> -----Original Message-----
> From: David Marchand <david.march...@redhat.com>
> Sent: Monday, August 21, 2023 7:36 PM
> To: dev@dpdk.org
> Cc: tho...@monjalon.net; ferruh.yi...@amd.com; Xia, Chenbo
> <chenbo....@intel.com>; nipun.gu...@amd.com; Richardson, Bruce
> <bruce.richard...@intel.com>; Julien Aube <julien_d...@jaube.fr>; Gaetan
> Rivet <gr...@u256.net>
> Subject: [PATCH v2 09/15] pci: define some PM constants
>
> Define some PCI Power Management constants and use them in existing
> drivers.
>
> Signed-off-by: David Marchand <david.march...@redhat.com>
> Acked-by: Bruce Richardson <bruce.richard...@intel.com>
> ---
> drivers/net/bnx2x/bnx2x.c | 17 +++++++++--------
> drivers/net/bnx2x/bnx2x.h | 5 -----
> lib/pci/rte_pci.h | 6 ++++++
> 3 files changed, 15 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/bnx2x/bnx2x.c b/drivers/net/bnx2x/bnx2x.c
> index e3f14400cc..faf061beba 100644
> --- a/drivers/net/bnx2x/bnx2x.c
> +++ b/drivers/net/bnx2x/bnx2x.c
> @@ -5843,17 +5843,17 @@ static int bnx2x_set_power_state(struct
> bnx2x_softc *sc, uint8_t state)
> return 0;
> }
>
> - pci_read(sc, (sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS),
> &pmcsr,
> + pci_read(sc, (sc->devinfo.pcie_pm_cap_reg + RTE_PCI_PM_CTRL), &pmcsr,
> 2);
>
> switch (state) {
> case PCI_PM_D0:
> pci_write_word(sc,
> (sc->devinfo.pcie_pm_cap_reg +
> - PCIR_POWER_STATUS),
> - ((pmcsr & ~PCIM_PSTAT_DMASK) | PCIM_PSTAT_PME));
> + RTE_PCI_PM_CTRL),
> + ((pmcsr & ~RTE_PCI_PM_CTRL_STATE_MASK) |
> RTE_PCI_PM_CTRL_PME_STATUS));
>
> - if (pmcsr & PCIM_PSTAT_DMASK) {
> + if (pmcsr & RTE_PCI_PM_CTRL_STATE_MASK) {
> /* delay required during transition out of D3hot */
> DELAY(20000);
> }
> @@ -5866,16 +5866,17 @@ static int bnx2x_set_power_state(struct
> bnx2x_softc *sc, uint8_t state)
> return 0;
> }
>
> - pmcsr &= ~PCIM_PSTAT_DMASK;
> - pmcsr |= PCIM_PSTAT_D3;
> + pmcsr &= ~RTE_PCI_PM_CTRL_STATE_MASK;
> + /* D3 power state */
> + pmcsr |= 0x3;
>
> if (sc->wol) {
> - pmcsr |= PCIM_PSTAT_PMEENABLE;
> + pmcsr |= RTE_PCI_PM_CTRL_PME_ENABLE;
> }
>
> pci_write_long(sc,
> (sc->devinfo.pcie_pm_cap_reg +
> - PCIR_POWER_STATUS), pmcsr);
> + RTE_PCI_PM_CTRL), pmcsr);
>
> /*
> * No more memory access after this point until device is
> brought back
> diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
> index 60af75d336..1efa166316 100644
> --- a/drivers/net/bnx2x/bnx2x.h
> +++ b/drivers/net/bnx2x/bnx2x.h
> @@ -41,11 +41,6 @@
> #define PCIR_EXPRESS_DEVICE_CTL PCI_EXP_DEVCTL
> #define PCIM_EXP_CTL_MAX_PAYLOAD PCI_EXP_DEVCTL_PAYLOAD
> #define PCIM_EXP_CTL_MAX_READ_REQUEST PCI_EXP_DEVCTL_READRQ
> -#define PCIR_POWER_STATUS PCI_PM_CTRL
> -#define PCIM_PSTAT_DMASK PCI_PM_CTRL_STATE_MASK
> -#define PCIM_PSTAT_PME PCI_PM_CTRL_PME_STATUS
> -#define PCIM_PSTAT_D3 0x3
> -#define PCIM_PSTAT_PMEENABLE PCI_PM_CTRL_PME_ENABLE
> #else
> #include <dev/pci/pcireg.h>
> #endif
> diff --git a/lib/pci/rte_pci.h b/lib/pci/rte_pci.h
> index 62bf87aa10..542d142dfb 100644
> --- a/lib/pci/rte_pci.h
> +++ b/lib/pci/rte_pci.h
> @@ -57,6 +57,12 @@ extern "C" {
> #define RTE_PCI_CAP_ID_MSIX 0x11 /* MSI-X */
> #define RTE_PCI_CAP_SIZEOF 4
>
> +/* Power Management Registers (RTE_PCI_CAP_ID_PM) */
> +#define RTE_PCI_PM_CTRL 4 /* PM control and status
> register */
> +#define RTE_PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0
> to D3) */
> +#define RTE_PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */
> +#define RTE_PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */
> +
> /* MSI-X registers (RTE_PCI_CAP_ID_MSIX) */
> #define RTE_PCI_MSIX_FLAGS 2 /* Message Control */
> #define RTE_PCI_MSIX_FLAGS_QSIZE 0x07ff /* Table size */
> --
> 2.41.0
Reviewed-by: Chenbo Xia <chenbo....@intel.com>
