This commit adds a unit test for an issue identified
where ordered history-list entries are not correctly
cleared when the returned event is of op RELEASE type.
The result of the history-list bug is that a future event
which re-uses that history-list slot, but has an op type
of FORWARD will incorrectly be reordered.
The existing unit-tests did not cover the RELEASE of an
ORDERED queue, and then stress-test the history-list by
iterating HIST_LIST times afterwards.
Signed-off-by: Harry van Haaren <harry.van.haa...@intel.com>
---
drivers/event/sw/sw_evdev_selftest.c | 132 +++++++++++++++++++++++++++
1 file changed, 132 insertions(+)
diff --git a/drivers/event/sw/sw_evdev_selftest.c
b/drivers/event/sw/sw_evdev_selftest.c
index 3aa8d76ca8..59afa260c6 100644
--- a/drivers/event/sw/sw_evdev_selftest.c
+++ b/drivers/event/sw/sw_evdev_selftest.c
@@ -2959,6 +2959,132 @@ dev_stop_flush(struct test *t) /* test to check we can
properly flush events */
return -1;
}
+static int
+ordered_atomic_hist_completion(struct test *t)
+{
+ const int rx_enq = 0;
+ int err;
+
+ /* Create instance with 1 atomic QID going to 3 ports + 1 prod port */
+ if (init(t, 2, 2) < 0 ||
+ create_ports(t, 2) < 0 ||
+ create_ordered_qids(t, 1) < 0 ||
+ create_atomic_qids(t, 1) < 0)
+ return -1;
+
+ /* Helpers to identify queues */
+ const uint8_t qid_ordered = t->qid[0];
+ const uint8_t qid_atomic = t->qid[1];
+
+ /* CQ mapping to QID */
+ if (rte_event_port_link(evdev, t->port[1], &t->qid[0], NULL, 1) != 1) {
+ printf("%d: error mapping port 1 qid\n", __LINE__);
+ return -1;
+ }
+ if (rte_event_port_link(evdev, t->port[1], &t->qid[1], NULL, 1) != 1) {
+ printf("%d: error mapping port 1 qid\n", __LINE__);
+ return -1;
+ }
+ if (rte_event_dev_start(evdev) < 0) {
+ printf("%d: Error with start call\n", __LINE__);
+ return -1;
+ }
+
+ /* Enqueue 1x ordered event, to be RELEASE-ed by the worker
+ * CPU, which may cause hist-list corruption (by not comleting)
+ */
+ struct rte_event ord_ev = {
+ .op = RTE_EVENT_OP_NEW,
+ .queue_id = qid_ordered,
+ .event_type = RTE_EVENT_TYPE_CPU,
+ .priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+ };
+ err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ord_ev, 1);
+ if (err != 1) {
+ printf("%d: Failed to enqueue\n", __LINE__);
+ return -1;
+ }
+
+ /* call the scheduler. This schedules the above event as a single
+ * event in an ORDERED queue, to the worker.
+ */
+ rte_service_run_iter_on_app_lcore(t->service_id, 1);
+
+ /* Dequeue ORDERED event 0 from port 1, so that we can then drop */
+ struct rte_event ev;
+ if (!rte_event_dequeue_burst(evdev, t->port[1], &ev, 1, 0)) {
+ printf("%d: failed to dequeue\n", __LINE__);
+ return -1;
+ }
+
+ /* drop the ORDERED event. Here the history list should be completed,
+ * but might not be if the hist-list bug exists. Call scheduler to make
+ * it act on the RELEASE that was enqueued.
+ */
+ rte_event_enqueue_burst(evdev, t->port[1], &release_ev, 1);
+ rte_service_run_iter_on_app_lcore(t->service_id, 1);
+
+ /* Enqueue 1x atomic event, to then FORWARD to trigger atomic hist-list
+ * completion. If the bug exists, the ORDERED entry may be completed in
+ * error (aka, using the ORDERED-ROB for the ATOMIC event). This is the
+ * main focus of this unit test.
+ */
+ {
+ struct rte_event ev = {
+ .op = RTE_EVENT_OP_NEW,
+ .queue_id = qid_atomic,
+ .event_type = RTE_EVENT_TYPE_CPU,
+ .priority = RTE_EVENT_DEV_PRIORITY_NORMAL,
+ .flow_id = 123,
+ };
+
+ err = rte_event_enqueue_burst(evdev, t->port[rx_enq], &ev, 1);
+ if (err != 1) {
+ printf("%d: Failed to enqueue\n", __LINE__);
+ return -1;
+ }
+ }
+ rte_service_run_iter_on_app_lcore(t->service_id, 1);
+
+ /* Deq ATM event, then forward it for more than HIST_LIST_SIZE times,
+ * to re-use the history list entry that may be corrupted previously.
+ */
+ for (int i = 0; i < SW_PORT_HIST_LIST + 2; i++) {
+ if (!rte_event_dequeue_burst(evdev, t->port[1], &ev, 1, 0)) {
+ printf("%d: failed to dequeue, did corrupt ORD hist "
+ "list steal this ATM event?\n", __LINE__);
+ return -1;
+ }
+
+ /* Re-enqueue the ATM event as FWD, trigger hist-list. */
+ ev.op = RTE_EVENT_OP_FORWARD;
+ err = rte_event_enqueue_burst(evdev, t->port[1], &ev, 1);
+ if (err != 1) {
+ printf("%d: Failed to enqueue\n", __LINE__);
+ return -1;
+ }
+
+ rte_service_run_iter_on_app_lcore(t->service_id, 1);
+ }
+
+ /* If HIST-LIST + N count of dequeues succeed above, the hist list
+ * has not been corrupted. If it is corrupted, the ATM event is pushed
+ * into the ORDERED-ROB and will not dequeue.
+ */
+
+ /* release the ATM event that's been forwarded HIST_LIST times */
+ err = rte_event_enqueue_burst(evdev, t->port[1], &release_ev, 1);
+ if (err != 1) {
+ printf("%d: Failed to enqueue\n", __LINE__);
+ return -1;
+ }
+
+ rte_service_run_iter_on_app_lcore(t->service_id, 1);
+
+ cleanup(t);
+ return 0;
+}
+
static int
worker_loopback_worker_fn(void *arg)
{
@@ -3388,6 +3514,12 @@ test_sw_eventdev(void)
printf("ERROR - Stop Flush test FAILED.\n");
goto test_fail;
}
+ printf("*** Running Ordered & Atomic hist-list completion test...\n");
+ ret = ordered_atomic_hist_completion(t);
+ if (ret != 0) {
+ printf("ERROR - Ordered & Atomic hist-list test FAILED.\n");
+ goto test_fail;
+ }
if (rte_lcore_count() >= 3) {
printf("*** Running Worker loopback test...\n");
ret = worker_loopback(t, 0);
--
2.34.1
