Define some PCI command constants and use them in existing drivers.
Signed-off-by: David Marchand <david.march...@redhat.com>
---
drivers/bus/pci/linux/pci_vfio.c | 8 ++++----
drivers/event/dlb2/pf/dlb2_main.c | 8 +++-----
lib/pci/rte_pci.h | 4 +++-
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/bus/pci/linux/pci_vfio.c b/drivers/bus/pci/linux/pci_vfio.c
index 6d13cafdcf..f96b3ce7fb 100644
--- a/drivers/bus/pci/linux/pci_vfio.c
+++ b/drivers/bus/pci/linux/pci_vfio.c
@@ -156,18 +156,18 @@ pci_vfio_enable_bus_memory(struct rte_pci_device *dev,
int dev_fd)
return -1;
}
- ret = pread64(dev_fd, &cmd, sizeof(cmd), offset + PCI_COMMAND);
+ ret = pread64(dev_fd, &cmd, sizeof(cmd), offset + RTE_PCI_COMMAND);
if (ret != sizeof(cmd)) {
RTE_LOG(ERR, EAL, "Cannot read command from PCI config
space!\n");
return -1;
}
- if (cmd & PCI_COMMAND_MEMORY)
+ if (cmd & RTE_PCI_COMMAND_MEMORY)
return 0;
- cmd |= PCI_COMMAND_MEMORY;
- ret = pwrite64(dev_fd, &cmd, sizeof(cmd), offset + PCI_COMMAND);
+ cmd |= RTE_PCI_COMMAND_MEMORY;
+ ret = pwrite64(dev_fd, &cmd, sizeof(cmd), offset + RTE_PCI_COMMAND);
if (ret != sizeof(cmd)) {
RTE_LOG(ERR, EAL, "Cannot write command to PCI config
space!\n");
diff --git a/drivers/event/dlb2/pf/dlb2_main.c
b/drivers/event/dlb2/pf/dlb2_main.c
index c6606a9bee..6dbaa2ff97 100644
--- a/drivers/event/dlb2/pf/dlb2_main.c
+++ b/drivers/event/dlb2/pf/dlb2_main.c
@@ -33,7 +33,6 @@
#define DLB2_PCI_EXP_DEVCTL2 40
#define DLB2_PCI_LNKCTL2 48
#define DLB2_PCI_SLTCTL2 56
-#define DLB2_PCI_CMD 4
#define DLB2_PCI_EXP_DEVSTA 10
#define DLB2_PCI_EXP_DEVSTA_TRPND 0x20
#define DLB2_PCI_EXP_DEVCTL_BCR_FLR 0x8000
@@ -47,7 +46,6 @@
#define DLB2_PCI_ERR_ROOT_STATUS 0x30
#define DLB2_PCI_ERR_COR_STATUS 0x10
#define DLB2_PCI_ERR_UNCOR_STATUS 0x4
-#define DLB2_PCI_COMMAND_INTX_DISABLE 0x400
#define DLB2_PCI_ACS_CAP 0x4
#define DLB2_PCI_ACS_CTRL 0x6
#define DLB2_PCI_ACS_SV 0x1
@@ -286,7 +284,7 @@ dlb2_pf_reset(struct dlb2_dev *dlb2_dev)
/* clear the PCI command register before issuing the FLR */
- off = DLB2_PCI_CMD;
+ off = RTE_PCI_COMMAND;
cmd = 0;
if (rte_pci_write_config(pdev, &cmd, 2, off) != 2) {
DLB2_LOG_ERR("[%s()] failed to write the pci command\n",
@@ -468,9 +466,9 @@ dlb2_pf_reset(struct dlb2_dev *dlb2_dev)
}
}
- off = DLB2_PCI_CMD;
+ off = RTE_PCI_COMMAND;
if (rte_pci_read_config(pdev, &cmd, 2, off) == 2) {
- cmd &= ~DLB2_PCI_COMMAND_INTX_DISABLE;
+ cmd &= ~RTE_PCI_COMMAND_INTX_DISABLE;
if (rte_pci_write_config(pdev, &cmd, 2, off) != 2) {
DLB2_LOG_ERR("[%s()] failed to write the pci command\n",
__func__);
diff --git a/lib/pci/rte_pci.h b/lib/pci/rte_pci.h
index a055a28592..bf2b2639f4 100644
--- a/lib/pci/rte_pci.h
+++ b/lib/pci/rte_pci.h
@@ -32,10 +32,12 @@ extern "C" {
#define RTE_PCI_VENDOR_ID 0x00 /* 16 bits */
#define RTE_PCI_DEVICE_ID 0x02 /* 16 bits */
-#define RTE_PCI_COMMAND 0x04 /* 16 bits */
/* PCI Command Register */
+#define RTE_PCI_COMMAND 0x04 /* 16 bits */
+#define RTE_PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
#define RTE_PCI_COMMAND_MASTER 0x4 /* Bus Master Enable */
+#define RTE_PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
/* PCI Status Register */
#define RTE_PCI_STATUS 0x06 /* 16 bits */
--
2.41.0
