mwaitx allows EPYC processors to enter a implementation dependent
power/performance optimized state (C1 state) for a specific period
or until a store to the monitored address range.
Signed-off-by: Sivaprasad Tummala <sivaprasad.tumm...@amd.com>
Acked-by: Anatoly Burakov <anatoly.bura...@intel.com>
---
lib/eal/x86/rte_power_intrinsics.c | 108 ++++++++++++++++++++++-------
1 file changed, 84 insertions(+), 24 deletions(-)
diff --git a/lib/eal/x86/rte_power_intrinsics.c
b/lib/eal/x86/rte_power_intrinsics.c
index 664cde01e9..0d2953f570 100644
--- a/lib/eal/x86/rte_power_intrinsics.c
+++ b/lib/eal/x86/rte_power_intrinsics.c
@@ -17,6 +17,78 @@ static struct power_wait_status {
volatile void *monitor_addr; /**< NULL if not currently sleeping */
} __rte_cache_aligned wait_status[RTE_MAX_LCORE];
+/**
+ * This functions uses UMONITOR/UMWAIT instructions and will enter C0.2 state.
+ * For more information about usage of these instructions, please refer to
+ * Intel(R) 64 and IA-32 Architectures Software Developer's Manual.
+ */
+static void intel_umonitor(volatile void *addr)
+{
+#if defined(RTE_TOOLCHAIN_MSVC) || defined(__WAITPKG__)
+ /* cast away "volatile" when using the intrinsic */
+ _umonitor((void *)(uintptr_t)addr);
+#else
+ /*
+ * we're using raw byte codes for compiler versions which
+ * don't support this instruction natively.
+ */
+ asm volatile(".byte 0xf3, 0x0f, 0xae, 0xf7;"
+ :
+ : "D"(addr));
+#endif
+}
+
+static void intel_umwait(const uint64_t timeout)
+{
+ const uint32_t tsc_l = (uint32_t)timeout;
+ const uint32_t tsc_h = (uint32_t)(timeout >> 32);
+#if defined(RTE_TOOLCHAIN_MSVC) || defined(__WAITPKG__)
+ _umwait(tsc_l, tsc_h);
+#else
+ asm volatile(".byte 0xf2, 0x0f, 0xae, 0xf7;"
+ : /* ignore rflags */
+ : "D"(0), /* enter C0.2 */
+ "a"(tsc_l), "d"(tsc_h));
+#endif
+}
+
+/**
+ * This functions uses MONITORX/MWAITX instructions and will enter C1 state.
+ * For more information about usage of these instructions, please refer to
+ * AMD64 Architecture Programmer’s Manual.
+ */
+static void amd_monitorx(volatile void *addr)
+{
+#if defined(__MWAITX__)
+ /* cast away "volatile" when using the intrinsic */
+ _mm_monitorx((void *)(uintptr_t)addr, 0, 0);
+#else
+ asm volatile(".byte 0x0f, 0x01, 0xfa;"
+ :
+ : "a"(addr),
+ "c"(0), /* no extensions */
+ "d"(0)); /* no hints */
+#endif
+}
+
+static void amd_mwaitx(const uint64_t timeout)
+{
+ RTE_SET_USED(timeout);
+#if defined(__MWAITX__)
+ _mm_mwaitx(0, 0, 0);
+#else
+ asm volatile(".byte 0x0f, 0x01, 0xfb;"
+ : /* ignore rflags */
+ : "a"(0), /* enter C1 */
+ "c"(0)); /* no time-out */
+#endif
+}
+
+static struct {
+ void (*mmonitor)(volatile void *addr);
+ void (*mwait)(const uint64_t timeout);
+} __rte_cache_aligned power_monitor_ops;
+
static inline void
__umwait_wakeup(volatile void *addr)
{
@@ -76,8 +148,6 @@ int
rte_power_monitor(const struct rte_power_monitor_cond *pmc,
const uint64_t tsc_timestamp)
{
- const uint32_t tsc_l = (uint32_t)tsc_timestamp;
- const uint32_t tsc_h = (uint32_t)(tsc_timestamp >> 32);
const unsigned int lcore_id = rte_lcore_id();
struct power_wait_status *s;
uint64_t cur_value;
@@ -105,19 +175,8 @@ rte_power_monitor(const struct rte_power_monitor_cond *pmc,
rte_spinlock_lock(&s->lock);
s->monitor_addr = pmc->addr;
- /* set address for UMONITOR */
-#if defined(RTE_TOOLCHAIN_MSVC) || defined(__WAITPKG__)
- /* cast away "volatile" when using the intrinsic */
- _umonitor((void *)(uintptr_t)pmc->addr);
-#else
- /*
- * we're using raw byte codes for compiler versions which
- * don't support this instruction natively.
- */
- asm volatile(".byte 0xf3, 0x0f, 0xae, 0xf7;"
- :
- : "D"(pmc->addr));
-#endif
+ /* set address for memory monitor */
+ power_monitor_ops.mmonitor(pmc->addr);
/* now that we've put this address into monitor, we can unlock */
rte_spinlock_unlock(&s->lock);
@@ -128,15 +187,8 @@ rte_power_monitor(const struct rte_power_monitor_cond *pmc,
if (pmc->fn(cur_value, pmc->opaque) != 0)
goto end;
- /* execute UMWAIT */
-#if defined(RTE_TOOLCHAIN_MSVC) || defined(__WAITPKG__)
- _umwait(tsc_l, tsc_h);
-#else
- asm volatile(".byte 0xf2, 0x0f, 0xae, 0xf7;"
- : /* ignore rflags */
- : "D"(0), /* enter C0.2 */
- "a"(tsc_l), "d"(tsc_h));
-#endif
+ /* execute mwait */
+ power_monitor_ops.mwait(tsc_timestamp);
end:
/* erase sleep address */
@@ -186,6 +238,14 @@ RTE_INIT(rte_power_intrinsics_init) {
wait_multi_supported = 1;
if (i.power_monitor)
monitor_supported = 1;
+
+ if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_MONITORX)) { /* AMD */
+ power_monitor_ops.mmonitor = &amd_monitorx;
+ power_monitor_ops.mwait = &amd_mwaitx;
+ } else { /* Intel */
+ power_monitor_ops.mmonitor = &intel_umonitor;
+ power_monitor_ops.mwait = &intel_umwait;
+ }
}
int
--
2.34.1
