Hi Maxime,
> -----Original Message-----
> From: Maxime Coquelin <maxime.coque...@redhat.com>
> Sent: Tuesday, October 3, 2023 7:37 AM
> To: Chautru, Nicolas <nicolas.chau...@intel.com>; dev@dpdk.org
> Cc: hemant.agra...@nxp.com; david.march...@redhat.com; Vargas, Hernan
> <hernan.var...@intel.com>
> Subject: Re: [PATCH v3 09/12] baseband/acc: add FFT support to VRB2 variant
>
>
>
> On 9/29/23 18:35, Nicolas Chautru wrote:
> > Support for the FFT the processing specific to the
> > VRB2 variant.
> >
> > Signed-off-by: Nicolas Chautru <nicolas.chau...@intel.com>
> > ---
> > drivers/baseband/acc/rte_vrb_pmd.c | 132
> ++++++++++++++++++++++++++++-
> > 1 file changed, 128 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/baseband/acc/rte_vrb_pmd.c
> > b/drivers/baseband/acc/rte_vrb_pmd.c
> > index 93add82947..ce4b90d8e7 100644
> > --- a/drivers/baseband/acc/rte_vrb_pmd.c
> > +++ b/drivers/baseband/acc/rte_vrb_pmd.c
> > @@ -903,6 +903,9 @@ vrb_queue_setup(struct rte_bbdev *dev, uint16_t
> queue_id,
> > ACC_FCW_LD_BLEN : (conf->op_type ==
> RTE_BBDEV_OP_FFT ?
> > ACC_FCW_FFT_BLEN : ACC_FCW_MLDTS_BLEN))));
> >
> > + if ((q->d->device_variant == VRB2_VARIANT) && (conf->op_type ==
> RTE_BBDEV_OP_FFT))
> > + fcw_len = ACC_FCW_FFT_BLEN_3;
> > +
> > for (desc_idx = 0; desc_idx < d->sw_ring_max_depth; desc_idx++) {
> > desc = q->ring_addr + desc_idx;
> > desc->req.word0 = ACC_DMA_DESC_TYPE; @@ -1323,6
> +1326,24 @@
> > vrb_dev_info_get(struct rte_bbdev *dev, struct rte_bbdev_driver_info
> *dev_info)
> > .num_buffers_soft_out = 0,
> > }
> > },
> > + {
> > + .type = RTE_BBDEV_OP_FFT,
> > + .cap.fft = {
> > + .capability_flags =
> > +
> RTE_BBDEV_FFT_WINDOWING |
> > +
> RTE_BBDEV_FFT_CS_ADJUSTMENT |
> > +
> RTE_BBDEV_FFT_DFT_BYPASS |
> > +
> RTE_BBDEV_FFT_IDFT_BYPASS |
> > + RTE_BBDEV_FFT_FP16_INPUT
> |
> > +
> RTE_BBDEV_FFT_FP16_OUTPUT |
> > +
> RTE_BBDEV_FFT_POWER_MEAS |
> > +
> RTE_BBDEV_FFT_WINDOWING_BYPASS,
> > + .num_buffers_src =
> > + 1,
> > + .num_buffers_dst =
> > + 1,
> > + }
> > + },
> > RTE_BBDEV_END_OF_CAPABILITIES_LIST()
> > };
> >
> > @@ -3849,6 +3870,47 @@ vrb1_fcw_fft_fill(struct rte_bbdev_fft_op *op,
> struct acc_fcw_fft *fcw)
> > fcw->bypass = 0;
> > }
> >
> > +/* Fill in a frame control word for FFT processing. */ static inline
> > +void vrb2_fcw_fft_fill(struct rte_bbdev_fft_op *op, struct
> > +acc_fcw_fft_3 *fcw) {
> > + fcw->in_frame_size = op->fft.input_sequence_size;
> > + fcw->leading_pad_size = op->fft.input_leading_padding;
> > + fcw->out_frame_size = op->fft.output_sequence_size;
> > + fcw->leading_depad_size = op->fft.output_leading_depadding;
> > + fcw->cs_window_sel = op->fft.window_index[0] +
> > + (op->fft.window_index[1] << 8) +
> > + (op->fft.window_index[2] << 16) +
> > + (op->fft.window_index[3] << 24);
