From: Jeremy Spewock <jspew...@iol.unh.edu>
Added the options to filter out LLDP and ARP packets when
sniffing for packets with scapy. This was done using BPF filters to
ensure that the noise these packets provide does not interfere with test
cases.
Signed-off-by: Jeremy Spewock <jspew...@iol.unh.edu>
---
dts/framework/test_suite.py | 15 +++++++++--
dts/framework/testbed_model/tg_node.py | 14 ++++++++--
.../traffic_generator/__init__.py | 7 ++++-
.../capturing_traffic_generator.py | 22 ++++++++++++++-
.../testbed_model/traffic_generator/scapy.py | 27 +++++++++++++++++++
5 files changed, 79 insertions(+), 6 deletions(-)
diff --git a/dts/framework/test_suite.py b/dts/framework/test_suite.py
index dfb391ffbd..ffea917690 100644
--- a/dts/framework/test_suite.py
+++ b/dts/framework/test_suite.py
@@ -38,6 +38,7 @@
from .settings import SETTINGS
from .test_result import BuildTargetResult, Result, TestCaseResult,
TestSuiteResult
from .testbed_model import Port, PortLink, SutNode, TGNode
+from .testbed_model.traffic_generator import PacketFilteringConfig
from .utils import get_packet_summaries
@@ -208,7 +209,12 @@ def configure_testbed_ipv4(self, restore: bool = False) ->
None:
def _configure_ipv4_forwarding(self, enable: bool) -> None:
self.sut_node.configure_ipv4_forwarding(enable)
- def send_packet_and_capture(self, packet: Packet, duration: float = 1) ->
list[Packet]:
+ def send_packet_and_capture(
+ self,
+ packet: Packet,
+ filter_config: PacketFilteringConfig = PacketFilteringConfig(),
+ duration: float = 1,
+ ) -> list[Packet]:
"""Send and receive `packet` using the associated TG.
Send `packet` through the appropriate interface and receive on the
appropriate interface.
@@ -216,6 +222,7 @@ def send_packet_and_capture(self, packet: Packet, duration:
float = 1) -> list[P
Args:
packet: The packet to send.
+ filter_config: The filter to use when capturing packets.
duration: Capture traffic for this amount of time after sending
`packet`.
Returns:
@@ -223,7 +230,11 @@ def send_packet_and_capture(self, packet: Packet,
duration: float = 1) -> list[P
"""
packet = self._adjust_addresses(packet)
return self.tg_node.send_packet_and_capture(
- packet, self._tg_port_egress, self._tg_port_ingress, duration
+ packet,
+ self._tg_port_egress,
+ self._tg_port_ingress,
+ filter_config,
+ duration,
)
def get_expected_packet(self, packet: Packet) -> Packet:
diff --git a/dts/framework/testbed_model/tg_node.py
b/dts/framework/testbed_model/tg_node.py
index f269d4c585..d3206e87e0 100644
--- a/dts/framework/testbed_model/tg_node.py
+++ b/dts/framework/testbed_model/tg_node.py
@@ -15,7 +15,11 @@
from .node import Node
from .port import Port
-from .traffic_generator import CapturingTrafficGenerator,
create_traffic_generator
+from .traffic_generator import (
+ CapturingTrafficGenerator,
+ PacketFilteringConfig,
+ create_traffic_generator,
+)
class TGNode(Node):
@@ -53,6 +57,7 @@ def send_packet_and_capture(
packet: Packet,
send_port: Port,
receive_port: Port,
+ filter_config: PacketFilteringConfig = PacketFilteringConfig(),
duration: float = 1,
) -> list[Packet]:
"""Send `packet`, return received traffic.
@@ -65,13 +70,18 @@ def send_packet_and_capture(
packet: The packet to send.
send_port: The egress port on the TG node.
receive_port: The ingress port in the TG node.
+ filter_config: The filter to use when capturing packets.
duration: Capture traffic for this amount of time after sending
`packet`.
Returns:
A list of received packets. May be empty if no packets are
captured.
"""
return self.traffic_generator.send_packet_and_capture(
- packet, send_port, receive_port, duration
+ packet,
+ send_port,
+ receive_port,
+ filter_config,
+ duration,
)
def close(self) -> None:
diff --git a/dts/framework/testbed_model/traffic_generator/__init__.py
b/dts/framework/testbed_model/traffic_generator/__init__.py
index 11e2bd7d97..0eaf0355cd 100644
--- a/dts/framework/testbed_model/traffic_generator/__init__.py
+++ b/dts/framework/testbed_model/traffic_generator/__init__.py
@@ -14,11 +14,16 @@
and a capturing traffic generator is required.
"""
+# pylama:ignore=W0611
+
from framework.config import ScapyTrafficGeneratorConfig, TrafficGeneratorType
from framework.exception import ConfigurationError
from framework.testbed_model.node import Node
-from .capturing_traffic_generator import CapturingTrafficGenerator
+from .capturing_traffic_generator import (
+ CapturingTrafficGenerator,
+ PacketFilteringConfig,
+)
from .scapy import ScapyTrafficGenerator
diff --git
a/dts/framework/testbed_model/traffic_generator/capturing_traffic_generator.py
b/dts/framework/testbed_model/traffic_generator/capturing_traffic_generator.py
index 0246590333..e5a1560e90 100644
---
a/dts/framework/testbed_model/traffic_generator/capturing_traffic_generator.py
+++
b/dts/framework/testbed_model/traffic_generator/capturing_traffic_generator.py
@@ -11,6 +11,7 @@
import uuid
from abc import abstractmethod
+from dataclasses import dataclass
import scapy.utils # type: ignore[import]
from scapy.packet import Packet # type: ignore[import]
@@ -26,6 +27,19 @@ def _get_default_capture_name() -> str:
return str(uuid.uuid4())
+@dataclass(slots=True, frozen=True)
+class PacketFilteringConfig:
+ """The supported filtering options for :class:`CapturingTrafficGenerator`.
