name);
> + dev->data->drv_name);
> return -EINVAL;
> - }
> }
>
> /*
> @@ -1795,8 +1790,7 @@ rte_eth_dev_info_get(uint8_t port_id, struct
> rte_eth_dev_info *dev_info)
> FUNC_PTR_OR_RET(*dev->dev_ops->dev_infos_get);
> (*dev->dev_ops->dev_infos_get)(dev, dev_info);
> dev_info->pci_dev = dev->pci_dev;
> - if (dev->driver)
> - dev_info->driver_name = dev->driver->pci_drv.name;
> + dev_info->driver_name = dev->data->drv_name;
> }
>
> void
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> index 8a8c82b..d440bd6 100644
> --- a/lib/librte_ether/rte_ethdev.h
> +++ b/lib/librte_ether/rte_ethdev.h
> @@ -1471,8 +1471,23 @@ struct rte_eth_dev_data {
> all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
> dev_started : 1, /**< Device state: STARTED(1) / STOPPED(0).
> */
> lro : 1; /**< RX LRO is ON(1) / OFF(0) */
> + uint32_t dev_flags; /**< Flags controlling handling of device. */
> + enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
> + int numa_node;
> + const char *drv_name;
> };
>
> +/** Device needs PCI BAR mapping (done with either IGB_UIO or VFIO) */
> +#define RTE_ETH_DEV_DRV_NEED_MAPPING RTE_PCI_DRV_NEED_MAPPING
> +/** Device needs to be unbound even if no module is provided */
> +#define RTE_ETH_DEV_DRV_FORCE_UNBIND RTE_PCI_DRV_FORCE_UNBIND
> +/** Device supports link state interrupt */
> +#define RTE_ETH_DEV_INTR_LSC RTE_PCI_DRV_INTR_LSC
> +/** Device supports detaching capability */
> +#define RTE_ETH_DEV_DETACHABLE RTE_PCI_DRV_DETACHABLE
> +/** Device is a bonded device */
> +#define RTE_ETH_DEV_BONDED 0x0020
> +
> /**
> * @internal
> * The pool of *rte_eth_dev* structures. The size of the pool