> > + fcw->cs_window_sel2 = op->fft.window_index[4] +
> > + (op->fft.window_index[5] << 8);
> > + fcw->cs_enable_bmap = op->fft.cs_bitmap;
> > + fcw->num_antennas = op->fft.num_antennas_log2;
> > + fcw->idft_size = op->fft.idft_log2;
> > + fcw->dft_size = op->fft.dft_log2;
> > + fcw->cs_offset = op->fft.cs_time_adjustment;
> > + fcw->idft_shift = op->fft.idft_shift;
> > + fcw->dft_shift = op->fft.dft_shift;
> > + fcw->cs_multiplier = op->fft.ncs_reciprocal;
> > + fcw->power_shift = op->fft.power_shift; > + fcw->exp_adj = op-
> >fft.fp16_exp_adjust;
> > + fcw->fp16_in = check_bit(op->fft.op_flags,
> RTE_BBDEV_FFT_FP16_INPUT);
> > + fcw->fp16_out = check_bit(op->fft.op_flags,
> RTE_BBDEV_FFT_FP16_OUTPUT);
> > + fcw->power_en = check_bit(op->fft.op_flags,
> RTE_BBDEV_FFT_POWER_MEAS);
> > + if (check_bit(op->fft.op_flags,
> > + RTE_BBDEV_FFT_IDFT_BYPASS)) {
> > + if (check_bit(op->fft.op_flags,
> > + RTE_BBDEV_FFT_WINDOWING_BYPASS))
> > + fcw->bypass = 2;
> > + else
> > + fcw->bypass = 1;
> > + } else if (check_bit(op->fft.op_flags,
> > + RTE_BBDEV_FFT_DFT_BYPASS))
> > + fcw->bypass = 3;
> > + else
> > + fcw->bypass = 0;
>
> The only difference I see with VRB1 are backed by corresponding op_flags
> (POWER & FP16), is that correct? If so, it does not make sense to me to have a
> specific function for VRB2.
There are more changes but these are only formally enabled in the next stepping
hence some of the
related code is not included yet. More generally the FCW and IP is different
from VRB1 implementation.
>
> > +}
> > +
> > static inline int
> > vrb1_dma_desc_fft_fill(struct rte_bbdev_fft_op *op,
> > struct acc_dma_req_desc *desc,
> > @@ -3882,6 +3944,58 @@ vrb1_dma_desc_fft_fill(struct rte_bbdev_fft_op
> *op,
> > return 0;
> > }
> >
> > +static inline int
> > +vrb2_dma_desc_fft_fill(struct rte_bbdev_fft_op *op,
> > + struct acc_dma_req_desc *desc,
> > + struct rte_mbuf *input, struct rte_mbuf *output, struct
> rte_mbuf *win_input,
> > + struct rte_mbuf *pwr, uint32_t *in_offset, uint32_t
> *out_offset,
> > + uint32_t *win_offset, uint32_t *pwr_offset) {
> > + bool pwr_en = check_bit(op->fft.op_flags,
> RTE_BBDEV_FFT_POWER_MEAS);
> > + bool win_en = check_bit(op->fft.op_flags,
> RTE_BBDEV_FFT_DEWINDOWING);
> > + int num_cs = 0, i, bd_idx = 1;
> > +
> > + /* FCW already done */
> > + acc_header_init(desc);
> > +
> > + RTE_SET_USED(win_input);
> > + RTE_SET_USED(win_offset);
> > +
> > + desc->data_ptrs[bd_idx].address = rte_pktmbuf_iova_offset(input,
> *in_offset);
> > + desc->data_ptrs[bd_idx].blen = op->fft.input_sequence_size *
> ACC_IQ_SIZE;
> > + desc->data_ptrs[bd_idx].blkid = ACC_DMA_BLKID_IN;
> > + desc->data_ptrs[bd_idx].last = 1;
> > + desc->data_ptrs[bd_idx].dma_ext = 0;
> > + bd_idx++;
> > +
> > + desc->data_ptrs[bd_idx].address = rte_pktmbuf_iova_offset(output,