+
+ Attributes:
+ no_lldp: If :data:`True`, LLDP packets will be filtered out when
capturing.
+ no_arp: If :data:`True`, ARP packets will be filtered out when
capturing.
+ """
+
+ no_lldp: bool = True
+ no_arp: bool = True
+
+
class CapturingTrafficGenerator(TrafficGenerator):
"""Capture packets after sending traffic.
@@ -54,6 +68,7 @@ def send_packet_and_capture(
packet: Packet,
send_port: Port,
receive_port: Port,
+ filter_config: PacketFilteringConfig,
duration: float,
capture_name: str = _get_default_capture_name(),
) -> list[Packet]:
@@ -68,6 +83,7 @@ def send_packet_and_capture(
packet: The packet to send.
send_port: The egress port on the TG node.
receive_port: The ingress port in the TG node.
+ filter_config: Filters to apply when capturing packets.
duration: Capture traffic for this amount of time after sending
the packet.
capture_name: The name of the .pcap file where to store the
capture.
@@ -75,7 +91,7 @@ def send_packet_and_capture(
The received packets. May be empty if no packets are captured.
"""
return self.send_packets_and_capture(
- [packet], send_port, receive_port, duration, capture_name
+ [packet], send_port, receive_port, filter_config, duration,
capture_name
)
def send_packets_and_capture(
@@ -83,6 +99,7 @@ def send_packets_and_capture(
packets: list[Packet],
send_port: Port,
receive_port: Port,
+ filter_config: PacketFilteringConfig,
duration: float,
capture_name: str = _get_default_capture_name(),
) -> list[Packet]:
@@ -99,6 +116,7 @@ def send_packets_and_capture(
packets: The packets to send.
send_port: The egress port on the TG node.
receive_port: The ingress port in the TG node.
+ filter_config: Filters to apply when capturing packets.
duration: Capture traffic for this amount of time after sending
the packets.
capture_name: The name of the .pcap file where to store the
capture.
@@ -113,6 +131,7 @@ def send_packets_and_capture(
packets,
send_port,
receive_port,
+ filter_config,
duration,
)
@@ -126,6 +145,7 @@ def _send_packets_and_capture(
packets: list[Packet],
send_port: Port,
receive_port: Port,
+ filter_config: PacketFilteringConfig,
duration: float,
) -> list[Packet]:
"""The implementation of :method:`send_packets_and_capture`.
diff --git a/dts/framework/testbed_model/traffic_generator/scapy.py
b/dts/framework/testbed_model/traffic_generator/scapy.py
index 5b60f66237..df3069d516 100644
--- a/dts/framework/testbed_model/traffic_generator/scapy.py
+++ b/dts/framework/testbed_model/traffic_generator/scapy.py
@@ -32,6 +32,7 @@
from .capturing_traffic_generator import (
CapturingTrafficGenerator,
+ PacketFilteringConfig,
_get_default_capture_name,
)
@@ -69,6 +70,7 @@ def scapy_send_packets_and_capture(
send_iface: str,
recv_iface: str,
duration: float,
+ sniff_filter: str,
) -> list[bytes]:
"""The RPC function to send and capture packets.
@@ -90,6 +92,7 @@ def scapy_send_packets_and_capture(
iface=recv_iface,
store=True,
started_callback=lambda *args: scapy.all.sendp(scapy_packets,
iface=send_iface),
+ filter=sniff_filter,
)
sniffer.start()
time.sleep(duration)
@@ -260,11 +263,34 @@ def _send_packets(self, packets: list[Packet], port:
Port) -> None:
packets = [packet.build() for packet in packets]
self.rpc_server_proxy.scapy_send_packets(packets, port.logical_name)
+ def _create_packet_filter(self, filter_config: PacketFilteringConfig) ->
str:
+ """Combines filter settings from `filter_config` into a BPF that scapy
can use.
+
+ Scapy allows for the use of Berkeley Packet Filters (BPFs) to filter
what packets are
+ collected based on various attributes of the packet.
+
+ Args:
+ filter_config: Config class that specifies which filters should be
applied.
+
+ Returns:
+ A string representing the combination of BPF filters to be passed
to scapy. For
+ example:
+
+ "ether[12:2] != 0x88cc && ether[12:2] != 0x0806"
+ """
+ bpf_filter = []
+ if filter_config.no_arp:
+ bpf_filter.append("ether[12:2] != 0x0806")
+ if filter_config.no_lldp:
+ bpf_filter.append("ether[12:2] != 0x88cc")
+ return " && ".join(bpf_filter)
+
def _send_packets_and_capture(
self,
packets: list[Packet],
send_port: Port,
receive_port: Port,
+ filter_config: PacketFilteringConfig,
duration: float,
capture_name: str = _get_default_capture_name(),
) -> list[Packet]:
@@ -277,6 +303,7 @@ def _send_packets_and_capture(
send_port.logical_name,
receive_port.logical_name,
duration,
+ self._create_packet_filter(filter_config),
) # type: ignore[assignment]
scapy_packets = [Ether(packet.data) for packet in xmlrpc_packets]
--
2.43.0