> *out_offset);
> > + desc->data_ptrs[bd_idx].blen = op->fft.output_sequence_size *
> ACC_IQ_SIZE;
> > + desc->data_ptrs[bd_idx].blkid = ACC_DMA_BLKID_OUT_HARD;
> > + desc->data_ptrs[bd_idx].last = pwr_en ? 0 : 1;
> > + desc->data_ptrs[bd_idx].dma_ext = 0;
> > + desc->m2dlen = win_en ? 3 : 2;
> > + desc->d2mlen = pwr_en ? 2 : 1;
> > + desc->ib_ant_offset = op->fft.input_sequence_size;
> > + desc->num_ant = op->fft.num_antennas_log2 - 3;
> > +
> > + for (i = 0; i < RTE_BBDEV_MAX_CS; i++)
> > + if (check_bit(op->fft.cs_bitmap, 1 << i))
> > + num_cs++;
> > + desc->num_cs = num_cs;
> > +
> > + if (pwr_en && pwr) {
> > + bd_idx++;
> > + desc->data_ptrs[bd_idx].address =
> rte_pktmbuf_iova_offset(pwr, *pwr_offset);
> > + desc->data_ptrs[bd_idx].blen = num_cs * (1 << op-
> >fft.num_antennas_log2) * 4;
> > + desc->data_ptrs[bd_idx].blkid = ACC_DMA_BLKID_OUT_SOFT;
> > + desc->data_ptrs[bd_idx].last = 1;
> > + desc->data_ptrs[bd_idx].dma_ext = 0;
> > + }
> > + desc->ob_cyc_offset = op->fft.output_sequence_size;
> > + desc->ob_ant_offset = op->fft.output_sequence_size * num_cs;
> > + desc->op_addr = op;
> > + return 0;
> > +}
> >
> > /** Enqueue one FFT operation for device. */
> > static inline int
> > @@ -3889,22 +4003,32 @@ vrb_enqueue_fft_one_op(struct acc_queue *q,
> struct rte_bbdev_fft_op *op,
> > uint16_t total_enqueued_cbs)
> > {
> > union acc_dma_desc *desc;
> > - struct rte_mbuf *input, *output;
> > - uint32_t in_offset, out_offset;
> > + struct rte_mbuf *input, *output, *pwr, *win;
> > + uint32_t in_offset, out_offset, pwr_offset, win_offset;
> > struct acc_fcw_fft *fcw;
> >
> > desc = acc_desc(q, total_enqueued_cbs);
> > input = op->fft.base_input.data;
> > output = op->fft.base_output.data;
> > + pwr = op->fft.power_meas_output.data;
> > + win = op->fft.dewindowing_input.data;
> > in_offset = op->fft.base_input.offset;
> > out_offset = op->fft.base_output.offset;
> > + pwr_offset = op->fft.power_meas_output.offset;
> > + win_offset = op->fft.dewindowing_input.offset;
> >
> > fcw = (struct acc_fcw_fft *) (q->fcw_ring +
> > ((q->sw_ring_head + total_enqueued_cbs) & q-
> >sw_ring_wrap_mask)
> > * ACC_MAX_FCW_SIZE);
> >
> > - vrb1_fcw_fft_fill(op, fcw);
> > - vrb1_dma_desc_fft_fill(op, &desc->req, input, output, &in_offset,
> &out_offset);
> > + if (q->d->device_variant == VRB1_VARIANT) {
> > + vrb1_fcw_fft_fill(op, fcw);
> > + vrb1_dma_desc_fft_fill(op, &desc->req, input, output,
> &in_offset, &out_offset);
> > + } else {
> > + vrb2_fcw_fft_fill(op, (struct acc_fcw_fft_3 *) fcw);
> > + vrb2_dma_desc_fft_fill(op, &desc->req, input, output, win,
> pwr,
> > + &in_offset, &out_offset, &win_offset,
> &pwr_offset);
> > + }
> > #ifdef RTE_LIBRTE_BBDEV_DEBUG
> > rte_memdump(stderr, "FCW", &desc->req.fcw_fft,
> > sizeof(desc->req.fcw_fft));
